Model: 433MAFSTAND
You can easily control an input with the remote control and the receiver. The remote control has 4 buttons that can control 4 outputs on the receiver. The 12V battery for the transmitter is included. This is already in the remote control. A red LED i..
€5.00
Ex Tax:€4.13
Model: 433MKIT
Receiver module specifications:
Voltage: 5V (DC)
Static current: 4mA
Receiver Frequency: 433MHz
Receiver sensitivity: -105dB
External antenna: 32cm single-core wire, wound into a spiral
Dimensions (L x W): 30 x 14mm
Transmitter m..
€2.50
Ex Tax:€2.07
Model: NRF24L01+Z
A very easy to use wireless communication module that uses the 2.4GHz frequency.
Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, particularly suitable for industrial control applications.
125 Chann..
€2.50
Ex Tax:€2.07
Model: NRF24L01+PA-LNA
An easy wireless communication module that uses the 2.4 GHz band.
This variant of the NRF24L01+ module also has a PA (Power amplifier) ​​and LNA (Low noise amplifier) ​​built in for a wider range.
Maximum speed to 2Mbps, GFSK m..
€5.00
Ex Tax:€4.13
Model: AC-RX2/CS
This receiver is a lot more sensitive than the receiver from the standard 433Mhz kit that we also offer.
This way you can receive better signals from other 433Mhz transmitters.
Specifications:
Voltage: 4.5 - 5.5V DC
Power (in..
€6.50
Ex Tax:€5.37
Model: RX-4MM5/F
This receiver is a lot more sensitive than the receiver from the standard 433Mhz kit that we also offer.
This way you can receive better signals from other 433Mhz transmitters.
Specifications:
Voltage: 4.5 - 5.5V DC
Current (..
€8.00
Ex Tax:€6.61
Discontinued
Model: CC2500RFMOD
An easy wireless RF communication module with the TI CC2500 chip that can use the various bands. The module works through SPI communication.
Specifications:
Voltage: 1.8 - 3.6V DC
Effective frequency range: 2400 - 2483.5MHz
Current (max)..
€6.50
Ex Tax:€5.37
Model: CC2500RFMOD-PCB
An easy wireless RF communication module with the TI CC2500 chip that can use the various bands. The module works through SPI communication. This RF board has a low power consumption, so it will be able to work on a power supply for a long time ..
€5.50
Ex Tax:€4.55
Model: GT-24-WLMOD-MINI
A wireless RF transceiver module that uses the 2.4GHz band and has a range of up to 1000 meters. This module is comparable to the NRF24L01+ module that we already sell, but the GT-24 has an additional power amplifier (PA) and low noise amplifier (LNA..
€4.00
Ex Tax:€3.31
-200x200w.jpg "GT-24 Wireless Module - NRF24L01+ with PA and LNA")
Model: GT-24-WLMOD
A wireless RF transceiver module that uses the 2.4GHz band and has a range of up to 1000 meters. This module is comparable to the NRF24L01+ module that we already sell, but the GT-24 has an additional power amplifier (PA) and low noise amplifier (LNA..
€4.00
Ex Tax:€3.31
Model: GT-24-WLMOD-SHEADERS
A wireless RF transceiver module that uses the 2.4GHz band and has a range of up to 1000 meters. This module is comparable to the NRF24L01+ module that we already sell, but the GT-24 has an additional power amplifier (PA) and low noise amplifier (LNA..
€4.00
Ex Tax:€3.31
Model: HC-12-SI4438
With the HC-12 module you can send data between two devices at a great distance. The module is equipped with an SI4438 Transceiver IC in combination with a STM8 microcontroller. Communication via an Arduino is very easy via UART (RX and TX) signals.
..
€5.50
Ex Tax:€4.55
Model: RFM210LCF-433D
This receiver is a lot more sensitive than the receiver from the standard 433Mhz kit that we also offer.
This way you can receive better signals from other 433Mhz transmitters.
Specifications:
Voltage: 1.8 - 3.6V DC
Power (in..
€3.00
Ex Tax:€2.48
Model: RFM210LCF-433D-A
This receiver is a lot more sensitive than the receiver from the standard 433Mhz kit that we also offer.
This way you can receive better signals from other 433Mhz transmitters.
Specifications:
Voltage: 4.5 - 5.5V DC
Power (in..
€3.00
Ex Tax:€2.48
Model: RFM69HW-433S2
Specifications:
Voltage: 1.8 - 3.6V DC
Receiver Frequency: 433 Mhz
Receiver sensitivity: -120dBm (1200 bps)
Transmitter power: 20dBm
Suitable for FSK, GFSK, MSK, GMSK, ALS modulations. (FSK bitrate up to 300 kb/s)
Built-i..
€4.75
Ex Tax:€3.93
Model: RFM69HW-868S2
Specifications:
Voltage: 1.8 - 3.6V DC
Receiver Frequency: 868 Mhz
Receiver sensitivity: -120dBm (1200 bps)
Transmitter power: 20dBm
Suitable for FSK, GFSK, MSK, GMSK, ALS modulations. (FSK bitrate up to 300 kb/s)
Built-i..
€5.00
Ex Tax:€4.13
Model: RFM69W-433S2
Specifications:
Voltage: 1.8 - 3.6V DC
Receiver Frequency: 433 Mhz
Receiver sensitivity: -120dBm (1200 bps)
Transmitter power: 13dBm
Suitable for FSK, GFSK, MSK, GMSK, ALS modulations. (FSK bitrate up to 300 kb/s)
Built-i..
€5.50
Ex Tax:€4.55
Model: RFM69W-868S2
Specifications:
Voltage: 1.8 - 3.6V DC
Receiver Frequency: 868 Mhz
Receiver sensitivity: -120dBm (1200 bps)
Transmitter power: 13dBm
Suitable for FSK, GFSK, MSK, GMSK, ALS modulations. (FSK bitrate up to 300 kb/s)
Built-i..
€4.50
Ex Tax:€3.72
2-4 Weeks
Model: RFM85W-433D
This transmitter has a transmission power up to 16dBm and is relatively compact.
In addition, the module is suitable for both 3.3V and 5V systems.
Specifications:
Voltage: 2.1 - 5.5V DC
Current (in use): 40mA (5V), 24mA (3.3V..
€2.50
Ex Tax:€2.07
Model: LR43B-433MHZRFRECEIVER
A small RF receiver with a relative high sensitivity.
Specifications:
Supply voltage: 2.0 - 5.5V DC
Signal voltage: 2.0 - 5.5V
Nominal current: ~3.6mA
RF receiver:
Frequency: 433.92MHz
Sensitivity: -113dBm
Maximum transfer ..
€2.50
Ex Tax:€2.07
Model: NRF24L01+ZADAPTER
This adapter board provides a separate power supply and a slightly easier connection of the NRF24L01 + Wireless Module - Black.
The pins are described on this adapter board so that you can see in a glance which pins you should have...
€1.50
Ex Tax:€1.24
Model: R1-433MHZRFRECEIVER
A small RF receiver with very low power consumption and yet a relatively high input voltage range. This allows it to be powered directly from a Li-Po/Li-ion battery, for example.
Specifications:
Supply voltage: 2.7 - 5.3V DC
Signal voltage..
€2.50
Ex Tax:€2.07
Model: R1L-433MHZRFRECEIVER
A small size RF receiver.
Specifications:
Supply voltage: 2.0 - 5.5V DC
Signal voltage: 2.0 - 5.5V
Nominal current: ~2.9mA
RF receiver:
Frequency: 433.92MHz
Sensitivity: -108dBm
Maximum transfer rate: 9.6kb/s
Modulation:..
€2.25
Ex Tax:€1.86
Model: R2-433MHZRFRECEIVER
An RF receiver with a very low power consumption.
Specifications:
Supply voltage: 2.2 - 3.6V DC
Signal voltage: 2.2 - 3.6V
Nominal current: ~0.1mA
RF receiver:
Frequency: 433.92MHz
Sensitivity: -102dBm
Maximum transfer rate..
€2.50
Ex Tax:€2.07
Model: R4A-433MHZRFRECEIVER
An RF receiver with an antenna on the PCB. To get the module out of sleep mode, the "SHUT" pin must be connected to ground.
Specifications:
Supply voltage: 2.0 - 5.5V DC
Signal voltage: 2.0 - 5.5V
Current:
Nominal: ~2.95mA
Sleep..
€2.50
Ex Tax:€2.07
Model: RXB6
This receiver is a lot more sensitive than the receiver from the standard 433Mhz kit that we also offer.
This way you can receive better signals from other 433Mhz transmitters.
Specifications:
Voltage: 3.3 - 5V DC
Power (in u..
€2.50
Ex Tax:€2.07
Model: SONOFFRFREMOTE
With the Sonoff 433MHz RF Remote Control you can easily switch other Sonoff products that have a built-in RF receiver.
Specifications:
RF frequency: 433MHz
Number of buttons: 4
Also works with other home automation systems via eg RFXCOM ..
€3.50
Ex Tax:€2.89
Model: SONOFFRM433R2
The Sonoff RM433R2 is an RF remote control with which you can easily operate other Sonoff products. The remote has additional functions when used with a Sonoff IFan03 Wi-Fi Fan & Light Controller and Sonoff D1 Wi-Fi Smart Dimmer.
The differenc..
€7.00
Ex Tax:€5.79
Model: T1-433MHZRFTRANSMITTER
A small RF transmitter.
Specifications:
Supply voltage: 2 - 12V DC
Signal voltage: 2 - 12V DC
Nominal current: ~18mA
RF transmitter:
Frequency: 433.92MHz
Transmit power: 15dBm/31.6mW (at 3V)
Maximum transfer rate: 4.8kB/s
..
€2.25
Ex Tax:€1.86
Model: TEA5767
A module to listen FM radio.
See the following page for more information: TEA5767 FM Radio Breakout Board for Arduino
Note: The module is quite small, in the tutorial is shown how to solder it. A soldering iron with a small tip (for SMD) is hig..
€2.50
Ex Tax:€2.07
Showing 1 to 34 of 34 (1 Pages)