Model: RAK-100076
An ethernet module from RAKwireless for the modular WisBlock system.
The ethernet module can also be expanded with PoE with the RAK19018 PoE Module...
€9.75
Ex Tax:€8.06
Model: RAK-205008
This LoRa tracker from RAKwireless initially looks like a simple sticker but has number of features such as a tracker function, built-in battery (not rechargeable), and temperature sensor. The RAK2270 comes with the Trackpack software through wh..
€26.00
Ex Tax:€21.49
Model: RAK-110000
A Wi-Fi communication module from RAKwireless for the modular WisBlock platform, based on the ESP32-WROVER. The module is pre-programmed with the Espressif AT command interface, but can also be reprogrammed...
€11.50
Ex Tax:€9.50
Model: RAK-305057
The RAK3172-T is a microcontroller module with built-in LoRa functionality based on the STM32WLE5CC chip...
€9.75
Ex Tax:€8.06
Model: RAK-311027
An energy-efficient LoRa module from RAKwireless. The module is based on a STM32WLE5 chip, which can also be reprogrammed...
€16.50
Ex Tax:€13.64
Model: RAK-315046
An energy-efficient LoRa module from RAKwireless. The module is based on a STM32WLE5 chip, which can also be reprogrammed...
€21.50
Ex Tax:€17.77
Model: RAK-100003
An RS485 module from RAKwireless for the modular WisBlock system...
€7.25
Ex Tax:€5.99
Model: RDM6300
This RFID reader reads 125kHz RFID tags with the EM4100 protocol (such as the EM4100 Key Tag).
Specifications:
Input voltage: 5V
Input current: 50mA
Frequency: 125 kHz
Baud rate: 9600
EM4100 protocol compatible
Output: Serial..
€5.00
Ex Tax:€4.13
Model: RF-BM-2652P2
Note: The chip does not have extensive support (in the Arduino IDE, for example), only buy this product if you know how to work with it...
€11.50
Ex Tax:€9.50
Model: RDM6300MOD
With this RFID card reader you can read cards/tags for your project. The data can be read via UART. While sending the serial data, pin J1 is pulled up and thus gives an indication of a successful card/tag reading. At the same time, pin J2 is also act..
€4.50
Ex Tax:€3.72
Model: RC522
With this RFID kit you can read Mifare tags and cards for your project.
Specifications:
Supply voltage: 3.3V DC
Continuous Current: 13-26mA / DC 3.3V
Idle Current: 10-13mA / DC 3.3V
Sleep current draw: <80uA
Peak current: <30mA..
€7.00
Ex Tax:€5.79
Model: PN532MODKIT
This PN532 RFID module can also send data via NFC, in addition to sending and receiving Mifare tags.
The module can be controlled via SPI, I2C or UART.
Specifications:
Chip: NXP PN532
Voltage: 3.3 - 5V DC
Supports various RFID products ..
€6.00
Ex Tax:€4.96
Model: WRISTBAND-TK4100-BELT
A blue wristband with a belt buckle clasp that has a 125kHz TK4100 chip. The TK4100 is compatible with EM4100/EM4102/EM4200 chips and can be read with the RDM6300 RFID reader. The chip cannot be reprogrammed, it can only be read.
Specificatio..
€3.00
Ex Tax:€2.48
Model: WRISTBAND-TK4100-ELASTIC
A blue wristband with an elastic band that has a 125kHz TK4100 chip. The TK4100 is compatible with EM4100/EM4102/EM4200 chips and can be read with the RDM6300 RFID reader. The chip cannot be reprogrammed, it can only be read.
Specifications:
..
€3.00
Ex Tax:€2.48
Model: WRISTBAND-TK4100-SNAP
A blue wristband with a snap fastener that has a 125kHz TK4100 chip. The TK4100 is compatible with EM4100/EM4102/EM4200 chips and can be read with the RDM6300 RFID reader. The chip cannot be reprogrammed, it can only be read.
Specifications:
..
€3.00
Ex Tax:€2.48
Model: DB9TOOBD2CABLE
This cable is suitable for the CAN bus shield and converts the pins of the RS232(DB9) connector to a standard OBD2 connector that is suitable for most cars.
See the images for the pinout...
€6.50
Ex Tax:€5.37
Model: PIS-0702
Plug & Play USB device from Ryanteck that adds 28 GPIO pins to your PC, Mac or Linux computer!
Specifications:
28 GPIO pins
40 Pin header
Compatible with most Raspberry Pi accessories en HATs
Package Contents:
1..
€14.50
Ex Tax:€11.98
Model: S50STICKER
An S50 Mifare tag sticker.
Specifications:
Diameter: 25 mm
Thickness: 0.1 mm
Frequency: 13.56 MHz
Distance: 1-10 cm..
€1.00
Ex Tax:€0.83
Model: SEEED-103030215
With this CAN bus shield from Seeed Studio you can connect your Arduino Uno (or a compatible variant) to a CAN bus, for example that of a car.
Specifications:
CAN Bus:
Tranceiver chip: MCP2551
Controller chip: MCP2515
Maximum tra..
€31.25
Ex Tax:€25.83
Model: SEEED-113020002
An RFID reader module from Seeed Studio suitable for reading EM4100 compatible RFID cards/tags.
Specifications:
Supply voltage: 4.75 - 5.25V DC
Signal voltage: 4.75 - 5.25V (same as supply voltage)
Communication:
Interface: UART
..
€15.50
Ex Tax:€12.81
Model: SEEED-109020022
A GNSS module from Seeed Studio...
€12.00
Ex Tax:€9.92
Model: SEEED-113020091
A LoRa module from Seeed Studio, based on the LoRa-E5 chip. The module has a built-in antenna and is easy to control via UART.
Specifications:
Supply voltage: 3.3 - 5V DC
Signal voltage: 3.3V (5V tolerant)
Communication:
Interface:..
€23.50
Ex Tax:€19.42
Model: SEEED-114992751
The SenseCAP M2 Light Hotspot from Seeed is a LoRaWAN gateway that connects to the Helium LongFi network (unlimited software license is included). By connecting the device you can earn Helium coins (HNT) when other LoRaWAN devices send data via your ..
€114.25
Ex Tax:€94.42
Model: SEEED-114992872
This SenseCAP data logging module from Seeed Studio can read sensors (1x RS485 or 2x analog current or 2x analog voltage or 1x GPIO) and send this data wirelessly over great distances with LoRaWAN. Due to the IP66 dust-proof and water-proof housing, ..
€80.00
Ex Tax:€66.12
Model: AD620-MODULE
This instrumentation amplifier module can be used to amplify AC or DC signals. Both the gain and the offset are adjustable with the built-in potentiometers.
Specifications:
Supply voltage: 3 - 12V DC (maximum 11V DC recommended)
Input sign..
€6.50
Ex Tax:€5.37
Model: SIM7600E-L1CMOD
A telecom module based on the SIM7600E-L1C. The module is controlled via AT commands.
Note: The module does not include a telecom and/or GNSS antenna. These can be ordered separately: Antennas..
€33.50
Ex Tax:€27.69
Model: WS-19543
This SIM7600G-H Module from SIMCom is a powerful 4G LTE Cat-4 module with global coverage and GNSS support. Featuring a mini-PCIe connector, this module is easy to integrate into IoT applications such as security devices, industrial routers, and remo..
€76.00
Ex Tax:€62.81
Model: SIT65HVD08P
SIT65HVD08 is a half-duplex driver and receiver for RS485 and RS422 communicatio up to 10Mbps. Multiple transceivers can form a RS485 bus, and the SIT65HVD08P features built-in overvoltage, overcurrent and thermal protection...
€1.50
Ex Tax:€1.24
Model: IRREMOTE
A small remote control that can be used in combination with the HX1838 infrared receiver.
More information: Tutorial
Note: No battery (CR2025 or CR2032) is supplied with this remote control...
€1.00
Ex Tax:€0.83
Model: ZXACC-EXTRG-V10
An RS485 adapter module that can be placed as a shield on the Smart Panlee 7 inch Serial Screen.
Note: No cables are included, they can be ordered separately here:
Molex Picoblade (compatible) cable 4p (for RS485)
Molex Picoblade (compatib..
€3.50
Ex Tax:€2.89
Model: ZXACC-ESPDB
The ZXACC-ESPDB is a USB to serial converter specifically designed for programming Panlee products...
€6.00
Ex Tax:€4.96
Model: SN74AHCT125N
A fast four-channel level converter optimized to convert 3.3V signals to 5V. For example, this converter is very suitable to convert signals from 3.3V microcontrollers such as an ESP8266, ESP32 or Raspberry Pi to 5V signals for WS281X or SK6812 digit..
€1.00
Ex Tax:€0.83
Model: SONOFF-RFREMOTE
With the Sonoff 433MHz RF Remote Control you can easily switch other Sonoff products that have a built-in RF receiver.
Specifications:
RF frequency: 433MHz
Number of buttons: 4
Also works with other home automation systems via eg RFXCOM ..
€3.50
Ex Tax:€2.89
Model: SONOFF-RM433R2
The Sonoff RM433R2 is an RF remote control with which you can easily operate other Sonoff products. The remote has additional functions when used with a Sonoff IFan03 Wi-Fi Fan & Light Controller and Sonoff D1 Wi-Fi Smart Dimmer.
The differenc..
€8.00
Ex Tax:€6.61
Model: SONOFF-ZBDONGLE-E
A Zigbee dongle from Sonoff that can be used, for example, as a Zigbee router for Home Assistant. Besides Zigbee, the dongle also supports other protocols, including Thread, if other software is installed on it using the following tool: Sonoff Dongle..
€20.50
Ex Tax:€16.94
Model: SP3232MOUNT
A module to connect an RS232 cable to your embedded system that has a UART connection.
The module only needs to be equipped with 3.0 to 5.5V and the TX, RX, CTS and RTS signals from the UART can be set up for communication.
6 Dupont Female-Fema..
€5.00
Ex Tax:€4.13
Model: 4CHLVLCONV
Some modules work with 3.3V I2C or SPI. This is very useful if your system works with 5V.
This module has 4 bi-directional channels and is therefore suitable for almost all standard communication such as I2C (2x), SPI (1x) or UART (2x). This conve..
€1.50
Ex Tax:€1.24
Model: STLINKV2-COMP
The ST-LINK V2 Compatible is an in-circuit debugger and programmer for the STM8 and STM32 microcontrollers.
Package content:
1x ST-LINK V2 Compatible
1x 4p female -> 4p female dupont cable
Tools for the ST-LINK V2: Driver + Fi..
€5.50
Ex Tax:€4.55
Model: T1-433MHZRFTRANSMITTER
A small RF transmitter.
Specifications:
Supply voltage: 2 - 12V DC
Signal voltage: 2 - 12V DC
Nominal current: ~18mA
RF transmitter:
Frequency: 433.92MHz
Transmit power: 15dBm/31.6mW (at 3V)
Maximum transfer rate: 4.8kB/s
..
€2.25
Ex Tax:€1.86
Model: TAO-FXP611.07.0092C
An antenna from Taoglas that is suitable for GNSS signals...
€8.00
Ex Tax:€6.61
Model: TAO-FXUB63.07.0150C
An antenna from Taoglas with high quality and a very wide frequency range...
€8.50
Ex Tax:€7.02
Model: TEA5767
A module to listen FM radio.
See the following page for more information: TEA5767 FM Radio Breakout Board for Arduino
Note: The module is quite small, in the tutorial is shown how to solder it. A soldering iron with a small tip (for SMD) is hig..
€2.50
Ex Tax:€2.07
Model: TEENSYETHERNETKIT-4.1
With this DIY kit you provide the Teensy 4.1 with an ethernet connection.
This product comes with loose parts and still needs to be soldered.
For more information, see this page: PT8211 Ethernet Kit..
€11.00
Ex Tax:€9.09
Model: CALYX-4G
This European made Calyx 4G is a HAT by Teltonika for Raspberry Pi to use various generations of telecommunications. This module supports calling, SMS, and data transfer.
Note: Antennas are not included, we recommend the following antenna (2 piece..
€49.50
Ex Tax:€40.91
Model: TXS0108E
Some modules work with 3.3V I2C or SPI, then this is very useful if your system works with 5V.
This module with TXS0108E chip has 8 bi-directional channels and is therefore suitable for almost all standard communication such as I2C (4x), SPI..
€3.00
Ex Tax:€2.48
Model: SH-LORA-E5
A LoRaWAN shield for the TinyPICO, TinyS2/S3/C6 or ProS3 development boards. The shield is based on the LoRa-E5 module from Seeed Studio. Furthermore, the shield has two antenna options and a connector for a Li-ion/Li-Po battery (module has no chargi..
€22.25
Ex Tax:€18.39
Model: USBHOSTSHIELD
This shield can easily be placed on an Arduino Uno, Arduino Mega or Arduino Due. The shield makes a USB host of the microcontroller such that, for example, a mouse or keyboard can be connected to the Arduino.
The following types of devices are sup..
€12.00
Ex Tax:€9.92