Model: M5STACK-U110
Brand: M5Stack
With this M5Stack ZigBee unit it is possible to communicate with other ZigBee devices. This unit comes with a Grove cable which makes it easy to connect to other M5Stack products.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3V
..
€21.75
Ex Tax:€17.98
Model: NRF24L01+ZADAPTER
This adapter board provides a separate power supply and a slightly easier connection of the NRF24L01 + Wireless Module - Black.
The pins are described on this adapter board so that you can see in a glance which pins you should have...
€1.50
Ex Tax:€1.24
Model: NRF905MOD
The NRF905 module is a wireless transceiver with an included antenna (433MHz), suitable for applications in remote control, telemetry, industrial data acquisition, and wireless networking, operating on frequencies of 433MHz, 868MHz, and 915MHz...
€4.50
Ex Tax:€3.72
Model: OS-INFRAREDRECIEVER
An IR receiver module for easy capture of IR signals (works with most common remote controls). This module has 3 sensors for an extra wide range of about 270°...
€2.75
Ex Tax:€2.27
Model: OS-RF433KIT
An RF transmitter and receiver kit from Open-Smart...
€5.00
Ex Tax:€4.13
2-4 Weeks
Model: OP-AP6275P
Brand: Orange Pi
This module is ideal for adding Wi-Fi and Bluetooth functionality to your Orange Pi 5. You can easily connect this module via the M.2 port on the Orange Pi 5.
Note: This module is not suitable for the Orange Pi 5 Plus...
€22.75
Ex Tax:€18.80
Model: OPR6
Brand: Orange Pi
This module is ideal for adding Wi-Fi and Bluetooth functionality to your Orange Pi 5 Plus. You can easily connect this module via the M.2 port on the Orange Pi 5 Plus...
€16.00
Ex Tax:€13.22
On request
Model: PIS-1126
With the IoT LoRa Gateway HAT you provide a Raspberry Pi with a smart, long-range, wireless technology. It is very low in power consumption but only supports low data rates, making it a perfect solution for setting up sensors for weather or air quali..
€140.00
Ex Tax:€115.70
Discontinued
Model: PIS-1128
With the IoT LoRa Node pHAT you can provide a Raspberry Pi with smart, long-range, wireless technology. It is very low in power consumption but only supports low data rates, making it an ideal solution for setting up sensors such as weather or air qu..
€28.00
Ex Tax:€23.14
Model: PIS-1136
With this IoT LoRa Node Shield you can provide an Arduino with smart, long-range, wireless technology. It is very low in power consumption but only supports low data rates, making it a perfect solution for setting up sensors such as weather or air qu..
€28.00
Ex Tax:€23.14
Model: R1-433MHZRFRECEIVER
A small RF receiver with very low power consumption and yet a relatively high input voltage range. This allows it to be powered directly from a Li-Po/Li-ion battery, for example.
Specifications:
Supply voltage: 2.7 - 5.3V DC
Signal voltage..
€2.50
Ex Tax:€2.07
Model: R1L-433MHZRFRECEIVER
A small size RF receiver.
Specifications:
Supply voltage: 2.0 - 5.5V DC
Signal voltage: 2.0 - 5.5V
Nominal current: ~2.9mA
RF receiver:
Frequency: 433.92MHz
Sensitivity: -108dBm
Maximum transfer rate: 9.6kb/s
Modulation:..
€2.25
Ex Tax:€1.86
Model: R2-433MHZRFRECEIVER
An RF receiver with a very low power consumption.
Specifications:
Supply voltage: 2.2 - 3.6V DC
Signal voltage: 2.2 - 3.6V
Nominal current: ~0.1mA
RF receiver:
Frequency: 433.92MHz
Sensitivity: -102dBm
Maximum transfer rate..
€2.50
Ex Tax:€2.07
Model: R4A-433MHZRFRECEIVER
An RF receiver with an antenna on the PCB. To get the module out of sleep mode, the "SHUT" pin must be connected to ground.
Specifications:
Supply voltage: 2.0 - 5.5V DC
Signal voltage: 2.0 - 5.5V
Current:
Nominal: ~2.95mA
Sleep..
€2.50
Ex Tax:€2.07
Model: RA007-A8
This module is ideal for adding Wi-Fi and Bluetooth functionality to your Radxa board...
€12.00
Ex Tax:€9.92
Model: RAK-110016
The RAK12500 is a GNSS module from RAKwireless for the modular WisBlock platform. This module is based on the ZOE-M8Q chip...
€19.75
Ex Tax:€16.32
New
Model: RAK-110218
A GNSS location module from RAKwireless for the modular WisBlock system...
€12.25
Ex Tax:€10.12
Model: RAK-105006
The RAK13300 is a LoRa/LoRaWAN communication module from RAKwireless for the modular WisBlock platform, based on the SX1262...
€12.50
Ex Tax:€10.33
New
Model: RAK-205008
This LoRa tracker from RAKwireless initially looks like a simple sticker but has number of features such as a tracker function, built-in battery (not rechargeable), and temperature sensor. The RAK2270 comes with the Trackpack software through wh..
€26.00
Ex Tax:€21.49
Model: RAK-110000
A Wi-Fi communication module from RAKwireless for the modular WisBlock platform, based on the ESP32-WROVER. The module is pre-programmed with the Espressif AT command interface, but can also be reprogrammed...
€11.50
Ex Tax:€9.50
Model: RAK-305057
The RAK3172-T is a microcontroller module with built-in LoRa functionality based on the STM32WLE5CC chip...
€9.75
Ex Tax:€8.06
Model: RAK-311027
An energy-efficient LoRa module from RAKwireless. The module is based on a STM32WLE5 chip, which can also be reprogrammed...
€16.50
Ex Tax:€13.64
Model: RAK-315046
An energy-efficient LoRa module from RAKwireless. The module is based on a STM32WLE5 chip, which can also be reprogrammed...
€21.50
Ex Tax:€17.77
2-4 Weeks
Model: RDM6300
This RFID reader reads 125kHz RFID tags with the EM4100 protocol (such as the EM4100 Key Tag).
Specifications:
Input voltage: 5V
Input current: 50mA
Frequency: 125 kHz
Baud rate: 9600
EM4100 protocol compatible
Output: Serial..
€5.00
Ex Tax:€4.13
Model: RF-BM-2652P2
Note: The chip does not have extensive support (in the Arduino IDE, for example), only buy this product if you know how to work with it...
€11.50
Ex Tax:€9.50
Model: RDM6300MOD
With this RFID card reader you can read cards/tags for your project. The data can be read via UART. While sending the serial data, pin J1 is pulled up and thus gives an indication of a successful card/tag reading. At the same time, pin J2 is also act..
€4.50
Ex Tax:€3.72
Model: RC522
With this RFID kit you can read Mifare tags and cards for your project.
Specifications:
Supply voltage: 3.3V DC
Continuous Current: 13-26mA / DC 3.3V
Idle Current: 10-13mA / DC 3.3V
Sleep current draw: <80uA
Peak current: <30mA..
€7.00
Ex Tax:€5.79
Model: PN532MODKIT
This PN532 RFID module can also send data via NFC, in addition to sending and receiving Mifare tags.
The module can be controlled via SPI, I2C or UART.
Specifications:
Chip: NXP PN532
Voltage: 3.3 - 5V DC
Supports various RFID products ..
€6.00
Ex Tax:€4.96
Model: WRISTBAND-TK4100-BELT
A blue wristband with a belt buckle clasp that has a 125kHz TK4100 chip. The TK4100 is compatible with EM4100/EM4102/EM4200 chips and can be read with the RDM6300 RFID reader. The chip cannot be reprogrammed, it can only be read.
Specificatio..
€3.00
Ex Tax:€2.48
Model: WRISTBAND-TK4100-ELASTIC
A blue wristband with an elastic band that has a 125kHz TK4100 chip. The TK4100 is compatible with EM4100/EM4102/EM4200 chips and can be read with the RDM6300 RFID reader. The chip cannot be reprogrammed, it can only be read.
Specifications:
..
€3.00
Ex Tax:€2.48
Model: WRISTBAND-TK4100-SNAP
A blue wristband with a snap fastener that has a 125kHz TK4100 chip. The TK4100 is compatible with EM4100/EM4102/EM4200 chips and can be read with the RDM6300 RFID reader. The chip cannot be reprogrammed, it can only be read.
Specifications:
..
€3.00
Ex Tax:€2.48
Model: S50STICKER
An S50 Mifare tag sticker.
Specifications:
Diameter: 25 mm
Thickness: 0.1 mm
Frequency: 13.56 MHz
Distance: 1-10 cm..
€1.00
Ex Tax:€0.83
Model: SEEED-113020002
An RFID reader module from Seeed Studio suitable for reading EM4100 compatible RFID cards/tags.
Specifications:
Supply voltage: 4.75 - 5.25V DC
Signal voltage: 4.75 - 5.25V (same as supply voltage)
Communication:
Interface: UART
..
€15.50
Ex Tax:€12.81
Model: SEEED-109020022
A GNSS module from Seeed Studio...
€12.00
Ex Tax:€9.92
Model: SEEED-113020091
A LoRa module from Seeed Studio, based on the LoRa-E5 chip. The module has a built-in antenna and is easy to control via UART.
Specifications:
Supply voltage: 3.3 - 5V DC
Signal voltage: 3.3V (5V tolerant)
Communication:
Interface:..
€23.50
Ex Tax:€19.42
On request
Model: SEEED-114992751
The SenseCAP M2 Light Hotspot from Seeed is a LoRaWAN gateway that connects to the Helium LongFi network (unlimited software license is included). By connecting the device you can earn Helium coins (HNT) when other LoRaWAN devices send data via your ..
€114.25
Ex Tax:€94.42
On request
Model: SEEED-114992872
This SenseCAP data logging module from Seeed Studio can read sensors (1x RS485 or 2x analog current or 2x analog voltage or 1x GPIO) and send this data wirelessly over great distances with LoRaWAN. Due to the IP66 dust-proof and water-proof housing, ..
€80.00
Ex Tax:€66.12
Model: SIM7600E-L1CMOD
A telecom module based on the SIM7600E-L1C. The module is controlled via AT commands.
Note: The module does not include a telecom and/or GNSS antenna. These can be ordered separately: Antennas..
€33.50
Ex Tax:€27.69
2-4 Weeks
Model: WS-19543
This SIM7600G-H Module from SIMCom is a powerful 4G LTE Cat-4 module with global coverage and GNSS support. Featuring a mini-PCIe connector, this module is easy to integrate into IoT applications such as security devices, industrial routers, and remo..
€76.00
Ex Tax:€62.81
Model: IRREMOTE
A small remote control that can be used in combination with the HX1838 infrared receiver.
More information: Tutorial
Note: No battery (CR2025 or CR2032) is supplied with this remote control...
€1.00
Ex Tax:€0.83
Model: SONOFF-RFREMOTE
With the Sonoff 433MHz RF Remote Control you can easily switch other Sonoff products that have a built-in RF receiver.
Specifications:
RF frequency: 433MHz
Number of buttons: 4
Also works with other home automation systems via eg RFXCOM ..
€3.50
Ex Tax:€2.89
Model: SONOFF-RM433R2
The Sonoff RM433R2 is an RF remote control with which you can easily operate other Sonoff products. The remote has additional functions when used with a Sonoff IFan03 Wi-Fi Fan & Light Controller and Sonoff D1 Wi-Fi Smart Dimmer.
The differenc..
€8.00
Ex Tax:€6.61
Model: SONOFF-ZBDONGLE-E
A Zigbee dongle from Sonoff that can be used, for example, as a Zigbee router for Home Assistant. Besides Zigbee, the dongle also supports other protocols, including Thread, if other software is installed on it using the following tool: Sonoff Dongle..
€20.50
Ex Tax:€16.94
Model: T1-433MHZRFTRANSMITTER
A small RF transmitter.
Specifications:
Supply voltage: 2 - 12V DC
Signal voltage: 2 - 12V DC
Nominal current: ~18mA
RF transmitter:
Frequency: 433.92MHz
Transmit power: 15dBm/31.6mW (at 3V)
Maximum transfer rate: 4.8kB/s
..
€2.25
Ex Tax:€1.86
Model: TAO-FXP611.07.0092C
An antenna from Taoglas that is suitable for GNSS signals...
€8.00
Ex Tax:€6.61
2-4 Weeks
Model: TAO-FXUB63.07.0150C
An antenna from Taoglas with high quality and a very wide frequency range...
€8.50
Ex Tax:€7.02
Model: TEA5767
A module to listen FM radio.
See the following page for more information: TEA5767 FM Radio Breakout Board for Arduino
Note: The module is quite small, in the tutorial is shown how to solder it. A soldering iron with a small tip (for SMD) is hig..
€2.50
Ex Tax:€2.07
Model: CALYX-4G
This European made Calyx 4G is a HAT by Teltonika for Raspberry Pi to use various generations of telecommunications. This module supports calling, SMS, and data transfer.
Note: Antennas are not included, we recommend the following antenna (2 piece..
€49.50
Ex Tax:€40.91