Menu
Your Cart

Microcontroller Boards - page 3

Model: ESP32-C6-DEVKITM-1
This development board from Espressif, with ESP-C6 microcontroller chip, which supports Zigbee and Thread as well as Wi-Fi and Bluetooth. The board has a USB-C connection with which it can be programmed and/or powered...
€12.50
Ex Tax:€10.33
Model: ESP32-S3-BOX-3
The ESP32-S3-BOX-3 is a very comprehensive microcontroller, with some accessories such as a docking station, mounting bracket and sensor module. Note: In the specifications, some values (such as number of pins and type of connectors) depend on whi..
€71.75
Ex Tax:€59.30
Espressif ESP32-S3-DevKitC-1-N32R16V - 32MB Flash - 16MB PSRAM
2-4 Weeks
Model: ESP32-S3-DEVKITC-1-N32R16V
Note: Not all broken out GPIO pins are actually connected to the ESP32-S3...
€22.25
Ex Tax:€18.39
Espressif ESP32-S3-DevKitC-1-N8R8 - 8MB Flash - 8MB PSRAM
2-4 Weeks
Model: ESP32-S3-DEVKITC-1-N8R8
..
€18.00
Ex Tax:€14.88
Espressif ESP32-S3-DevKitC-1U-N8R8 - 8MB Flash - 8MB PSRAM
New
Note: No antenna is included. ..
€20.00
Ex Tax:€16.53
Model: HTCC-AB02S-HF
The CubeCell is a compact, Arduino-compatible LoRaWAN development board with support for Li-ion/Li-Po powering and charging. This version has a built-in Air530Z GNSS (GPS) module. In addition, the board has an OLED display and you can directly connec..
€24.50
Ex Tax:€20.25
Model: HTCC-AB02
The CubeCell is a compact, Arduino-compatible LoRaWAN development board with support for Li-ion/Li-Po powering and charging. In addition, you can directly connect a solar panel for both powering the board and charging the Li-ion/Li-Po battery...
€18.75
Ex Tax:€15.50
Heltec CubeCell LoRa Development Board V2 - 868MHz
Discontinued
Model: HTCC-AB01_V2-868MHZ
The CubeCell is a compact, Arduino-compatible LoRaWAN development board with support for Li-ion/Li-Po powering and charging. In addition, you can directly connect a solar panel for both powering the board and charging the Li-ion/Li-Po battery...
€16.75
Ex Tax:€13.84
Model: HT-N5262-HF
The Mesh Node T114 is an energy-efficient development board based on the nRF52840 microcontroller and an SX1262 LoRa module...
€34.50
Ex Tax:€28.51
Model: HT-MESHPOCKETQI2
Note: Wireless charging reduces the LoRa range...
€75.50
Ex Tax:€62.40
Model: HT-SUFFICIENTIOHUB-HF
The Sufficient IoT Hub from Heltec is a development board with, among other things, LoRa connectivity that runs on a Linux distribution...
€36.00
Ex Tax:€29.75
Model: HT-VME213-HF
Heltec's Vision Master is a versatile development board based on the ESP32-S3. The microcontroller is compatible with Arduino, PlatformIO and MicroPython and supports Bluetooth, Wi-Fi and LoRa. This makes it ideal for developing electronic tags and o..
€22.00
Ex Tax:€18.18
Model: HT-VME290-HF
Heltec's Vision Master is a versatile development board based on the ESP32-S3. The microcontroller is compatible with Arduino, PlatformIO and MicroPython and supports Bluetooth, Wi-Fi and LoRa. This makes it ideal for developing electronic tags and o..
€23.50
Ex Tax:€19.42
Heltec Vision Master T190 - ESP32-S3 - SX1262 LoRa 868MHz - with 1.9 inch IPS Display
2-4 Weeks
Model: HT-VMT190-HF
This Heltec Vision Master T190 is a microcontroller based on an ESP32-S3 with a built-in IPS-TFT display and a LoRa module. The microcontroller is compatible with Arduino, PlatformIO and MicroPython and supports Bluetooth and Wi-Fi...
€21.00
Ex Tax:€17.36
Model: HT-VMT190
The Heltec Vision Master T190 is a microcontroller based on an ESP32-S3 with a built-in IPS-TFT display. The microcontroller is compatible with Arduino, PlatformIO and MicroPython and supports Bluetooth and Wi-Fi...
€19.50
Ex Tax:€16.12
Model: HTIT-WB32_V3
This Heltec microntroller board has an OLED screen and supports both Wi-Fi and Bluetooth. The board has a USB-C connector that allows it to be programmed and/or powered (USB cable not included). This board also supports Li-ion/Li-Po powering and char..
€14.00
Ex Tax:€11.57
Model: HTIT-WB32LAF_V3.1-433MHZ
This Heltec microntroller board has an OLED screen and supports both Wi-Fi, Bluetooth and LoRa (433MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po ..
€22.75
Ex Tax:€18.80
Heltec Wi-Fi LoRa 32 V3 - ESP32-S3 - SX1262 868MHz - with 0.96 inch OLED Display
2-4 Weeks
Model: HTIT-WB32LA_V3-868MHZ
This Heltec microntroller board has an OLED screen and supports both Wi-Fi, Bluetooth and LoRa (868MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po ..
€21.00
Ex Tax:€17.36
Model: ZC-327-1
Compared to the V3, this version features upgrades like solar charging and increased storage capacity. Note: Not all countries allow LoRa signals to be transmitted on 868MHz with a power of 28dBm (630mW, maximum of this module). In the Netherlands..
€21.00
Ex Tax:€17.36
Model: HT-WB32LA_V4-868MHZ
Compared to the V3, this version features upgrades like solar charging and increased storage capacity. Note: Not all countries allow LoRa signals to be transmitted on 868MHz with a power of 28dBm (630mW, maximum of this module). In the Netherlands..
€22.00
Ex Tax:€18.18
Model: HT-WIRELESSPAPER433
This E-Ink display from Heltec has an ESP32-S3 and can be connected via Bluetooth, Wi-Fi and LoRa...
€18.75
Ex Tax:€15.50
Heltec Wireless Paper 2.13 inch E-ink Display V1.1 - ESP32-S3 - SX1262 LoRa 868MHz
Discontinued
Model: HT-WIRELESSPAPER868
The Wireless Paper from Heltec is based on an ESP32-S3 microcontroller with an E-paper/E-ink screen. The USB to serial converter makes it easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and/or p..
€22.50
Ex Tax:€18.60
Model: HTIT-WSL-HF_V3
This Heltec microntroller board has many IO pins, and supports both Wi-Fi, Bluetooth and LoRa (868MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po p..
€19.50
Ex Tax:€16.12
Model: HTIT-WS-HF_V3
This Heltec microntroller board has many IO pins, and supports both Wi-Fi, Bluetooth and LoRa (868MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po p..
€21.50
Ex Tax:€17.77
Model: HT-WIRELESS-TRACKER-HF
A development board from Heltec based on ESP32-S3 which also goes by the name of HTIT-Tracker. This board supports Wi-Fi, Bluetooth, LoRa and GNSS. Furthermore, the board features a TFT display and Li-ion/Li-Po powering and charging. The board has a ..
€23.50
Ex Tax:€19.42
Model: ESP32-1732S019N
A microcontroller based on an ESP32-S3 with a built-in 1.9 inch IPS display. The USB to serial converter makes it easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable not ..
€12.00
Ex Tax:€9.92
Model: ESP32-2424S012C-I
A round 1.28 inch TFT display with touchscreen based on an ESP32-C3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE...
€15.50
Ex Tax:€12.81
Model: ESP32-2424S012C-I-Y(B)
A round 1.28 inch TFT display with touchscreen based on an ESP32-C3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE...
€17.00
Ex Tax:€14.05
Model: ESP32-2432S028R
A 2.8 inch TFT display with touchscreen based on an ESP32 microcontroller. It is easy to program via the Micro USB connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sep..
€12.50
Ex Tax:€10.33
Jingcai ESP32-2432S032C-I - 3.2 inch TFT-LCD Display 320*240 pixels with Capacitive Touchscreen - ESP32
2-4 Weeks
Model: ESP32-2432S032C-I
A 3.2 inch TFT display with touchscreen based on an ESP32 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered separat..
€17.25
Ex Tax:€14.26
Jingcai ESP32-2432S032R-I - 3.2 inch TFT-LCD Display 320*240 pixels with Resistive Touchscreen - ESP32
2-4 Weeks
Model: ESP32-2432S032R-I
A 3.2 inch TFT display with touchscreen based on an ESP32 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered separat..
€15.50
Ex Tax:€12.81
Jingcai ESP32-3248S035C - 3.5 inch TFT Display 320*480 pixels with Capacitive Touchscreen - ESP32
2-4 Weeks
Model: ESP32-3248S035C
A 3.5 inch TFT display with touchscreen based on an ESP32 microcontroller. It is easy to program via the micro-USB connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sep..
€19.00
Ex Tax:€15.70
Jingcai ESP32-3248S035R - 3.5 inch TFT Display 320*480 pixels with Resistive Touchscreen - ESP32
2-4 Weeks
Model: ESP32-3248S035R
A 3.5 inch TFT display with touchscreen based on an ESP32 microcontroller. It is easy to program via the micro-USB connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sep..
€16.75
Ex Tax:€13.84
Jingcai ESP32-4827S043C - 4.3 inch TFT-LCD Display 480*272 pixels with Capacitive Touchscreen - ESP32-S3
2-4 Weeks
Model: ESP32-4827S043C
A 4.3 inch TFT display with touchscreen based on an ESP32-S3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sepa..
€25.25
Ex Tax:€20.87
Model: ESP32-4827S043R
A 4.3 inch TFT display with touchscreen based on an ESP32-S3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sepa..
€21.50
Ex Tax:€17.77
Model: ESP32-8048S043C-I
A 4.3 inch TFT display with touchscreen based on an ESP32-S3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sepa..
€29.25
Ex Tax:€24.17
Jingcai ESP32-8048S050C-I - 5 inch IPS Display 800*480 pixels with Capacitive Touchscreen - ESP32-S3
2-4 Weeks
Model: ESP32-8048S050C-I
A 5 inch TFT display with touchscreen based on an ESP32-S3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered separa..
€36.50
Ex Tax:€30.17
Jingcai ESP32-8048S070C - 7 inch TFT-LCD Display 800*480 pixels with Touchscreen - ESP32-S3
Discontinued
Model: ESP32-8048S070C
A 7 inch TFT display with touchscreen based on an ESP32-S3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered separa..
€37.25
Ex Tax:€30.79
This V0.1 version is largely identical to the newer version; however, the audio chip is different. Otherwise, as far as we have been able to discover, it is the same...
€37.25
Ex Tax:€30.79
Model: KS0486
A development board from Keyestudio based on the ATMEGA328P chip with the form factor of an Arduino Uno. Unique to this board is that the IO voltage can be set to either 5V or 3.3V with the on-board switch...
€11.50
Ex Tax:€9.50
Model: ARDLEO
This Leonardo is based on the open source design of Arduino, making it both hardware and software compatible with the Arduino ecosystem. The Leonardo is often compared to the Uno R3, but it has another microcontroller, the ATmega32U4. This allows you..
€8.50
Ex Tax:€7.02
Model: LILYGO-Q309
The LilyGO LILY Pi is based on the ESP32 and has the form factor of a Raspberry Pi. This LILY Pi comes with a display with touchscreen and a built-in relay. It is easy to program via the Arduino IDE. Note: The USB ports are connected directly to t..
€40.50
Ex Tax:€33.47
Model: LILYGO-H501
This T-Display from LilyGO is a microcontroller based on an ESP32 with a built-in 1.02 inch E-paper E-ink display and an enclosure. Note: This board does not have a built-in USB to serial converter, to program the board the following converte..
€22.50
Ex Tax:€18.60
Model: LILYGO-H676
This T-Display from LilyGO is a microcontroller based on an ESP32-S3 with a built-in 1.02 inch E-paper E-ink display and an enclosure...
€21.50
Ex Tax:€17.77
Model: LILYGO-H534
The T01-C3 is a successor to the popular ESP-01 Wi-Fi module. This module is based on the ESP32-C3 microcontroller (instead of the ESP8266 like the ESP-01 module), as such this module also has Bluetooth low energy (BLE) in addition to Wi-Fi..
€5.50
Ex Tax:€4.55
Model: LILYGO-Q402
The T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in LoRa chip and a GNSS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be progra..
€41.00
Ex Tax:€33.88
Showing 101 to 150 of 513 (11 Pages)
1
false
true
true
Remove
Change
tr