Menu
Your Cart

Mechanics and Actuators - page 6

Model: OL-EDUARDU-BOTKIT
An expansion kit for the eduArdu from Olimex. With this kit you transform the eduArdu into a programmable robot. Note: An eduArdu is not included. Note: No mounting material is included to mount the kit to the eduArdu. It is recommended to use ..
€12.50
Ex Tax:€10.33
Model: OS-OMNIDIRCARKITDIY
A DIY car kit from Open-Smart with omnidirectional wheels. With these wheels it is possible to make many more types of movements, for example lateral movements, than with traditional wheels. This kit contains all the stuff you need (except for the ba..
€36.50
Ex Tax:€30.17
Model: OS-MOTORCARKITDIY48:1
A motor that can be used as a spare for the Car with Omnidirectional Wheels DIY Kit, for example...
€3.25
Ex Tax:€2.69
Model: OS-DUALMOTORDRIVER
A DC motor driver module from Open-Smart with 2 channels...
€3.50
Ex Tax:€2.89
Model: OS-QUADMOTORDRIVER
A DC motor driver module from Open-Smart with 4 channels. This module can be used as a spare for the Open-Smart 4WD Car with Omnidirectional Wheels. See the tab "Downloads" for the schematic diagram and an Arduino library...
€6.00
Ex Tax:€4.96
Open-Smart Vibration DC Motor Module - 3.7-5.3V
2-4 Weeks
Model: OS-VIBDCMOTORMOD
A vibration (DC) motor module from Open-Smart. The module can be easily connected through the 3p header. In addition, the module has 4 mounting holes for easy mounting. Note: The motor is only secured with an adhesive layer. In situations where th..
€3.00
Ex Tax:€2.48
Model: OPAIPROFAN Brand: Orange Pi
An active cooler for the Orange Pi AIPro...
€13.50
Ex Tax:€11.16
Model: OP5PLUS-HEATSINK Brand: Orange Pi
A large aluminum heatsink for the Orange Pi 5 Plus. The heatsink can be installed without screws and comes with a thermal pad. Note: No Orange Pi is included...
€6.50
Ex Tax:€5.37
Model: OP-PWMHEATSINKFAN Brand: Orange Pi
This Orange Pi product consists of a heatsink with a built-in PWM fan and is compatible with the Orange Pi 5 plus. Note: No Orange Pi is included...
€11.50
Ex Tax:€9.50
Perel Fan Heater - 2000W
Last chance
Model: VM-TC78020N
A compact fan heater with three settings (fan only, half power and full power). With the rotary knob a temperature limit can be set, if the temperature rises above that, the heater switches off automatically. Note: During the first use, a plastic ..
€17.00 €23.50
Ex Tax:€14.05
Model: PYSP310-6A
A peristaltic pump that can pump both air and water (water works better). Coupling pieces are supplied with which the hoses can be extended, see the next page for extra hose: Hose 3.5mm..
€5.00
Ex Tax:€4.13
Model: PIEZOMIST
This piezo disc can be used with the ultrasonic fog module, or possibly with another amplifier, to create fog. Specifications: Voltage: 3 - 12V Maximum power: 1.5W Resonance frequency: 110KHz ±10% Size mist droplets: 5 ~ 10micron ..
€0.80
Ex Tax:€0.66
Model: PWMCONTBOARD
A PWM controller with MOSFET and easy to use potentiometer to, for example, easily control a DC motor (speed) or LED (dimming). The names of the connections are visible on the printed circuit board. Specifications: Voltage range: 4.5-24V ..
€3.00
Ex Tax:€2.48
Model: QHV5160DRIVERMOD
This stepper motor driver is intended for motors with a larger power and current, suitable for NEMA17 and NEMA23, among others. This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer. Compared to ..
€12.50
Ex Tax:€10.33
Model: AE007
An active cooler for the Radxa ROCK 5A...
€4.00
Ex Tax:€3.31
Model: AE013B
An active cooler for the Radxa ROCK 5B or ROCK 5B+...
€7.50
Ex Tax:€6.20
Model: RAK-100037
A DC motor driver module from RAKwireless for the modular WisBlock system. Theoretically, the driver can also be used for a single stepper motor, but we do not recommend this because the driver has no current limiter...
€7.25
Ex Tax:€5.99
Model: RPI5-COOLER
This Active Cooler from Raspberry Pi consists of a heatsink and a PWM cooling fan. Thermal pads have been pre-applied to the heatsink for optimal heat transfer. Note: No Raspberry Pi is included...
€6.00
Ex Tax:€4.96
Model: FIXEDCOUPLER5-5MM
This rigid motor coupler is suitable for a coupling between two 5mm shafts. The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: FIXEDCOUPLER5-8MM
This rigid motor coupler is suitable for a coupling between a 5mm shaft and 8mm shaft...
€2.00
Ex Tax:€1.65
Model: FIXEDCOUPLER8-8MM
This rigid motor coupler is suitable for a coupling between two 8mm shafts. The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: RIGIDCOUPLER5-5MM-CS
This rigid motor coupler is suitable for a coupling between two 5mm shafts...
€2.25
Ex Tax:€1.86
Model: FIXEDCOUPLER5-8MM-CS
This rigid motor coupler is suitable for a coupling between a 5mm shaft and 8mm shaft...
€2.25
Ex Tax:€1.86
Model: RIGIDCOUPLER8-8MM-CS
This rigid motor coupler is suitable for a coupling between a 8mm shaft and 8mm shaft...
€2.25
Ex Tax:€1.86
Model: RTKRPIMOTORCONTR
With this HAT for the Raspberry Pi you can control two DC motors. Specifications: Input voltage: 4-36V (max 12V recommended due to heat development) Maximum current: 1A SN754410 Driver PWM control possible to control the speed See..
€12.50
Ex Tax:€10.33
Model: RZ7886
With this DC motor driver you can easily control a motor in two directions. The built-in flyback diodes protect the chip from inductive loads, such as the coils of a motor...
€1.25
Ex Tax:€1.03
Model: S3003
A reasonably powerful servo that is easy to operate. There are some plastic pieces provided that you can mount on it, where you can mount other things on. Note: This servo can draw relatively high currents, especially with load (up to approximatel..
€6.00
Ex Tax:€4.96
Model: S3003-CONT
A reasonably powerful servo that is easy to operate. There are some plastic pieces provided that you can mount on it, where you can mount other things on...
€6.00
Ex Tax:€4.96
Model: SEEED-316010005
A simple servo from Seeed Studio. This servo has a cable with a Grove connector, so you can easily connect this servo to other Seeed Studio products. See the following page for more information: Seeed Studio Grove Servo...
€9.00
Ex Tax:€7.44
Model: SERVODISC25T
A standard metal servo disc suitable for usage with MG995/MG996 type servo's(25T). You can mount four M3 bolts on the disc.(four small bolts included) The exact dimensions can be found in the images...
€0.50
Ex Tax:€0.41
Model: SERVOFREEWH25T
A metal attachment for a dual-axis servo. This freewheel is stronger than the plastic version that is usually included...
€0.50
Ex Tax:€0.41
Model: SERVOGRIPPER
This aluminum mechanical robot gripper can be used to grab and move small objects around. With mounting holes for a servo motor. Specifications: Weight: 68 g (without servo) Maximum gripper width: 55 mm Two 3mm holes for mounting the gri..
€6.00
Ex Tax:€4.96
Model: SERVOTESTER
With this servo driver you can easily test the correct operation of servo's. The servo tester can test in 3 different methods (choose by 'select' button') : Manual mode: By adjusting the rotary knob the speed can be adjusted Neutral mode: The..
€3.00
Ex Tax:€2.48
Model: SG90-DIGITAL
A compact servo that is very easy to control. This version is digital, giving it a higher accuracy compared to the standard analog SG90. Note: If the servo has less than 180 degrees range, the minimum (500us) and maximum pulse width (2500us) must ..
€3.50
Ex Tax:€2.89
Model: SG90
A nice servo to begin with. You can already perform quite some movements with it! This servo is very easy to control. Note: If the servo has less than 180 degrees range, the minimum (500us) and maximum pulse width (2500us) must be adjusted in the ..
€3.25
Ex Tax:€2.69
Model: SHOCKABSNEMA17-BOLTS
A shock absorber for NEMA17 stepper motors. The damper has M3 screw thread on one side and 3.4mm mounting holes on the other. Specifications: Suitable for form factor: NEMA17 (42 x 42mm) Material: Metal and rubber Dimensions: See images ..
€3.25
Ex Tax:€2.69
Model: DCMOTOR
A small DC motor...
€1.25
Ex Tax:€1.03
Model: 140DCMOTOR
A small DC motor...
€1.75
Ex Tax:€1.45
Model: 130DCM3V
A small DC motor with soldered DuPont wires...
€1.50
Ex Tax:€1.24
Model: XG-07A-12V
This electronic lock is perfect for cabinet doors, drawers and more. The lock opens by applying a voltage to the red and black wire (polarity does not matter), at this moment the included hook that slides into the lock springs out. Once the lock is c..
€7.75
Ex Tax:€6.41
Model: XG-07A-5V
This electronic lock is perfect for cabinet doors, drawers and more. The lock opens by applying a voltage to the red and black wire (polarity does not matter), at this moment the included hook that slides into the lock springs out. Once the lock is c..
€7.75
Ex Tax:€6.41
Model: RPIFAN3X3
This fan is specially made for the Raspberry Pi Housing with option for fan. Extra bolts and nuts are supplied with the fan if you want to place them in a different environment. The 5V of the Raspberry Pi is on pin 4 (+, red wire) and pin 6 (-, black..
€2.50
Ex Tax:€2.07
Model: HYY4Z08V000-L45-D2
A small vibrating DC motor. This motor is in a rubber piece that is flat on one side for flat mounting with, for example, glue. Note: The thin wires can vibrate and deattach if the motor and the cables are not properly secured in your setup. Use h..
€1.00
Ex Tax:€0.83
Model: 1027VIBRATEDCMOTOR
A small flat vibration DC motor with an adhesive layer for easier assembly. Note: The thin wires can vibrate and deattach if the motor and the cables are not properly secured in your setup. Use hot glue or other glue to protect these thin wires ag..
€1.00
Ex Tax:€0.83
Model: JF-0530B-12V
This solenoid functions as an electromagnet and can retract a pin. The spring pushes the pin out by default, but the pin is pulled in when the solenoid is activated. Specifications: Voltage: 12V DC Current: ~800mA on 12V (only for short-te..
€4.00
Ex Tax:€3.31
Model: JF-0530B-24V
This solenoid functions as an electromagnet and can retract a pin. The spring pushes the pin out by default, but the pin is pulled in when the solenoid is activated. Specifications: Voltage: 24V DC Current: ~800mA on 24V (only for short-te..
€4.00
Ex Tax:€3.31
Model: JF-0530B-6V
This solenoid functions as an electromagnet and can retract a pin. The spring pushes the pin out by default, but the pin is pulled in when the solenoid is activated. Specifications: Voltage: 6V DC Current: ~1600mA on 6V (only for short-ter..
€4.00
Ex Tax:€3.31
Model: SOLVALVES211B
This solenoid valve is bistable (latching), by giving a pulse with a positive current the valve is opened and with a pulse with a negative current the valve is closed again. This allows the valve to be controlled with an H-bridge or motor driver. ..
€9.50
Ex Tax:€7.85
Model: SOLVALVE308C4
This solenoid valve is bistable (latching), by giving a pulse with a positive current the valve is opened and with a pulse with a negative current the valve is closed again. This allows the valve to be controlled with an H-bridge or motor driver. ..
€8.00
Ex Tax:€6.61
Showing 251 to 300 of 394 (8 Pages)
1
false
true
true
Remove
Change
tr