Menu
Your Cart

Power - page 2

Model: 9V-T-HARD
A 9V battery clip with loose wires...
€0.50
Ex Tax:€0.41
Model: 9VDC
A 9V battery clip with a DC jack...
€0.75
Ex Tax:€0.62
9V Battery Clip with Loose Wires - 15cm - HARD
2-4 Weeks
Model: 9VHARD
A 9V battery clip with loose wires...
€0.50
Ex Tax:€0.41
Model: 9V-T-SOFT
A 9V battery clip with loose wires...
€0.50
Ex Tax:€0.41
Model: 9VSOFT
A 9V battery clip with loose wires...
€0.50
Ex Tax:€0.41
Model: 9VDCHOL
A 9V battery holder with a DC jack. Note: This product may be supplied with a black cable...
€1.50
Ex Tax:€1.24
Model: 9VLEADSHOL
A 9V battery holder with a DC jack...
€1.25
Ex Tax:€1.03
Model: AMS1117-3.3VBREAKOUT
This module is suitable for making an extra 3.3V supply of eg a 5V power supply. Specifications: Voltage range: 4.5-7VDC Maximum current: 800mA LED indicates by way of indication whether the module is powered. Dimensions: 25x11mm ..
€0.80
Ex Tax:€0.66
Model: AMS1117-3.3VCOMPACT
This model can be used to create an extra 3.3V power supply from a 5V supply.   Specifications: Input voltage range: 4.5-7VDC Maximum current: 800 mA LED indicates if the module is powered The pin names on the board indica..
€0.75
Ex Tax:€0.62
Model: AMS1117-3.3VBRKOUT-HEAD
This module is suitable for making an extra 3.3V power supply from, for example, a 5V power supply. Specifications: Voltage range: 4.5-7VDC Maximum current: 800mA LED indicates if the module is powered. Dimensions: 25x11mm The pin..
€0.75
Ex Tax:€0.62
Model: TPX00242
The Arduino USB-C Power Supply is a compact PD charger with interchangeable regional plugs for safely charging Arduino boards, laptops, tablets and smartphones worldwide...
€17.75
Ex Tax:€14.67
Model: N18650CL-29
These Li-ion 18650 cells can be used in various applications. Note: This battery is "bare" and does not contain protection against too high currents, deep discharge or too high a charging voltage. Purchase this battery only if you understand the p..
€3.25
Ex Tax:€2.69
Model: BC-114992766
This is the standard Li-Po battery for the Crazyflie 2.1 DIY drone is used. Of course, this battery can also be used for other purposes. Note: Before connecting, always check that the polarity of the battery plug matches the polarity of the connec..
€11.00
Ex Tax:€9.09
Bitcraze Li-Po Battery 3.7V 350mAh for Crazyflie 2.X
2-4 Weeks
Model: BC-114993131
This is a larger Li-Po battery than the standard one used for the Crazyflie 2.X DIY drone. Of course, it can also be used for other projects...
€13.50
Ex Tax:€11.16
Model: BREADPOWER
A power supply for your breadboard. The module has two power lines which are both adjustable in 3.3V or 5V. The module also has a USB connection (always 5V), an On/Off button, and an LED that indicates whether the power is on...
€2.50
Ex Tax:€2.07
Model: BREADPOWERWHITE
Power supply for your breadboard. Compatible with the Breadboard 400 and Breadboard 830. Both power lines can be easily set for 0V, 5V or 3.3V. Very easy if you have a module that needs 3.3V. A Mini USB input with a self-healing fuse, and a DC ..
€2.50
Ex Tax:€2.07
Model: CAMELION-CR1220
A standard CR1220 battery...
€1.30
Ex Tax:€1.07
Model: CAMELION-CR2477
A CR2477 battery...
€1.90
Ex Tax:€1.57
Model: SOLARCHARGERV1
This solar charger is based on the CN3065 chipset. With this module it is possible to connect a solar panel and a Li-ion or Li-Po battery to your project. The solar panel can charge the battery and power the system. A micro USB cable can also be conn..
€3.50
Ex Tax:€2.89
Model: ATXPWRADAPTER
An adapter board which you can connect to a 24-pin ATX computer power supply. Specifications: 24-pin ATX connection Built-in switch (power on/off) -12V, +12V, +5V and +3.3V screw clamp terminal connections Built-in 5A fuses (Note: The ..
€5.00
Ex Tax:€4.13
Model: 2032PCBHOL
A battery holder for a button cell, suitable for a PCB...
€0.50
Ex Tax:€0.41
Model: 2032PCBHOLFLAT
A battery holder for a button cell, suitable for a PCB...
€0.50
Ex Tax:€0.41
Model: 2450PCBHOLFLAT
A battery holder for a button cell, suitable for a PCB...
€0.60
Ex Tax:€0.50
DALY BMS Li-ion-Li-Po Protection Circuit - 10S 15A - with Balancing
Discontinued
Model: DALYBMS10S15A
A Battery Management System (BMS) for a battery pack. With this circuit you can safely make a battery pack of 10 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage. In add..
€11.50
Ex Tax:€9.50
Model: DALYBMS13S15A
A Battery Management System (BMS) for a battery pack. With this circuit you can safely make a battery pack of 13 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage. In add..
€12.00
Ex Tax:€9.92
Model: DALYBMS3S15A
A Battery Management System (BMS) for a battery pack. With this circuit you can safely make a battery pack of 3 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage. In addi..
€7.50
Ex Tax:€6.20
Model: DALYBMS4S15A
A Battery Management System (BMS) for a battery pack. With this circuit you can safely make a battery pack of 4 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage. In addi..
€8.00
Ex Tax:€6.61
Model: DALYBMS6S15A
A Battery Management System (BMS) for a battery pack. With this circuit you can safely make a battery pack of 6 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage. In addi..
€9.50
Ex Tax:€7.85
DALY BMS LiFePO4 Protection Circuit - 4S 15A - with Balancing
On request
Model: DALYBMS4S15A-LIFEPO4
A Battery Management System (BMS) for a battery pack. With this circuit you can safely make a battery pack of 4 series LiFePO4 batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage. In addition,..
€8.00
Ex Tax:€6.61
DALY BMS LiFePO4 Protection Circuit - 8S 15A - with Balancing
Discontinued
Model: DALYBMS8S15A-LIFEPO4
A Battery Management System (BMS) for a battery pack. With this circuit you can safely make a battery pack of 8 series LiFePO4 batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage. In addition,..
€11.50
Ex Tax:€9.50
Model: DFROBOT-DFR1015 Brand: DFRobot
A step-down converter where the output voltage can be changed by shorting a solder connection, the converter is set to 5V by default. To set a different voltage, the 5V connection (see photos) must first be removed before connecting the soldering pad..
€7.00
Ex Tax:€5.79
Model: LM2596
A step-down converter can be used to easily lower the voltage in an efficient way. Note: The potentiometer has several turns. So it may take a while before you have the desired voltage set correctly. You can rotate the potentiometer around 25x fro..
€3.00
Ex Tax:€2.48
Model: XL4015SEGMENT
A step-down converter with a handy built-in voltmeter for both the input voltage and the output voltage. Working voltage meter: Left button (on "IN" side): Turning the voltmeter on and off Right button (on "OUT" side): Perform voltage meas..
€7.00
Ex Tax:€5.79
Model: XL4015CC
An adjustable step-down (buck) converter which can be used to lower the voltage of another voltage source. In addition, this module also has an adjustable current limiter. Indication LEDs: Red: Constant output current (current limiter enable..
€4.50
Ex Tax:€3.72
Model: DFROBOT-DFR0952 Brand: DFRobot
A step-up converter where the output voltage can be changed by adjusting solder joints, the converter is set to 12V by default. To set a lower voltage, 0Ω resistors can be removed...
€8.50
Ex Tax:€7.02
Model: MT3608
A step-up converter, always useful for a hobby project!..
€2.00
Ex Tax:€1.65
Model: ADJDCDC-SX1308-2A
An adjustable step-up boost converter, always useful for a hobby project! Specifications: Input voltage: 2-24V DC* Output voltage: 2-28V DC Output current: 2A (max), 1A (recommended), <100mA (input <4.0V), <50mA (input <3.5V)..
€2.00
Ex Tax:€1.65
Model: XL6009
A step-up converter can be used to easily increase the voltage in an efficient way. Specifications: Module type: Non-isolated step-up (Boost) Rectification: Non-synchronous rectification Input voltage: 5V-32V Output voltage: 5V-35V I..
€3.50
Ex Tax:€2.89
Model: XL6009UPDOWN
You can set a voltage on this DC-DC converter and the converter itself will determine whether it should reduce or increase the voltage. Specifications: Module type: Non-insulated step-up/down (Buck/Boost) Rectification: Non-synchronous rec..
€4.00
Ex Tax:€3.31
Model: DFROBOT-DFR0753 Brand: DFRobot
A small but powerful DC-DC buck converter. This step-down converter has a fixed 5V output...
€10.00
Ex Tax:€8.26
Model: DFROBOT-DFR0831 Brand: DFRobot
..
€6.00
Ex Tax:€4.96
Model: DFROBOT-DFR0758
A handy DC-DC buck converter that supports fast charging with handy connections such as a DC jack and USB-C connection...
€8.00
Ex Tax:€6.61
Model: DCDCSTEPDOWN3.3V
A step-down converter, always handy for a hobby project! Specifications: Input voltage: 5.3V-26V Output voltage: 3.3V Output current: 1.5A (continuous), 3A (short-term) Conversion efficiency: 96% (highest at 2V difference between inpu..
€3.00
Ex Tax:€2.48
Model: DCDCSTEPDOWN5V
A step-down converter, always handy for a hobby project! Specifications: Input voltage: 7 - 26V DC Output voltage: 5V DC Output current: 1.5A (continuous), 3A (short-term)   Conversion efficiency: 96% (highest at 2V difference bet..
€3.00
Ex Tax:€2.48
Model: MINI560-PRO-9V
A small step-down buck converter...
€3.00
Ex Tax:€2.48
Model: DCDCSTEPDOWN4A12V
A step-down converter, always handy for a hobby project!..
€3.00
Ex Tax:€2.48
Showing 51 to 100 of 365 (8 Pages)
1
false
true
true
Remove
Change
tr