Menu
Your Cart

Microcontroller Boards - page 4

Model: LILYGO-Q391
The T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in LoRa chip and a GNSS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be progra..
€43.00
Ex Tax:€35.54
Model: LILYGO-Q389
The T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in LoRa chip and a GNSS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be progra..
€34.75
Ex Tax:€28.72
Model: LILYGO-H616
The T-Beam-S3 from LilyGO is a microcontroller based on an ESP32-S3 including a built-in LoRa chip, a GNSS module and several sensors. The T-Beam can also be use with the SoftRF software: SoftRF..
€53.00
Ex Tax:€43.80
Model: LILYGO-H659
The T-Beam-S3 from LilyGO is a microcontroller based on an ESP32-S3 including a built-in LoRa chip, a GNSS module and several sensors. The T-Beam can also be use with the SoftRF software: SoftRF Note: LilyGO has changed the model from H615 to H..
€79.75
Ex Tax:€65.91
Model: LILYGO-H703
A development board based on an ESP32-S3 microcontroller which has various sensors, including a camera and microphone...
€35.50
Ex Tax:€29.34
Model: LilyGO-H591
The TTGO T-Camera S3 from LilyGO is a microcontroller based on an ESP32-S3 with a built-in camera, microphone, a PIR sensor and an OLED display. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable not included..
€20.25
Ex Tax:€16.74
Model: LILYGO-H644
A development board based on an ESP32-S3 microcontroller which has various sensors, including a camera and microphone...
€22.00
Ex Tax:€18.18
Model: LILYGO-H626
A development board based on an ESP32-S3 microcontroller which has various sensors, including a camera and microphone...
€29.00
Ex Tax:€23.97
LilyGO T-CAN485 - ESP32 Development Board - CAN Bus - RS485
2-4 Weeks
Model: LILYGO-Q331
A development board from LilyGO based on an ESP32 microcontroller. This board has both a CAN bus and an RS485 interface...
€16.50
Ex Tax:€13.64
Model: LILYGO-H623
T-Deck is a development board based on an ESP32-S3 microcontroller. The keyboard and LoRaWi-Fi/Bluetooth connectivity make it very suitable for sending messages wirelessly. Note: Unlike most Grove products, the Grove connector on the T-Deck has a ..
€69.75
Ex Tax:€57.64
T-Deck Plus is a development board based on an ESP32-S3 microcontroller. The keyboard and LoRaWi-Fi/Bluetooth connectivity make it very suitable for sending messages wirelessly. Note: The pins of the Grove interface are used for the internal GNSS ..
€82.50
Ex Tax:€68.18
Model: LILYGO-H495
The T-Display from LilyGO is a microcontroller based on an ESP32 with a built-in 1.02 inch E-paper E-ink display. Note: This board does not have a built-in USB to serial converter, to program the board the following converter is required: TTGO T-U..
€13.50
Ex Tax:€11.16
LilyGO T-Display RP2040 - with 1.14 inch TFT Display
Discontinued
Model: LILYGO-H520
The T-Display RP2040 from LilyGO is a microcontroller based on an RP2040 from Raspberry Pi with a built-in 1.14 inch LCD display...
€9.50
Ex Tax:€7.85
Model: LILYGO-H619
The LilyGO TTGO T-Display-S3 AMOLED is a microcontroller based on an ESP32-S3 with a built-in AMOLED display. It is easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable no..
€31.25
Ex Tax:€25.83
Model: LILYGO-H705
The LilyGO TTGO T-Display-S3 AMOLED is a microcontroller based on an ESP32-S3 with a built-in AMOLED display with touchscreen. It is easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and/or powere..
€36.00
Ex Tax:€29.75
Model: LILYGO-H557
This T-Dongle module from LilyGO is a microcontroller based on an ESP32-S2 chip. This board has two USB connections, a type-A male and a type-A female. As a result, the module can not only be used as a (virtual) USB device (such as a keyboard), but a..
€13.00
Ex Tax:€10.74
LilyGO T-Dongle-S3 - ESP32-S3
2-4 Weeks
Model: LILYGO-K193
This T-Dongle module from LilyGO is a microcontroller based on an ESP32-S3 chip. This board has support for Wi-Fi, Bluetooth and an SD card slot. Thanks to the built-in USB host controller, you can use it to create a wireless keyboard, for example...
€14.00
Ex Tax:€11.57
Model: LILYGO-K167
LilyGO's T-Embed is a microcontroller board with a lot of features, such as an IPS display, rotary encoder, speaker and more. This version has a black front and comes without a case on the back...
€32.75
Ex Tax:€27.07
Model: LILYGO-K209
LilyGO's T-Embed is a microcontroller board with a lot of features, such as an IPS display, rotary encoder, speaker and more. This version has a complete black case...
€37.00
Ex Tax:€30.58
Model: LILYGO-K201
LilyGO's T-Embed is a microcontroller board with a lot of features, such as an IPS display, rotary encoder, speaker and more. This version has a white front and comes without a case on the back...
€35.00
Ex Tax:€28.93
Model: LILYGO-K210
LilyGO's T-Embed is a microcontroller board with a lot of features, such as an IPS display, rotary encoder, speaker and more. This version has a white front with a white button and comes without a case on the back...
€34.50
Ex Tax:€28.51
Model: LILYGO-H744 Brand: DFRobot
..
€26.00
Ex Tax:€21.49
Model: LILYGO-H683
The LilyGo T-ETH Lite camera shield is compatible with the LilyGO T-ETH Lite. Note: This product is only compatible with the ESP32-S3 version of the LilyGO T-ETH Lite...
€13.50
Ex Tax:€11.16
Model: LILYGO-H673
The T-ETH-Lite from LilyGO is a microcontroller based on ESP32-WROVER-E. The board has an ethernet port and a micro-SD card slot. Note: This board has no USB port or USB to serial converter. To program the board, an external USB to serial converte..
€16.00
Ex Tax:€13.22
Model: LILYGO-H674
The T-ETH-Lite from LilyGO is a microcontroller based on ESP32-S3. The board has an ethernet port and a micro-SD card slot. Note: This board has no USB port or USB to serial converter. To program the board, an external USB to serial converter is r..
€17.00
Ex Tax:€14.05
Model: LILYGO-H622
A development board based on an ESP32-S3 microcontroller with an FPGA. The board can be expanded with the following shield: T-FPGA Shield..
€22.00
Ex Tax:€18.18
Model: LILYGO-K146
A wristband based on an S78G System in Chip (SiP) that integrates a number of chips into one, including a microcontroller, LoRa chip and GNSS (GPS) chip. Note: The same wristband is used as for the TTGO T-Wristband modules, however, this product i..
€39.25
Ex Tax:€32.44
Model: LILYGO-H438-01
Note: The USB-C port on this module is only intended to power the module. To program this module, the following module is required (see images): TTGO TTL USB Serial Port Adapter for T-Internet PoE..
€20.00
Ex Tax:€16.53
Model: LILYGO-Q416
The TTGO T-PCIE from LilyGO is a microcontroller based on an ESP32. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable not included). ..
€15.00
Ex Tax:€12.40
Model: LILYGO-H553
The T-PicoC3 from LilyGO is a microcontroller that uses both the ESP32-C3 and the RP2040 chip with also a built-in 1.14 inch TFT display. Thanks to the built-in USB to serial converters, both microcontrollers are easy to program, even as Arduinos. Th..
€12.00
Ex Tax:€9.92
Model: LILYGO-Q428
A PoE (Power over Ethernet) module from LilyGO. With this module it possible to connect to a router via an Ethernet cable and simultaneously supply the module with power via the same cable using PoE. This module is based on an ESP32-WROVER-E chip, wh..
€39.00
Ex Tax:€32.23
Model: LILYGO-H579
A very small microcontroller with built-in display from LilyGO. It is easy to program, also like an Arduino. Compared to the normal T-QT, this board has extra PSRAM, but less flash memory. In addition, this new version also has a Li-ion charging..
€12.00
Ex Tax:€9.92
Model: LILYGO-H588
A very small microcontroller with built-in display from LilyGO. It is easy to program, also like an Arduino. Compared to the normal T-QT, this board also has a Li-ion charging circuit built in...
€12.00
Ex Tax:€9.92
Model: LILYGO-H628
A very small microcontroller with built-in display from LilyGO. It is easy to program, also like an Arduino. Compared to the normal T-QT, this board also has a Li-ion charging circuit built in...
€12.25
Ex Tax:€10.12
Model: LILYGO-H561
The T-Relay-8 is a handy relay module with Wi-Fi and Bluetooth. This module has 8 relays and an ESP32-Wrover. Note: This board does not have a built-in USB to serial converter, to program the board the following converter is needed: TTGO T-U2T..
€23.25
Ex Tax:€19.21
Model: LILYGO-H629
The T-RelayS3 is a handy relay module with Wi-Fi and Bluetooth. This module contains 6 relays and an ESP32-S3 microcontroller. The module comes with a housing that can be mounted on a DIN rail. In addition, the design offers the possibility to easily..
€39.50
Ex Tax:€32.64
Model: LILYGO-H597
A microcontroller with circular touchscreen display from LilyGO. It is easy to program, also like an Arduino. Note: The display is not yet glued to the rest of the module. Carefully remove the module from its packaging by pulling the clear tab. ..
€36.00
Ex Tax:€29.75
Model: LILYGO-H583
A microcontroller with circular touchscreen display from LilyGO. It is easy to program, also like an Arduino. Note: The display is not yet taped to the rest of the module. Carefully remove the module from its packaging by pulling the clear tab. ..
€37.00
Ex Tax:€30.58
LilyGO T-RGB ESP32-S3 - with 2.8 inch IPS Display and Touchscreen
2-4 Weeks
Model: LILYGO-H604
A microcontroller with circular touchscreen display from LilyGO. It is easy to program, also like an Arduino. Note: The display is not yet glued to the rest of the module. Carefully remove the module from its packaging by pulling the clear tab. ..
€44.00
Ex Tax:€36.36
Model: LILYGO-H689
A development board based on an ESP32-S3 with various communication options and many available IO-pins...
€26.00
Ex Tax:€21.49
Model: LILYGO-Q170
The TTGO T-SIM7000G from LilyGO is a microcontroller based on an ESP32 with a built-in SIM7000G Module. It easy to program, even as an Arduino. The board has a USB-C connector with which it can be programmed and/or powered (USB-C cable not included)...
€55.00
Ex Tax:€45.45
Model: LILYGO-H606
The TTGO T-SIM7080G from LilyGO is a microcontroller based on an ESP32-S3 with a built-in SIM7080G Module. The board has a USB-C connection with which it can be programmed (USB-C cable not included). The module also has an integrated 18650 battery ho..
€35.00
Ex Tax:€28.93
LilyGO T-SIM7600E - ESP32-WROVER - with 18650 Battery Holder
Discontinued
Model: LILYGO-Q194
The TTGO T-SIM7600E from LilyGO is a microcontroller based on an ESP32 with a built-in SIM7600E Module. This means that the module has numerous wireless communication options such as GNSS (GPS), Wi-Fi, Bluetooth and LTE. The board has a USB-C connect..
€53.00
Ex Tax:€43.80
LilyGO T-SIM7600E-H - ESP32-WROVER - with 18650 Battery Holder
2-4 Weeks
Model: LILYGO-Q210
The TTGO T-SIM7600E-H from LilyGO is a microcontroller based on an ESP32 with a built-in SIM7600E-H Module. This means that the module has numerous wireless communication options such as GNSS (GPS), Wi-Fi, Bluetooth and LTE. The board has a USB-C con..
€73.00
Ex Tax:€60.33
Model: LILYGO-Q190
The TTGO T-SIM7600G-H R2 from LilyGO is a microcontroller based on an ESP32 with a built-in SIM7600G-H R2 Module. This means that the module has numerous wireless communication options such as GNSS (GPS), Wi-Fi, Bluetooth and LTE. The board has a USB..
€79.50
Ex Tax:€65.70
Model: LILYGO-H707
The LilyGO T-SIM7670G is a microcontroller based on an ESP32-S3 with a built-in SIM7670G module. This means the module has numerous wireless communication options such as GNSS (GPS), Wi-Fi, Bluetooth and LTE. The board has a USB-C connection with whi..
€44.75
Ex Tax:€36.98
Model: LILYGO-H574
LilyGO's TTGO T-SIMCAM is a microcontroller with camera. The board has a USB-C connector that allows it to be programmed and/or powered (USB-C cable not included). The board also has a handy PCIe slot for which various expansion modules are available..
€16.25
Ex Tax:€13.43
Model: LILYGO-H601
LilyGO's TTGO T-SIMCAM is a microcontroller with camera. The board has a USB-C connector that allows it to be programmed and/or powered (USB-C cable not included). The board also has a handy PCIe slot for which various expansion modules are available..
€25.25
Ex Tax:€20.87
Showing 151 to 200 of 513 (11 Pages)
1
false
true
true
Remove
Change
tr