Model: SEEED-106990290
The Seeed Studio Lipo Rider Plus is a module that charges a Li-Po/Li-ion battery via USB-C. The module has a 5V 2.4A USB-A output. Furthermore, the module has 4 LEDs as a battery indicator and it is possible to mount pin headers. Via the pin headers ..
€7.00
Ex Tax:€5.79
Model: SEEED-106990020
With this shield for the Seeeduino/Arduino Uno you provide the microcontroller with a Li-Po/Li-ion battery connection and a connection for a solar panel . Furthermore, this shield makes it possible to charge the battery via micro-USB or the..
€17.50
Ex Tax:€14.46
Model: SEEED-313070004
This solar panel can be used to power your project with solar power.
Specifications:
Typical voltage: 5.5V
Typical current: 100mA
Open-circuit voltage: 8.2 V
Maximum load voltage: 6.4V
Dimensions: 70x55x3(±0.2) mm
Comes with ~15cm ..
€6.00
Ex Tax:€4.96
Model: SEEED-313070005
This solar panel can be used to power your project with solar power.
Specifications:
Typical voltage: 5.5V
Typical current: 170mA
Open-circuit voltage: 8.2 V
Maximum load voltage: 6.4V
Dimensions: 100x80x3(±0.2) mm
Comes with ~15cm..
€6.50
Ex Tax:€5.37
Model: SEEED-103990564
The Wio Terminal Battery Chassis is an extension for the Wio Terminal from Seeed Studio. The chassis can be easily placed on a Wio Terminal to create a wireless terminal. Moreover, the chassis extends the module with 4 extra Grove digital/analog port..
€26.00
Ex Tax:€21.49
The B6neo is a balance charger/discharger used for easily charging different types of batteries. It can be powered via the XT60 connector with DC voltage or with USB PD. For USB PD input, you can find suitable adapters on the following page: USB PD..
€35.00
Ex Tax:€28.93
Model: SOLARPANEL18V560MA
This solar panel can be used to run your device on solar energy. With this 10W solar panel you can get quite some energy.
Specifications:
Output voltage(max): ~22V (varies by current and depending on the intensity of the sun)
Output voltag..
€19.25
Ex Tax:€15.91
Model: SOLARPANEL5V200MA
This solar panel can be used to connect 5V devices.
Specifications:
Nominal output voltage: ~5V* (may be higher at low load)
Maximum output current (short circuit): ~200mA*
Is splash-proof except for the electrical contacts on the back
..
€3.50
Ex Tax:€2.89
Model: SOLARPANEL5V60MA
This solar panel can be used for connecting 5V devices.
Specifications:
Output voltage (max): ~5V (varies by the current and depending on the intensity of the sun)
Current (max): ~60mA
Dimensions: 68 x 37 x 2mm
Is splashproof except fo..
€2.50
Ex Tax:€2.07
Model: WS-16158
Brand: Waveshare
This solar panel can be used to run your device on solar energy. The panel comes with a 3.5mm DC Jack making it ideal for use with the following solar energy module: Waveshare Solar Power Management Module
Note: The voltage from this solar panel i..
€17.00
Ex Tax:€14.05
Model: SOLARPANEL5V1ADCDC
This somewhat flexible solar panel is ideal for connecting a USB device. That can be an Arduino, power bank, mobile device etc.
The panel also has four large holes for mounting, eg to fasten on a backpack or screw.
Specifications:
Output vo..
€11.50
Ex Tax:€9.50
Model: SONOFF-SOLARPANEL
This solar panel is made for the Sonoff ZBCurtain. The double-sided tape makes it easy to stick the panel to the window and as such provides the ZBCurtain with extra energy so that the batteries need to be charged less often.
Note: The voltage fro..
€13.75
Ex Tax:€11.36
Model: XSC-0502000SEU
A standard power adapter to power your project...
€6.50
Ex Tax:€5.37
Model: XSC-1201000SEU
A standard power adapter to power your project...
€7.50
Ex Tax:€6.20
Model: XSE-1202000NEU
A standard power adapter to power your project...
€9.00
Ex Tax:€7.44
Model: XSG-1203000HEU
A standard power adapter to power your project...
€11.50
Ex Tax:€9.50
Model: XSI-1205000HEU
A standard power adapter to power your project...
€14.50
Ex Tax:€11.98
Model: XSM-2405000W14
A standard power adapter to power your project.
Note: No power cable is included, this can be ordered separately: IEC C13 cable..
€21.00
Ex Tax:€17.36
Model: XSG-0504000HEU
A standard power adapter to power your project...
€10.50
Ex Tax:€8.68
Model: XSC-0502000SEUU
A standard power adapter to power your project...
€5.50
Ex Tax:€4.55
Model: XS-GAN-27W
This compacte USB PD charger can be used for various applications...
€11.25
Ex Tax:€9.30
Model: XSC-0502000SEU
A standard power adapter to power your project...
€6.50
Ex Tax:€5.37
Model: XSG-0504000HEU
A standard power adapter to power your project...
€10.50
Ex Tax:€8.68
Model: X1010
This PCIe FFC to PCIe x4 slot adapter board from SupTronics can be used to, for example, connect an SSD or GPU to the Raspberry Pi 5. The board also functions as power supply for the Raspberry Pi and PCIe device.
Note: Do not power the module via ..
€18.75
Ex Tax:€15.50
Model: X1012
This PCIe to M.2 adapter board from SupTronics allows, for example, an NVMe M.2 SSD to be connected to the Raspberry Pi 5. The board can also function as power supply via PoE or the DC-jack...
€23.25
Ex Tax:€19.21
Model: X1200
A UPS (uninterruptible power supply) module for the Raspberry Pi 5...
€30.25
Ex Tax:€25.00
Model: X1202
A UPS (uninterruptible power supply) module for the Raspberry Pi 5. We also sell a case for this module: X1202-C1 Metal Case..
€39.50
Ex Tax:€32.64
Model: TP4056PROTECT
A li-ion charger with micro-USB connection in combination with a li-ion protection circuit for too high discharge currents or too low a battery voltage.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% ac..
€2.00
Ex Tax:€1.65
Model: TP4056
A fairly simple li-ion charger with mini-USB connection.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% accuracy)
Input voltage: 4.5V-5.5V
Two LED's indicating the status of loading
Mini-USB input..
€1.50
Ex Tax:€1.24
Model: TP4056PROTECTUSB-C
A li-ion charger with USB-C connection in combination with a li-ion protection circuit for too high discharge currents or a low battery voltage.
Specifications:
Charging current: 1A (maximum)
Maximum charging voltage: 4.2V (1.5% accuracy)
..
€2.50
Ex Tax:€2.07
Model: UL7-12
A 12V lead-acid battery with a capacity of 7.0Ah...
€15.00
Ex Tax:€12.40
Model: USBADJDCDC3WSEGMENT
A step-up-down (buck-boost) DC-DC converter with a USB male and micro USB connection. This module has a potentiometer for setting the output voltage and a voltage meter with display to measure the output voltage. The display can be turned off with a ..
€3.50
Ex Tax:€2.89
Model: USBDCDC1000LI-ION
A complete DC-DC converter to boost the Li-ion voltage to 5V USB voltage. This module has a built-in li-ion charge and protection circuit against over- and undervoltage, overtemperature (chip) and short-circuit protection.
This is therefore very s..
€2.50
Ex Tax:€2.07
Model: USBDCDC600
A DC-DC converter to boost low voltage to 5V USB voltage.
Specifications:
Range of input voltage (Vin): 0.9V - 5.0V
Output voltage: 5.0V
Efficiency: up to 96%
Output current: Fin> = 0.9V: 100mA, Fin> = 1.5V: 200mA, Fin&..
€1.50
Ex Tax:€1.24
Model: USBLOAD1A-2A
This module can be connected to a USB port to act as a load.
With a switch you can switch between 1A and 2A load.
There is an LED indication to indicate the position:
Red: 2A
Green: 1A
Note: The module can become hot with long use...
€1.50
Ex Tax:€1.24
Model: USBPDTRIG
This USB PD trigger module allows you to request specific voltages (5V, 9V, 12V, 15V and 20V) from a USB-PD power supply. In addition to USB PD, other protocols are also supported. Use the button to switch between voltages. If the LED next to a volta..
€4.00
Ex Tax:€3.31
Model: USBDC-DCQC3.0
A DC-DC converter to lower a high voltage to 5V USB voltage with fast charging function.
Specifications:
Input voltage range (Vin): 6V - 32V
Output: 5.0V with 3.4A, 9V*with 2.5A and 12V ** with 2A
Efficiency: 90-97%
LED indicating the ..
€3.50
Ex Tax:€2.89
Model: QC-MINI
A DC-DC converter to reduce a high voltage to 5V USB voltage with fast charging function.
Specifications:
Input voltage: 6 - 32V DC
Output voltage: 5.0V DC, 9V DC* or 12V DC** (depending on load fast charging support, 5V default)
Maximum..
€3.50
Ex Tax:€2.89
Model: VARTACR2450
A standard CR2450 battery from Varta...
€2.25
Ex Tax:€1.86
Model: VARTA4XAA
An alkaline AA battery from Varta...
€1.50
Ex Tax:€1.24
Model: WS-26362
With this module, a Li-ion/li-Po battery can easily be charged with a solar panel (battery and solar panel are not included). If there is not enough sun, the battery can also be charged via the USB-C connection (USB-C cable is not included). In addit..
€10.50
Ex Tax:€8.68
Model: WS-18014
Brand: Waveshare
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. There is also a built-in fan for cooling the Raspberry Pi, which can be turned on by default or programmed when it turns on. In addition, th..
€19.00
Ex Tax:€15.70
Model: WS-19445
Brand: Waveshare
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. There is also a built-in fan for cooling the Raspberry Pi, which can be turned on with a switch.
This module is suitable for the Raspberr..
€19.00
Ex Tax:€15.70
Model: WS-19532
Brand: Waveshare
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. There is also a built-in fan for cooling the Raspberry Pi, which can be turned on with a switch. This version fits in the Official Raspberry..
€18.50
Ex Tax:€15.29
Model: WS-23285
Brand: Waveshare
With this small Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. Due to its small size, it fits in many standard Raspberry Pi housings.
This module is suitable for the Raspberry Pi 3B+ and 4B.
..
€16.00
Ex Tax:€13.22
Model: WS-26399
Brand: Waveshare
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. Additionally, there is a built-in fan for cooling the Raspberry Pi.
This module is suitable for the Raspberry Pi 5.
Note: To use the P..
€19.50
Ex Tax:€16.12
Model: WS-27670
Brand: Waveshare
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection.
This module is suitable for the Raspberry Pi 5.
Note: To use the PoE function, a switch or router that supports PoE or a PoE injector ..
€15.00
Ex Tax:€12.40
Model: WS-26357
An ML2032 battery with a JST-SH connector that is rechargeable and can be connected to the Raspberry Pi 5 as RTC back-up battery.
Note: Raspberry Pi is not included...
€3.25
Ex Tax:€2.69
Model: WS-16120
Brand: Waveshare
With this module, a Li-ion/li-Po battery can easily be charged with a solar panel (battery and solar panel are not included). If there is not enough sun, the battery can also be charged via the micro USB connection (micro USB cable is not included). ..
€10.50
Ex Tax:€8.68
Model: WS-19694
Brand: Waveshare
This battery module from Waveshare is made for the Raspberry Pi Pico or other microcontrollers that use the same pin layout. With this module and a 14500 Li-ion battery (not included) you provide your microcontroller with an uninterrupted power suppl..
€14.00
Ex Tax:€11.57