Model: EASYDRIVER4.4
Easy motor control for a bipolar stepper motor (2 phase stepper motor).
This is version 4.4 of the EasyDriver designed by Brian Schmalz, most of the information can be found on his page about this product: Easy Driver Stepper Motor Driver.
Specif..
€7.00
Ex Tax:€5.79
Model: A4988DRIVERMOD
This stepper motor driver module can be used separately or in combination with a CNC shield.
Specifications:
Voltage range: 8-35V
Maximum current: 1A (continuous), 2A (peak)
Works with 3.3V and 5V signals
Current limit that can be set ..
€3.00
Ex Tax:€2.48
2-4 Weeks
Model: BTT-CLSTEPPER23
A powerful closed loop stepper motor and driver combination for, for example, 3D printers or CNC machines. This motor-driver combination automatically corrects for lost steps using an encoder, thus preventing layer shifts in 3D prints, for example. B..
€65.00
Ex Tax:€53.72
Model: TLSMOOTHER
With this TL-Smoother, vibrations in a stepper motor can be reduced. This makes the motor quieter and in the case of 3D printers it can lead to better prints. The effect is especially noticeable in combination with a DRV8825 or A4988 stepper motor ..
€3.50
Ex Tax:€2.89
Model: DRV8825DRIVERMOD
This stepper motor driver module can be used separately or in combination with a CNC shield.
Specifications:
Voltage range: 8.2-45V
Maximum current: 2.5A per phase (continuous, with cooling), 1.5A per phase (continuous without cooling)
W..
€4.50
Ex Tax:€3.72
Model: DRV8833MOD
A motor control for two DC motors or a bipolar stepper motor (2 phase stepper motor).
The names of the connections are visible on the PCB.
Specifications:
Voltage range (signals): 0-5V
Voltage range (power supply for motors): 3-10V DC
..
€3.00
Ex Tax:€2.48
Model: HY-DIV268N-5A
Easy to set stepper motor control for a bipolar stepper motor .
Specifications:
Voltage range (power supply): 8-42VDC (12-36V recommended)
Voltage range (signals): 2.0-5.5V
Maximum peak current per bridge (adjustable via dipswitch)..
€14.00
Ex Tax:€11.57
Model: LV8729DRIVERMOD
This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer.
This is a quieter variant for the standard A4988 module.
Specifications:
Voltage range (VM): 6-36V
Voltage range (VIO): 3.3-5V
..
€8.00
Ex Tax:€6.61
Model: M5STACK-M035
This is a stepper motor module for the M5Core with three stepper motor drivers and the possibility to connect three end stops.
There are also additional modules available such as a 5V fan module to cool down the drivers.
Specifications:
S..
€32.50
Ex Tax:€26.86
New
Model: TB6600
Easy to set stepper motor control for a bipolar stepper motor .
Specifications:
Voltage range (signals): 3.3-24V
Voltage range (power supply): 9-42V (12-24V recommended)
Maximum current per bridge (adjustable via dipswitch): 0.5A, ..
€10.00
Ex Tax:€8.26
Model: TB67S109DRIVERMOD
This stepper motor driver module can be used separately or in combination with a CNC shield. The motor driver is suitable for motors that require higher currents, such as a Nema 23 stepper motor.
Specifications:
Voltage range: 10-47V
..
€8.00
Ex Tax:€6.61
On request
Model: TMC2130DRIVERMODV1.1
This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer.
This V1.1 has the SPI pins soldered upwards so that they are accessible from above.
Specifications:
Voltage range(VM): 5.5-45V
Volt..
€10.50
Ex Tax:€8.68
Model: TMC2208DRIVERMOD
This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer.
Specifications:
Voltage range(VM): 5.5-36V
Voltage range(VIO): 3.3-5V
Maximum current: 1.2A per phase (continuous, with cooling), ..
€8.00
Ex Tax:€6.61
2-4 Weeks
Model: TMC2209DRIVERMOD
This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer.
Specifications:
Voltage range (VM): 4.75-29V
Voltage range (VIO): 3.3-5V
Maximum current: 2.0A per phase (continuous, with cooling..
€8.00
Ex Tax:€6.61
Model: TMC2225DRIVERMODV1.1
This TMC2225 is similar to the TMC2208 Motor Driver. This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer.
Specifications:
Motor voltage range (VM): 4.75-36V
Logic voltage range (VIO): 3..
€8.50
Ex Tax:€7.02
On request
Model: TMC5160DRIVERMOD
This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer.
This stepper motor driver is intended for motors with a higher power and amperage, suitable for, among other things, NEMA17 and NEMA23.
Spe..
€24.00
Ex Tax:€19.83
Model: ULN2003
The ULN2003 is an array of seven Darlington transistor pairs. With this, a signal can be amplified to 50V and 500mA per channel. The signal pins work with both 3.3V and 5V logic. The built-in flyback diodes protect the chip against inductive loads, s..
€0.50
Ex Tax:€0.41
Model: WS-15669
With this HAT for Raspberry two stepper motors can be controlled. The module also has a built-in voltage converter that can be used to power the Raspberry Pi.
Specifications:
Supply voltage: 8.2-28V DC (via 5.5mm DC jack)
Signal voltage: 3..
€24.00
Ex Tax:€19.83
Showing 1 to 19 of 19 (1 Pages)