New
Model: HTCC-AB01_V2-868MHZ
The CubeCell is a compact, Arduino-compatible LoRaWAN development board with support for Li-ion/Li-Po powering and charging. In addition, you can directly connect a solar panel for both powering the board and charging the Li-ion/Li-Po battery...
€17.50
Ex Tax:€14.46
Model: HTIT-WB32LA_V3-868MHZ
This Heltec microntroller board has an OLED screen and supports both Wi-Fi, Bluetooth and LoRa (868MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po ..
€20.00
Ex Tax:€16.53
Model: HTIT-WSL-HF_V3
This Heltec microntroller board has many IO pins, and supports both Wi-Fi, Bluetooth and LoRa (868MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po p..
€19.50
Ex Tax:€16.12
Model: LILYGO-H496
..
€34.00
Ex Tax:€28.10
Model: LILYGO-H595
A LoRa development board of LilyGO including a 0.96 inch OLED display...
€21.75
Ex Tax:€17.98
On request
Model: LILYGO-G612-Q175
The LilyGO TTGO LoRa32 is an ESP32 based microcontroller board with a built-in SX1276 LoRa chip and a 0.96 inch OLED display. The board is easily programmable through the USB to serial convertor and can also be used as an Arduino. The board has a mic..
€18.50
Ex Tax:€15.29
Discontinued
Model: LILYGO-H267-Q217
The TTGO T-Beam from LilyGO is a microcontroller based on an ESP32, including a built-in LoRa chip and a GPS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be p..
€39.50
Ex Tax:€32.64
Model: LILYGO-H242-Q159
The TTGO T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in SX1276 LoRa chip and a NEO-6M GPS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with whic..
€34.25
Ex Tax:€28.31
Model: LILYGO-H261-Q106
The TTGO T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in SX1276 LoRa chip and a NEO-M8N GPS module. The CP2104 USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection w..
€40.50
Ex Tax:€33.47
Model: LILYGO-K183
The LilyGO T-Echo is a microcontroller based on an nRF52840. The T-Echo includes a LoRa chip, GNSS module, E-Paper display and battery. The module has a USB-C connector with which it can be programmed (e.g. via the Arduino IDE) and/or powered (USB-C ..
€72.00
Ex Tax:€59.50
Model: LILYGO-K151
A wristband based on an S76G System in Chip (SiP) that integrates a number of chips into one, including a microcontroller, LoRa chip and GNSS (GPS) chip.
Note: The same wristband is used as for the TTGO T-Wristband modules, however, this product i..
€49.00
Ex Tax:€40.50
Model: LILYGO-H522
The TTGO T-Weigh is a microcontroller based on an ESP32 with HX711 load cell amplifiers to which four load cells can be connected. This module also has the option to communicate via LoRa.
Note: This board does not have a built-in USB to serial con..
€24.00
Ex Tax:€19.83
Model: LILYGO-Q134
The TTGO LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in LoRa chip and an OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be prog..
€18.75
Ex Tax:€15.50
Model: LILYGO-H240-01-Q213
The TTGO T3 LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in SX1276 LoRa chip and a 0.96 inch OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with w..
€21.50
Ex Tax:€17.77
Model: WS-20682
Brand: Waveshare
A Waveshare LoRa module with a back-up battery.
Note: No Raspberry Pi Pico is included.
Note: The imprint may be wrong, it may indicate that it is the 433MHz version, however it is in fact the 868MHz version...
€15.00
Ex Tax:€12.40
Showing 1 to 15 of 15 (1 Pages)