Open-Smart 4WD Car with Omnidirectional Wheels and Bluetooth - DIY Kit

A DIY car kit from Open-Smart with omnidirectional wheels. With these wheels it is possible to make many more types of movements, for example lateral movements, than with traditional wheels. This kit contains all the stuff you need (except for the batteries) to make a complete robot car, which can be controlled via Bluetooth.

The mounting plate clearly indicates where all modules and other components should be placed. For more clarity, there is also a video from Open-Smart that explains step by step how to assemble the kit, which can be found under the tab "Downloads". The software must also be installed on the Uno R3 by your self, the software can also be found in the downloads

Specifications:

• Dimensions of mounting plate: 21 x 10 x 1.5mm

Package contents:

• 1x PCB mounting plate
• 1x Open-Smart Uno R3
• 1x USB-A to USB-C cable 100cm
• 1x Open-Smart easy IO shield pro
• 1x Ultrasonic sensor
• 1x Ultrasonic sensor acrylic holder
• 1x Bluetooth module
• 1x Open-Smart quad motor driver
• 4x Motor with 15cm cable
• 4x Omnidirectional wheel
• 1x Battery holder 2x 18650
• 2x JST-XH 2p cable 12cm
• 5x JST-XH 4p cable 20cm
• 1x Screwdriver
• 4x Nylon rivet
• 2x Spacer (M3x6+6)
• 2x Screw (M3x2.5)
• 10x Screw (M3x5)
• 8x Screw (M3x30)
• 12x Nut (M3)

Note: This kit is excluding 2x 18650 Li-ion batteries, so these have to be purchased separately. They can be found here: 18650 batteries

Note: This product does not charge or protect the 18650 batteries. When using 18650 batteries without a protection circuit, the batteries can be discharged too deep or high currents will flow in case of accidental short circuit. We therefore recommend using only 18650 batteries with a built-in protection circuit.

Check the tab "Downloads" for more information and/or downloads.