Menu
Your Cart

Mechanics and Actuators - page 5

Model: M5STACK-A090-V12 Brand: M5Stack
A DC and servo motor driver from M5Stack made for the Atom series. The module contains a microcontroller (STM32) which controls the motor drivers, this microcontroller itself can be controlled with I2C. There is also a current sensor in the modu..
€10.50
Ex Tax:€8.68
Model: M5STACK-A132 Brand: M5Stack
The Atomic Stepmotor Base is a stepper motor driver module for the M5Atom series development boards. The module has a built-in DC/DC converter that converts 9-18V external power to 5V for the M5Atom...
€11.50
Ex Tax:€9.50
Model: M5STACK-K038-B
Note: This product does not have a protection circuit for the 16340 Li-ion battery. Therefore, always turn off the product after use with the switch to prevent the battery from discharging too far. If the protection circuit of the battery of the M5St..
€50.75
Ex Tax:€41.94
Model: M5STACK-K037 Brand: M5Stack
..
€38.50
Ex Tax:€31.82
Model: M5STACK-U181 Brand: M5Stack
A motor driver module from M5Stack to control a brushless DC motor (BLDC). The module contains a microcontroller that can be controlled via I2C. The microcontroller in turn controls the motor driver. Both the driver and the motor are powered via the ..
€8.00
Ex Tax:€6.61
Model: M5STACK-A100 Brand: M5Stack
The M5Stack C-Back HAT is a module made for the M5StickC (Plus). The module works via I2C communication with the M5StickC. Note: M5StickC not included...
€10.00
Ex Tax:€8.26
Model: M5STACK-U102 Brand: M5Stack
The Catch Unit is a robotic gripper from M5Stack. With a single servo and a gear mechanism, both arms of the gripper are moved. The unit has several places with which it can be attached to LEGO®. Specifications: Supply voltage: 4.2-6V DC S..
€8.50
Ex Tax:€7.02
Model: M5STACK-M013-V11 Brand: M5Stack
A fan module for the M5Core series...
€15.50
Ex Tax:€12.81
Model: M5STACK-M025-B Brand: M5Stack
The GoPlus2 from M5Stack is a DC motor and servo driver that is controlled by an STM32F030 chip. This module contains 2 DC motor ports, and 4 servo motor ports. In addition, the GoPlus2 also has 3 Grove-B (GPIO) ports, and it is possible to receive a..
€25.00
Ex Tax:€20.66
Model: M5STACK-M035 Brand: M5Stack
This is a stepper motor module for the M5Core with three stepper motor drivers and the possibility to connect three end stops. There are also additional modules available such as a 5V fan module to cool down the drivers. Specifications: Supply v..
€32.50
Ex Tax:€26.86
Model: M5STACK-U160 Brand: M5Stack
A motor driver (H-bridge) from M5Stack that works via I2C. The module has several safety features to protect the motor...
€12.00
Ex Tax:€9.92
Model: M5STACK-U160-V11 Brand: M5Stack
A motor driver (H-bridge) from M5Stack with current sensor, which works via I2C. Communication handled via a built-in microcontroller, which in turn communicates with the motor driver and current sensor. The module has various safety features to prot..
€10.25
Ex Tax:€8.47
Model: M5STACK-M036 Brand: M5Stack
A ODrive motor driver module from M5Stack. This module is based on the open source motion control solution ODrive. The module can drive a single three-fase brushless motor with encoder (also like a servo motor). Note: No motor or encoder is includ..
€49.50
Ex Tax:€40.91
Brand: M5Stack
The Roller485 Unit is a BLDC motor with integrated control, which can rotate 360°. The module contains a microcontroller that can communicate via I2C or RS485. This in turn communicates with the motor driver, encoder, display and digital LEDs...
€39.50
Ex Tax:€32.64
Model: M5STACK-U182
The Roller485 Unit is a BLDC motor with integrated control, which can rotate 360°. The module contains a microcontroller that can communicate via I2C or RS485. This in turn communicates with the motor driver, encoder, display and digital LEDs. The ro..
€47.00
Ex Tax:€38.84
M5Stack RollerCAN Lite Unit - with BLDC motor - without Slipring
2-4 Weeks
Model: M5STACK-U188-Lite Brand: M5Stack
The RollerCAN Unit is a BLDC motor with integrated control, which can rotate 360°. The module contains a microcontroller that can communicate via I2C or CAN. This in turn communicates with the motor driver, encoder, display and digital LEDs...
€44.50
Ex Tax:€36.78
Model: M5STACK-U188 Brand: M5Stack
The RollerCAN Unit is a BLDC motor with integrated control, which can rotate 360°. The module contains a microcontroller that can communicate via I2C or CAN. This in turn communicates with the motor driver, encoder, display and digital LEDs. The..
€50.00
Ex Tax:€41.32
M5Stack RoverC Pro Hat - for M5StickC
On request
Model: M5STACK-K036-B Brand: M5Stack
There is no product description available yet. See the following page for information about this product: M5Stack RoverC Pro Hat - for M5StickC Note: This product does not have a protection circuit for the 16340 Li-ion battery. Therefore, always t..
€78.00
Ex Tax:€64.46
Model: M5STACK-U075 Brand: M5Stack
The M5Stack Servo Hat is add-on module for the M5StickC*. The module contains a PWM controlled ES9251II servo and can be attached at the top of a M5StickC. This Hat is programmable with Arduino and UIFlow (Blockly, Python). For more information, s..
€12.00
Ex Tax:€9.92
Model: M5STACK-A076-C Brand: M5Stack
A kit of M5Stack consisting of 2 servos and all kinds of (LEGO®) accessories. With this kit you can easily incorporate 2 servos into your LEGO®/M5Stack project...
€13.00
Ex Tax:€10.74
Model: M5STACK-A076-B Brand: M5Stack
A kit of M5Stack consisting of 2 servos and all kinds of (LEGO®) accessories. With this kit you can easily incorporate 2 servos into your LEGO®/M5Stack project. For more information, see: M5Stack Servo Kit 180°/360°. Note: If the servo has less..
€16.75
Ex Tax:€13.84
Model: M5STACK-M014-B Brand: M5Stack
This is a servo driver module for the M5Core that can control up to 16 different servo motors. The module has a built-in voltage converter that brings the input voltage to the correct servo voltage. Specifications: Input voltage: 6-12V DC (v..
€16.25
Ex Tax:€13.43
Model: M5STACK-A076 Brand: M5Stack
A standard SG90 servo from M5Stack. This servo is very easy to control. For more information, see: M5Stack SG90 Servo. Note: If the servo has less than 180 degrees range, the minimum (500us) and maximum pulse width (2500us) must be adjusted in ..
€7.50
Ex Tax:€6.20
Model: M5STACK-M039-V11
This is a stepper motor module from M5Stack for the M5Core with three HR8825 stepper motor drivers and the option to connect four limit switches. This module has adjustable current per driver and supports microstepping. The module communicates via I2..
€25.75
Ex Tax:€21.28
Model: M5STACK-U159 Brand: M5Stack
This is a HAT for the M5StickC (Plus) with a vibration motor. It can produce various vibration effects and is used for information prompts and haptic feedback...
€5.50
Ex Tax:€4.55
Model: M5STACK-U059 Brand: M5Stack
This is a module with vibration motor and a Grove connection for the M5Stack. See the following page for more information: M5Stack Vibrator Motor Unit...
€5.00
Ex Tax:€4.13
Model: M5STACK-U101 Brand: M5Stack
The Watering Unit from M5Stack is a capacitive soil moisture sensor module. In addition, this unit also contains a water pump that can be connected to a water source with the supplied hose. For example, with this module you can easily react to l..
€15.00
Ex Tax:€12.40
Model: TK-SERVO-THROWER
With this kit you can easily make a mechanism to drop something using a servo. Note: No servo or servo arm is included. Servos with mounting holes spaced ~48x10mm apart will fit, these are most standard (so no mini or micro) servos , such as this ..
€4.50
Ex Tax:€3.72
Model: TK-25T-ARM-HALF-2H
A metal servo arm for standard 25T servos...
€2.00
Ex Tax:€1.65
Model: TK-25T-ARM-HALF-3H
A metal servo arm for standard 25T servos...
€2.00
Ex Tax:€1.65
Model: TK-25T-ARM-HALF-4H
A metal servo arm for standard 25T servos...
€2.00
Ex Tax:€1.65
Model: TK-25T-ARM-OPEN
A metal servo arm for standard 25T servos. This version can be clamped onto a servo axis with the two screws...
€2.00
Ex Tax:€1.65
Model: TK-25T-ARM-4H
A metal servo arm for standard 25T servos...
€2.00
Ex Tax:€1.65
Model: TK-25T-ARM-6H
A metal servo arm for standard 25T servos...
€2.00
Ex Tax:€1.65
Model: MG90S
A nice servo to begin with. You can already perform quite some movements with it! This servo is very easy to control. The MG90S is almost the same as the SG90, but has metal gears for more speed and power...
€5.00
Ex Tax:€4.13
Model: MG996R
A fairly powerful servo that is easy to control and largely compatible with the TowerPro MG996R servo. There are a couple of pieces of plastic that you can mount on it, where you can then mount other things on. Note: This servo can draw relatively..
€7.00
Ex Tax:€5.79
Model: MG996R-CONT
A fairly powerful servo that is easy to control and largely compatible with the TowerPro MG996R servo. There are a couple of pieces of plastic that you can mount on it, where you can then mount other things on...
€7.00
Ex Tax:€5.79
Model: MX1508MOD
This small module can control two DC motors. Specifications: Supply voltage: 2 - 9.6V DC Signal voltage: 3.3 - 5V Maximum continuous current per bridge: 1.5A Maximum peak current per bridge: 2.5A Number of channels: 2 Mounting hole..
€2.50
Ex Tax:€2.07
Model: MYT-LM10LUU-2PCS
A good quality bearing from MYT. Note: The linear bearings are lubricated with oil for protection against oxidation. Before installation it is recommended to wipe off the oil and apply grease...
€4.50
Ex Tax:€3.72
Model: MYT-LM10UU-2PCS
A good quality bearing from MYT. Note: The linear bearings are lubricated with oil for protection against oxidation. Before installation it is recommended to wipe off the oil and apply grease...
€2.75
Ex Tax:€2.27
Model: MYT-LM12LUU
A good quality bearing from MYT. Note: The linear bearing is lubricated with oil for protection against oxidation. Before installation it is recommended to wipe off the oil and apply grease...
€2.50
Ex Tax:€2.07
Model: MYT-LM12UU-2PCS
A good quality bearing from MYT. Note: The linear bearings are lubricated with oil for protection against oxidation. Before installation it is recommended to wipe off the oil and apply grease...
€2.75
Ex Tax:€2.27
Model: MYT-LM6LUU-2PCS
A good quality bearing from MYT. Note: The linear bearings are lubricated with oil for protection against oxidation. Before installation it is recommended to wipe off the oil and apply grease...
€4.50
Ex Tax:€3.72
Model: MYT-LM6UU-2PCS
A good quality bearing from MYT. Note: The linear bearings are lubricated with oil for protection against oxidation. Before installation it is recommended to wipe off the oil and apply grease...
€2.50
Ex Tax:€2.07
Model: MYT-LM8LUU-2PCS
A good quality bearing from MYT. Note: The linear bearings are lubricated with oil for protection against oxidation. Before installation it is recommended to wipe off the oil and apply grease...
€4.50
Ex Tax:€3.72
Model: MYT-LM8UU-2PCS
A good quality bearing from MYT. Note: The linear bearings are lubricated with oil for protection against oxidation. Before installation it is recommended to wipe off the oil and apply grease...
€2.50
Ex Tax:€2.07
Model: MYT-SC12UU
A good quality bearing from MYT. Note: The linear bearing is lubricated with oil for protection against oxidation. Before installation it is recommended to wipe off the oil and apply grease...
€4.00
Ex Tax:€3.31
Model: MYT-SC8UU
A good quality bearing from MYT. Note: The linear bearing is lubricated with oil for protection against oxidation. Before installation it is recommended to wipe off the oil and apply grease...
€3.75
Ex Tax:€3.10
Model: OL-BB-VNH3SP30
A motor driver from Olimex for one DC motor. Note: To achieve 30A RMS, additional cooling via a heatsink and possibly a fan is required...
€12.75
Ex Tax:€10.54
Showing 201 to 250 of 394 (8 Pages)
1
false
true
true
Remove
Change
tr