Menu
Your Cart

Mechanics and Actuators - page 4

Model: GT2-BELT-300MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 300mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€3.00
Ex Tax:€2.48
Model: GT2-BELT-320MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 320mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€3.00
Ex Tax:€2.48
Model: GT2-BELT-400MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 400mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€3.50
Ex Tax:€2.89
Model: GT2-BELT-610MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 610mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€4.00
Ex Tax:€3.31
Model: GT2-BELT-852MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 852mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip. Specifications: Timing belt type: GT2 ..
€4.50
Ex Tax:€3.72
Model: GT2316T
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm. Specifications: 16 Teeth Inner diameter 3mm Outer diameter: 13mm Height: 8.5mm Suitable for belts of 6mm See image for the exact dimensions...
€1.50
Ex Tax:€1.24
Model: GT2316S
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm. Specifications: Toothless, but has the same diameter as a GT2-16 with 16 teeth pulley Inner diameter 3mm Outer diameter: 13mm Height: 8.5mm Suitable for ..
€1.50
Ex Tax:€1.24
Model: GT2520T
A GT2 belt pulley with an internal roller bearing and an inner diameter of 5mm. Specifications: 20 Teeth Inner diameter 5mm Outer diameter: 18mm Height: 8.5mm Suitable for belts of 6mm See image for the exact dimensions...
€1.50
Ex Tax:€1.24
Model: GT2320T
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm. Specifications: 20 Teeth Inner diameter 3mm Outer diameter: 18mm Height: 8.5mm Suitable for belts of 6mm See image for the exact dimensions...
€1.50
Ex Tax:€1.24
Model: GT2320S
A GT2 belt pulley with an internal roller bearing and an inner diameter of 3mm. Specifications: Toothless, but has the same diameter as a GT2-20 with 20 teeth pulley Inner diameter 3mm Outer diameter: 18mm Height: 8.5mm Suitable for ..
€1.50
Ex Tax:€1.24
Model: GT2520S
A GT2 belt pulley with an internal roller bearing and an inner diameter of 5mm. Specifications: Toothless, but has the same diameter as a GT2-20 with 20 teeth pulley Inner diameter 5mm Outer diameter: 18mm Height: 8.5mm Suitable for ..
€1.50
Ex Tax:€1.24
Model: COOL11x11
Suitable for providing small chips with a little air cooling. Material is aluminum in combination with a black thermally conducting adhesive layer of 3M...
€0.40
Ex Tax:€0.33
Model: HEATSINKLED1-3W
This cooling block is required if you want to use the corresponding 1W to 3W LED at full brightness. These LEDs produce a lot of heat, which has to be cooled. The LED can be soldered to the cooling block. Try to place the LED as close to the cool..
€0.20
Ex Tax:€0.17
Model: WS-17790
A set of heat sinks to provide your Raspberry Pi with a little extra cooling. This set consists of three heat sinks with an adhesive layer for easy placement of the cooling blocks. Dimensions per colored heat sinks (approximately): ..
€1.50
Ex Tax:€1.24
Model: HY-DIV268N-5A
Easy to set stepper motor control for a bipolar stepper motor .  Specifications: Voltage range (power supply): 8-42VDC (12-36V recommended) Voltage range (signals): 2.0-5.5V Maximum peak current per bridge (adjustable via dipswitch)..
€13.50
Ex Tax:€11.16
Keyestudio 4DOF Mechanical Arm Claw - DIY Kit
On request
Model: KS5002
The Beetlebot from Keyestudio is a smart robot that is controlled by an ESP32 and is compatible with LEGO building blocks. Furthermore, the Beetlebot can avoid obstacles and follow black lines. This robot also has three different shapes, each shape h..
€65.00
Ex Tax:€53.72
Model: KS0007
The Keyestudio L298P DC-Motor Driver shield is compatible with the Arduino uno R3 and can be stacked onto the board...
€9.50
Ex Tax:€7.85
Keyestudio L9110 Fan Module
New
Model: Keyestudio-KS0168
A motor module with a small propeller from Keyestudio...
€3.50
Ex Tax:€2.89
Keyestudio Mini Caterpillar Tank Robot V3 - DIY Kit
On request
Model: KFL8
Mounting for rotating 8mm shaft. Used for the Z-axis of a 3D printer or CNC machine. Specifications: Dimensions: 48x27x11.2mm Inner diameter: 8mm Mounting hole: M5 See images for the exact dimensions...
€2.50
Ex Tax:€2.07
Model: KP08
Mounting for rotating 8mm shaft. Used for the Z-axis of a 3D printer or CNC machine. Specifications: Dimensions: 55x30x12mm Inner diameter: 8mm Mounting hole: M5 See images for the exact dimensions...
€2.50
Ex Tax:€2.07
Model: TEC1-12702
..
€4.25
Ex Tax:€3.51
Model: TEC1-12703
..
€4.00
Ex Tax:€3.31
Model: TEC1-12704
..
€4.00
Ex Tax:€3.31
Model: TEC1-12705
..
€4.00
Ex Tax:€3.31
Model: TEC1-12706
..
€4.00
Ex Tax:€3.31
Model: TEC1-12708
..
€4.25
Ex Tax:€3.51
Model: TEC1-12710
..
€4.50
Ex Tax:€3.72
Model: TEC1-12712
..
€4.50
Ex Tax:€3.72
Model: TEC1-12715
..
€4.75
Ex Tax:€3.93
Model: MOTORSHIELD
This shield is based on an Adafruit shield and offers control for two servo motors and four DC motors or two bipolar/unipolar stepper motors. The shield has a shift register built in which can save a large number of pins. Specifications: ..
€5.00
Ex Tax:€4.13
Model: L293D
A commonly used motor driver with built-in H-bridges to control, for example, two DC motors or a (small) stepper motor...
€1.75
Ex Tax:€1.45
Model: L298N
A motor controller for two DC motors. Specifications: Voltage range (signals): 0-5V Voltage range (power supply for the motors): 5-35V DC Maximum current (per bridge): 2A See the following page for a tutorial: Arduino Modules - L298..
€5.00
Ex Tax:€4.13
Model: L9110HFANMOD
A DC motor fan module with an L9110 driver that can drive a DC motor in two directions...
€2.50
Ex Tax:€2.07
Model: L9110S
A motor controller for two DC motors or one bipolar stepper motor, consisting of two L9110S chips. The names of the connections are visible on the PCB...
€3.50
Ex Tax:€2.89
Model: TR8X2-30
Leadscrew for 3D printers and CNC machines...
€10.50
Ex Tax:€8.68
Model: TR8X2-50
Leadscrew for 3D printers and CNC machines...
€12.50
Ex Tax:€10.33
A light slot sensor module for the DIY car kits. With this module the speed of a wheel can be measured. This light sensor has a small section where the light is directed to a phototransistor. The phototransistor then responds when the li..
€2.75
Ex Tax:€2.27
Model: LILYGO-H530
The TTGO T-Motor from LilyGO is a microcontroller based on an ESP32 with a TMC2209 stepper motor driver and a magnetic encoder, making it suitable for use as a closed-loop stepper motor driver. The T-Motor can be easily mounted on a NEMA17 motor with..
€30.00
Ex Tax:€24.79
Model: LILYGO-H247
The LilyGO T-Thruster is a kit based on an ESP8266 microcontroller and two DC motors. The kit can be used to make a remote-controlled airplane, for example with styrofoam. See the following page to get started with T-Thruster and download the App,..
€10.50
Ex Tax:€8.68
Model: D2-1TRACKING-CARKITDIY
An intelligent DIY car kit that can follow a black colored line on the ground using 2 white LEDs and 2 photosensitive resistors. This car does not need to be programmed, and it is only necessary to solder all parts to the PCB mounting plate. The car ..
€9.00
Ex Tax:€7.44
Model: JK28H30H0644A-LIN100MM
A compact 4-pin bipolar stepper motor with a linear guide suitable for various applications...
€45.50
Ex Tax:€37.60
Model: JK28H30H0644A-LIN50MM
A compact 4-pin bipolar stepper motor with a linear guide suitable for various applications...
€36.50
Ex Tax:€30.17
Model: JK42HSC40-1704ATL2
This linear bipolar stepper motor is suitable for various applications, such as 3D printers. The motor can be easily controlled via the convenient JST-PH connector block and can be mounted directly onto a lead screw. You can find suitable leadscrews ..
€21.50
Ex Tax:€17.77
Model: LM12LUU
A linear bearing of the LM12LUU type. This linear bearing is used to make the frame stiffer for example Anet A8 and DIY coreXY printers. Specifications: Internal diameter: 12mm External diameter: 21mm Dimensions: 21x21x57mm Weight..
€3.50
Ex Tax:€2.89
Model: LM12UU
A linear bearing of the LM12UU type. This linear bearing is used to make the frame stiffer for example Anet A8 and DIY coreXY printers. Specifications: Internal diameter: 12mm External diameter: 21mm Dimensions: 21x21x30 mm W..
€2.00
Ex Tax:€1.65
Model: M5STACK-M138 Brand: M5Stack
The 4EncoderMotor Module is a 4-channel DC motor driver module from M5Stack. The motor voltage can be selected via a switch so that it is either 5V (max 10W total) or equal to the supply voltage. The module also contains an extra voltage converter th..
€17.50
Ex Tax:€14.46
Model: M5STACK-U165 Brand: M5Stack
The 8Servos Unit from M5Stack is a powerful servo driver for 8 servos where the power consumption of the servos (combined) can be measured. It is controlled by an STM32F030F4 microcontroller and uses I2C communication. The unit is ideal for robotics ..
€9.00
Ex Tax:€7.44
Model: M5STACK-A092 Brand: M5Stack
The Atomic H-Driver Base is an H-bridge motor driver module from M5Stack made for an M5Atom. In addition to the motor driver, the module also has a voltage converter that can power the Atom, so it does not need to be powered externally...
€8.50
Ex Tax:€7.02
Showing 151 to 200 of 394 (8 Pages)
1
false
true
true
Remove
Change
tr