2-4 Weeks
LilyGO T-RGB ESP32-S3 - with 2.8 inch IPS Display and Touchscreen
- Availability: 2-4 Weeks
- SKU: 005360
€44.00
Ex Tax: €36.36
A microcontroller with circular touchscreen display from LilyGO. It is easy to program, also like an Arduino.
Note: The display is not yet glued to the rest of the module. Carefully remove the module from its packaging by pulling the clear tab.
Note: Due to a built-in GPIO expander for the display driver, the screen will not work with standard examples for it. So take a good look at the examples in the link below to get the screen working.
See the following page for more information: GitHub
Reviews Over LilyGO T-RGB ESP32-S3 - with 2.8 inch IPS Display and Touchscreen
This product has 0 review(s) in total.
Report this review.
Tags:
Microcontroller Boards
, With Bluetooth
, LilyGO T-RGB ESP32-S3 - with 2.8 inch IPS Display and Touchscreen
, 005360
, LilyGO TTGO
, H604
, Battery charger
, Display
, Microcontroller (MCU)
, Programmable button(s)
, SD-card adapter
, Touchscreen
, ADC
, GPIO
, I2C
, I2S
, Native USB
, PWM
, UART
, USB CDC
, Bluetooth
, Wi-Fi
Specifications
| General | |
| Brand | LilyGO TTGO |
| Manufacturer model/SKU | H604 |
| Model revision | V1.2 |
| Features | Display Touchscreen Battery charger SD-card adapter Microcontroller (MCU) Programmable button(s) |
| General physical appearance | |
| Main color | Black |
| Weight [g] | 59 |
| Dimension X [mm] | 96 |
| Dimension Y [mm] | 96 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 40 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32-S3 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 2 |
| Internal memory | |
| SRAM [KB] | 512 |
| PSRAM [MB] | 8 |
| Flash memory [MB] | 16 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC I2C I2S PWM GPIO UART USB CDC Native USB |
| Number of IO-pins | 2 |
| Maximum available hardware PWM channels | 2 |
| Maximum available analog input pins (ADC) | 1 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 1 |
| Maximum available hardware I2C interfaces | 1 |
| Maximum available hardware SPI interfaces | 0 |
| USB to serial converter | Integrated into microcontroller |
| Supported SD card size | Micro SD |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32-S3 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32-S3 |
| Bluetooth version | 5.0 |
| Supported Bluetooth standard(s) | LE |
| Display | |
| Type | IPS |
| Driver | ST7701S |
| Screen diagonal [inch] | 2.8 |
| Number of pixels long side | 480 |
| Number of pixels short side | 480 |
| Display shape | Round |
| Pixel colors | RGB |
| Touchscreen | |
| Touchscreen controller | GT911 |
| Touch type | Capacitive |
| Multi-touch support | Yes |
| Battery circuit | |
| Battery charger chip/SoC | TP4065 |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 550 |
| Adjustable charging current | No |
| Protection circuit | No |
| Connectors | |
| Power supply connector(s) | USB-C female |
| IO-connector(s) | USB-C female HY2.0 (Grove) female |
| Battery connector(s) | Molex Picoblade (compatible) male |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna IPEX MHF 1/uFL male (requires modification) |
| Package contents | |
| Package contents | 1x T-RGB 1x Battery cable |