Model: 12VREL16L-SD
An easy to use low active relay module with 16 relays in total. In addition, this module also contains a voltage converter to power the circuit and possibly an external microcontroller.
Specifications:
Supply voltage: 12V DC (via VCC pin)
..
€14.00
Ex Tax:€11.57
Model: 12VRELADJ
A relay with an adjustable delay that works on 12V. As soon as the relay is powered with 12V, it takes a few (adjustable) seconds before the relay switches. The relay will only switch back when the input voltage disappears (see images).
Specificat..
€2.50
Ex Tax:€2.07
Model: 12VRELADJ-1H-NONCADJ
A relay with an adjustable delay that works on 12V. As soon as the relay is powered with 12V, it takes a few (adjustable) seconds before the relay switches. The time can be set between 0.1s and 1 hour. In addition, this relay module can also be set t..
€5.00
Ex Tax:€4.13
Model: 3DMOSFET30A-MINI
This is a high power MOSFET module specifically intended for 3D printers. The module can be connected to a heated bed or hotend and can handle a PWM signal.
Specifications:
Input voltage: 12-24V DC
Maximum current: ~30A
Signal (PWM) volt..
€6.50
Ex Tax:€5.37
Model: 3DMOSFET30A
This is a high power MOSFET module specifically intended for 3D printers. The module can be connected to a heated bed or hotend connection and can handle a PWM signal.
Specifications:
Input voltage: 12-24V DC
Maximum current: ~30A
..
€10.25
Ex Tax:€8.47
Model: 5VRELHA
A simple module with one relay.
This version works on 5V. The input works on 0V and 5V (active high).
The relay therefore switches if there is a signal of 5V on the input ("IN") and does nothing (not switched) with a signal of 0V.
..
€2.50
Ex Tax:€2.07
Model: 5VRELHL
An easy to use relay module that can be set to high- or low-active.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3-5V
Current per relay (when switched on): ~70mA
Signal current ("IN" pin): ~5mA
Maximum voltage through..
€2.50
Ex Tax:€2.07
Model: 5VREL2HL
An easy to use relay module that can be set to high- or low-active.
Pinout:
DC+: 5V supply voltage
DC-: Ground/GND
IN1-IN2: Signal pins
NO: Relay normally open
COM: Relay common
NC: Relay normally closed..
€4.50
Ex Tax:€3.72
Model: 5VREL2L
A moduele with two relays on board.
This version works on 5V. The input works on 0V and 5V (Active low).
The relay therefore switches if there is a 0V signal on the input ("IN") and does nothing (not switched) with a signal of 5V.
Specifica..
€4.50
Ex Tax:€3.72
Model: 5VREL4HL
An easy to use relay module that can be set to high- or low-active.
Pinout:
DC+: 5V supply voltage
DC-: Ground/GND
IN1-IN4: Signal pins
NO: Relay normally open
COM: Relay common
NC: Relay normally closed..
€7.00
Ex Tax:€5.79
Model: 5VREL4
A module with four relays on board.
This version works on 5V. The input works on 0V and 5V (Active low).
The relay therefore switches if there is a 0V signal on the input ("IN") and does nothing (not switched) with a signal of 5V.
Specifica..
€7.00
Ex Tax:€5.79
Model: 5VREL8HL
An easy to use relay module that can be set to high- or low-active.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3-5V
Current per relay (when switched on): ~70mA
Signal current ("IN" pins): ~5mA
Maximum voltage throug..
€10.00
Ex Tax:€8.26
Model: 5VREL8
A module with four relays on board.
This version works on 5V. The input works on 0V and 5V (active low).
The relay therefore switches if there is a 0V signal on the input ("IN") and does nothing (not switched) with a signal of 5V.
Specifica..
€10.00
Ex Tax:€8.26
Model: 5VRELL-ESP01
A relay module specially made to be switched by an ESP-01(S) module.
Note: An ESP-01(S) module is not included...
€2.50
Ex Tax:€2.07
Model: 5VSOLIDREL1H
A solid state relay (SSR) works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Relay type: G3MB-202P
Supply..
€4.00
Ex Tax:€3.31
Model: 5VSOLIDREL1L
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay ..
€4.00
Ex Tax:€3.31
Model: 5VSOLIDREL2L
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay ..
€5.50
Ex Tax:€4.55
Model: 5VSOLIDREL4H
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay ..
€8.00
Ex Tax:€6.61
Model: 5VSOLIDREL4L
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it is not subject to mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay th..
€8.00
Ex Tax:€6.61
Model: 5VSOLIDREL8H
A solid state relay (SSR) works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Relay type: G3MB-202P
Supply..
€12.00
Ex Tax:€9.92
Model: A000110
This Arduino 4 Relays Shield is a board with four individually controlled relays.
Specifications:
Operating voltage: 5V
Coil current: 35 mA (for each relay that is switched on, so 140 mA with all relays switched on)
Max. current pe..
€27.50
Ex Tax:€22.73
Model: AUSCONTACTBLOCK-NC
A contact block from Auspicious. Easily clicks on the large switches from Auspicious.
Specifications:
Contact: Normally closed (NC)
Maximum voltage: 240V AC / 30V DC
Maximum current: 3A
Resistance: 50mΩ (max)..
€2.00
Ex Tax:€1.65
Model: AUSCONTACTBLOCK-NO
A contact block from Auspicious. Easily clicks on the large switches from Auspicious.
Specifications:
Contact: Normally open (NO)
Maximum voltage: 240V AC / 30V DC
Maximum current: 3A
Resistance: 50mΩ (max)..
€1.50
Ex Tax:€1.24
Model: AUSESTOPSW-RED-1NC
This emergency stop switch from Auspicious consists of three parts. The lower part is the contact block, which also determines the electrical specifications of the switch. This part can be replaced by others of the same size. It is also possible to i..
€5.50
Ex Tax:€4.55
Model: AUSKEYKSW-1NO1NC
This key switch from Auspicious consists of three parts. The lower part is the contact block, which also determines the electrical specifications of the switch. This part can be replaced by others of the same size. With this switch it is possible to ..
€12.00
Ex Tax:€9.92
Model: AUSSELSW-3WAY-BK-2NO
This selector switch from Auspicious consists of three parts. The lower part is the contact block, which also determines the electrical specifications of the switch. This part can be replaced by others of the same size. With this switch it is po..
€5.50
Ex Tax:€4.55
Model: PBS-110-BLACK
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Max current: 1A
Contact: Normally open (NO)
Color: Black
Dimensions: See image..
€0.50
Ex Tax:€0.41
Model: PBS-33B-BLACK
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 1A (250V), 3A (<125V)
Hole for mounting: 12mm
See the images f..
€0.65
Ex Tax:€0.54
Model: AB6Y-A-BLACK
A push button that can be used as an on-off button. After pressing the button the button remains in a different position (lower or higher)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm..
€2.50
Ex Tax:€2.07
Model: AB6Y-M-BLACK
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Pin descriptions:
..
€2.50
Ex Tax:€2.07
Model: PBS-110-BLUE
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Max current: 1A
Contact: Normally open (NO)
Color: Blue
Dimensions: See image..
€0.50
Ex Tax:€0.41
Model: PBS-33B-BLUE
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 1A (250V), 3A (<125V)
Hole for mounting: 12mm
See the images f..
€0.65
Ex Tax:€0.54
Model: AB6Y-A-BLUE
A push button that can be used as an on-off button. After pressing the button the button remains in a different position (lower or higher)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm..
€2.50
Ex Tax:€2.07
Model: AB6Y-A-6.3V-BLUE
A push button that can be used as an on-off button. After pressing the button the button remains in a different position (lower or higher)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm..
€3.00
Ex Tax:€2.48
Model: AB6Y-M-BLUE
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Pin descriptions:
..
€2.50
Ex Tax:€2.07
Model: AB6Y-M-6.3V-BLUE
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Has built-in LED lightin..
€3.00
Ex Tax:€2.48
Model: BBTACT
This variant is ideal for use with a breadboard and very handy to use, because the somewhat long and straight pins.
Besides that, this button only has 2 pins, and can prevent confusion compared to the normal 4 pin verison.
Price is per piece...
€0.15
Ex Tax:€0.12
Model: SS22G08
A switch that you can build in.
Specifications:
ON-OFF switch
Suitable for 250VAC - 3A, 50VDC - 3A
Two mounting holes for M2.5 screws
See images for dimensions.
Note: The height of the plastic slider can differ from the photo. Th..
€0.60
Ex Tax:€0.50
Model: SS23F19
A switch that you can build in.
Specifications:
ON-OFF-ON switch
Suitable for 250VAC - 3A, 50VDC - 0.5A
Two mounting holes for M3 screws
See images for dimensions...
€0.60
Ex Tax:€0.50
Model: STARTCOMPKIT
A handy component kit for starting hobbyists.
Note: No nuts and washers are supplied with the potentiometers...
€5.00
Ex Tax:€4.13
Model: DFROBOT-DFR0144
Brand: DFRobot
A relay shield suitable for Arduino Uno (compatible) boards. In addition to the relays, this shield also has an adapter for an Xbee module and a number of servo connectors...
€15.50
Ex Tax:€12.81