Menu
Your Cart

Communication and Signals - page 3

The TrackerD is a long range and low power consumption LoRaWAN Bluetooth tracker...
€59.75
Ex Tax:€49.38
Model: DRAGINO-LSN50V2-8-868M16
Dragino's LSN50 is a long-range LoRa sensor node. It is designed for outdoor use and is powered by a built-in Li/SOCl2 battery for long life. Note: The network keys can be found in the box. This product cannot therefore be returned if the packagin..
€65.00
Ex Tax:€53.72
EasyCAT EtherCat Shield - for Arduino
On request
Model: ABT-ECAT-SHIELD
The EasyCat Shield is an EtherCat shield that can be used to make an EtherCat Slave from an Arduino. EtherCat is a modification of the well-known Ethernet protocol and offers the possibility to connect a bus of devices. Watch this video for a short ..
€72.50
Ex Tax:€59.92
Model: ABT-ECAT-GATEWAY
The EasyCat Gateway is a device that can exchange data between an EtherCat bus and a USB Host or Ethernet network. EtherCat is a modification of the well-known Ethernet protocol and offers the possibility to connect a bus of devices. Watch this vide..
€105.00
Ex Tax:€86.78
Model: EM4100TAG
EM4100 key tag for the RDM630 RFID reader. Frequency: 125kHz Color: Blue Note: This product can be supplied with a EM4100 or (compatible) TK4100 chip...
€0.80
Ex Tax:€0.66
Model: ES9018K2MDAC
A DAC module with very low THD and noise that works with I2S (inter-IC sound), suitable for converting digital audio to an analog stereo signal...
€11.50
Ex Tax:€9.50
Model: ES9023DAC
A DAC module that operates on the I2S (inter-IC sound) interface, suitable to convert a digital audio signal to an analog signal. Operates on a 5V input voltage. Specifications: Input voltage: 5VDC Samplerate: 192 KHz Chip: ES9023 of ES9..
€12.50
Ex Tax:€10.33
Model: ESPLINKV1.0
This ESP LINK can be used for firmware upgrades, serial port debugging and programming the ESP8266 ESP-01(S). This ESP LINK is supported by the "Arduino IDE", "ESP8266Flasher" and "Espressif Flash Download Tools". The ESP8266 ESP-01(S) can go directl..
€4.00
Ex Tax:€3.31
Model: ESPLINKCH340CV1.0
This ESP LINK can be used for firmware upgrades, serial port debugging and programming the ESP8266 ESP-01(S). This ESP LINK is supported by the "Arduino IDE", "ESP8266Flasher" and "Espressif Flash Download Tools". The ESP8266 ESP-01(S) can go directl..
€2.50
Ex Tax:€2.07
ESP-PROG - Programmer for ESP32 and ESP8266
Discontinued
Model: ESP-PROG
This ESP Programmer is a handy module for programming and debugging an ESP32 or ESP8266. In addition, the JTAG debugging function is available for ESP32. The programmer is easy to connect to a computer using the Micro USB port. This ESP programmer ha..
€20.00
Ex Tax:€16.53
Model: ESP32-CAM-MB
This is a shield that has been specially developed for the ESP32- CAM - Wi-Fi and Bluetooth Board with OV2640 Camera. The ESP32-CAM is a very handy module, but it lacks a USB connection that makes it easy to upload new code. Due to the USB connection..
€2.75
Ex Tax:€2.27
Model: ESP32-WROOM-32E-N16
A standard WROOM module based on an ESP32 microcontroller with built-in Wi-Fi and Bluetooth...
€5.00
Ex Tax:€4.13
Model: ESP32-WROOM-32UE-N16
A standard WROOM module based on an ESP32 microcontroller with built-in Wi-Fi and Bluetooth...
€5.25
Ex Tax:€4.34
Model: ESP32-WROVERIPEXANT
This ESP32-WROVER Wi-Fi module is an ESP32 based module with Wi-Fi and Bluetooth. This module features the ESP32 REV1 chip (240MHz dual core processor) with 4MB SPI flash and 4MB PSRAM memory. For more information see the datasheet under the..
€4.50
Ex Tax:€3.72
Model: ESP32-WROVER-E-N16R8
This ESP32-WROVER Wi-Fi module is an ESP32 based module with Wi-Fi and Bluetooth...
€5.50
Ex Tax:€4.55
Model: ESP32-WROVER-E-N8R8
This ESP32-WROVER Wi-Fi module is an ESP32 based module with Wi-Fi and Bluetooth...
€5.25
Ex Tax:€4.34
Model: ESP32-WROVER-IE-N16R8
This ESP32-WROVER Wi-Fi module is an ESP32 based module with Wi-Fi and Bluetooth...
€6.25
Ex Tax:€5.17
Model: ESP32-WROVER-IE-N8R8
This ESP32-WROVER Wi-Fi module is an ESP32 based module with Wi-Fi and Bluetooth...
€5.25
Ex Tax:€4.34
Model: ESP-ETHERNET-INTERFACE
An ethernet module for the Thread Border Router and Zigbee Gateway...
€13.50
Ex Tax:€11.16
Model: ENC28J60
This ethernet module can be connected to eg an Arduino Uno or Arduino Mega. The names of the pins are listed on the PCB. Specifications: Voltage: 3.3V DC Control: SPI Dimensions: 48.8 x 18.5mm For more information see this tutoria..
€6.00
Ex Tax:€4.96
Model: ENC28J60MOUNT
This module can be connected to eg an Arduino Uno or Arduino Mega. The names of the pins are listed on the PCB. Specifications: Voltage: 3.3V DC Control: SPI Has four 3mm holes for mounting Dimensions: 56 x 34mm For more informat..
€5.50
Ex Tax:€4.55
Model: W5100
You can easily use this shield on an Arduino Uno (5V), Arduino Mega (5V), Arduino Due (3.3V), etc. You can connect a micro SD card to store files such as images. For example, these images can be incorporated into a website. There are different versio..
€9.50
Ex Tax:€7.85
Model: FMAMANTEXT
This FM/AM antenna is extendable and can be tilted. In addition, it has a hole with which it can be mounted. Dimensions: Length of antenna (extended): ~230mm Diameter: 6mm For other dimensions, see the images..
€2.50
Ex Tax:€2.07
Model: FSC-BT616
The Feasycom BT616 is a Bluetooth 5.1 module that can be used for high speed data transfers...
€7.25
Ex Tax:€5.99
Model: FSC-BT836B
The Feasycom BT836B is a dual mode (BR/EDR+BLE) Bluetooth 5.0 module that can be used for high speed data transfers. It supports SPP, HID, GATT, ATT, GAP. Furthermore, this module supports MFi, Airsync, iBeacon and OTA (Over-the-air) u..
€8.50
Ex Tax:€7.02
Model: FSC-DB004-BT616
The Feasycom BT616 is a dual mode (BR/EDR+BLE) Bluetooth 5.0 module that can be used for high speed data transfers. It supports GATT, ATT, GAP, SMP, L2CAP. Furthermore, this module supports MFi and OTA (Over-the-air) upgrade. Specif..
€11.00
Ex Tax:€9.09
Feasycom DB004-BT646 Bluetooth 4.2 Module
2-4 Weeks
Model: FSC-DB004-BT646
The Feasycom BT646 is a single mode bluetooth BLE 4.2 module. It can be used as an application processor or data pump in a fully hosted system. Specifications: Supply voltage: 3.6 - 6V Data voltage: 3.3V UART interface (RX and TX) Dime..
€4.50
Ex Tax:€3.72
Model: FSC-DB004-BT826E
The Feasycom BT826 is a dual mode (BR/EDR+BLE) Bluetooth 4.2 module (HC-05 compatible). It supports SPP, BLE, ANCS, iBeacon and more.  Specifications: Supply voltage: 3.6 - 6V DC Data voltage: 3.3V UART interface (RX and TX) ..
€6.00
Ex Tax:€4.96
Model: FSC-DB004-BT836
The Feasycom BT836 is a dual mode (BR/EDR+BLE) Bluetooth 4.2 module. It supports SPP, HID, GATT, ATT, GAP. Furthermore, this module supports Apple MFi (iAP2), iBeacon. Specifications: Supply voltage: 3.6 - 6V DC Data voltage: 3.3V U..
€7.00
Ex Tax:€5.79
Model: FSC-DB004-BT836B
The Feasycom BT836B is a dual mode (BR/EDR+BLE) Bluetooth 5.0 module that can be used for high speed data transfers. It supports SPP, HID, GATT, ATT, GAP. Furthermore, this module supports MFi, Airsync, iBeacon and OTA (Over-the-air) u..
€10.00
Ex Tax:€8.26
Model: FISCHL-I2C-MP-USB
I2C-MP-USB is a interface to connect I2C devices via USB to a host system. It aims to easily control I2C slaves with highly portable code...
€27.00
Ex Tax:€22.31
Model: FISCHL-USBLINI-EB
USBlini is an interface to connect a LIN bus via USB to a host system. It provides easy access to LIN bus devices and can act as both master and slave. It features a logic analyzer function to sample the logic levels on the LIN RX line...
€32.00
Ex Tax:€26.45
Model: FISCHL-USBTIN-EB
USBtin is an open source USB to CAN interface for monitoring and transmitting CAN messages. It's easy to use and has a virtual comport on your computer that can be controlled with simple commands...
€37.50
Ex Tax:€30.99
Model: FT232USBCABLE
You can call it the most reliable USB to serial converter that you can find! Many operating systems support this standard chip. If it does not install automatically, then look for the driver for your operating system here . Specifications: ..
€8.00
Ex Tax:€6.61
Model: FT232USB
The most reliable usb to serial converter that you can find! This is almost indispensable if you want to be able to program Pro Mini (automatically) . Many operating systems support this chip by default. If it is not automatically installed, pleas..
€7.50
Ex Tax:€6.20
FT232RL TTL USB to Serial Converter - USB-C - 3.3-5V
2-4 Weeks
Model: FT232USB-C
A USB to serial converter that can be configured for 3.3V or 5V using a jumper...
€7.50
Ex Tax:€6.20
Model: LoRa-CC68-433
A LoRa module from G-NiceRF...
€6.00
Ex Tax:€4.96
Model: LORA-CC68-868
A LoRa module from G-NiceRF...
€6.00
Ex Tax:€4.96
Model: LORA1262-868
A LoRa module from G-NiceRF...
€9.75
Ex Tax:€8.06
Model: LoRa1276-C1-868
A LoRa module from G-NiceRF...
€8.50
Ex Tax:€7.02
Model: GPSANTUFLPCB
..
€3.50
Ex Tax:€2.89
Model: GSMANTQBHELIX
Specifications: Gain: 2-3dBi Impedance: 50 Ohm Frequency range: 824MHz - 960MHz or 1710 MHz - 1990MHz Length total: 24mm Diameter: 5mm..
€0.50
Ex Tax:€0.41
Model: GSMPCBANTQBUFL
Specifications: Connector type: uFL (I-PEX) Gain: 3dBi Impedance: 50 Ohm Frequency range: 800MHz - 960 MHz of 1710 MHz - 2170MHz Length total: 15cm Adhesive strip for mounting..
€0.75
Ex Tax:€0.62
Model: GT-24-WLMOD-MINI
A wireless RF transceiver module that uses the 2.4GHz band and has a range of up to 1000 meters. This module is comparable to the NRF24L01+ module that we already sell, but the GT-24 has an additional power amplifier (PA) and low noise amplifier (LNA..
€4.00
Ex Tax:€3.31
Model: GT-24-WLMOD
A wireless RF transceiver module that uses the 2.4GHz band and has a range of up to 1000 meters. This module is comparable to the NRF24L01+ module that we already sell, but the GT-24 has an additional power amplifier (PA) and low noise amplifier (LNA..
€4.00
Ex Tax:€3.31
Model: GT-24-WLMOD-SHEADERS
A wireless RF transceiver module that uses the 2.4GHz band and has a range of up to 1000 meters. This module is comparable to the NRF24L01+ module that we already sell, but the GT-24 has an additional power amplifier (PA) and low noise amplifier (LNA..
€4.00
Ex Tax:€3.31
Model: GY-AD9833
This DDS (Direct Digital Synthesizer) module with AD9833 chip can generate a certain desired signal...
€9.50
Ex Tax:€7.85
Model: GY-GPSV3-NEO-M8N
A GPS module that works with UART (TX and RX) signals. The required GPS antenna is included with the module. The TinyGPS++ library can be used to read the GPS module: TinyGPS++..
€20.75
Ex Tax:€17.15
Model: GY-GPSV3-M9N
A GPS module that works with UART (TX and RX) signals. The required GPS antenna is included with the module. The TinyGPS++ library can be used to read the GPS module: TinyGPS++..
€26.75
Ex Tax:€22.11
Showing 101 to 150 of 452 (10 Pages)
1
false
true
true
Remove
Change
tr