Model: ROTENC
A rotary encoder with 20 steps per revolution. Rotary encoders are widely used in volume controls.
This rotary encoder can rotate and does not have, like almost all potentiometers, a start and end position.
However, rotary encoders must be read dig..
€0.75
Ex Tax:€0.62
Model: ROTARYENCMOD
A rotary encoder module that can be used, for example, to create a select or scroll button. The big advantage of a rotary encoder compared to a potentiometer is that there is no start and end position and that it can be read in which direction is tur..
€1.50
Ex Tax:€1.24
Model: ROTARYSWITCH1X11
A standard rotary switch...
€1.50
Ex Tax:€1.24
Model: ROTARYSWITCH2X6HOLE
A standard rotary switch with holes in the pins..
€1.50
Ex Tax:€1.24
Model: ROTARYSWITCH4X3
A standard rotary switch.
Specifications:
Maximum voltage: 30V DC
Maximum current: 0.3A
Number of poles: 4
Number of positions: 3
Lifespan: ~10000 cycles
Dimensions: See images
Package contents:
1x Rotary Switch - ..
€1.50
Ex Tax:€1.24
Model: SEEED-103020012
A high active relay module with 1 channel from Seeed Studio. By simply applying a 5V signal to the SIG pin, the relay changes state.
Specifications:
Supply voltage: 5V DC
Signal voltage: 5V
Relay:
Maximum switching voltage: 250V AC..
€12.50
Ex Tax:€10.33
Model: SEEED-103020133
A relay module from Seeed Studio with accompanying enclosure. The relays are easy to control individually via I2C.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3V
Communication: I2C
Default I2C address: 0x11 or 0x12
Relay:..
€18.50
Ex Tax:€15.29
This module consists of two push buttons. ..
€4.50
Ex Tax:€3.72
Model: SEEED-105020002
A simple LED strip driver from Seeed Studio for powering and controlling LED strips up to 5 meters. This module is "chainable", which means that multiple drivers can be connected in sequence using the IN and OUT Grove connectors.
Specifications:
..
€12.00
Ex Tax:€9.92
Model: SK12D07VG3
A switch that you can put on a printed circuit board.
This switch is very small and not suitable for high currents.
There are 3 pins available. The middle pin is connected with the pin on the side where the switch is set.
This variant is turned 90..
€0.20
Ex Tax:€0.17
Model: SWITCHPCB
A switch that you can put on a printed circuit board or breadboard.
This switch is very small and not suitable for high currents.
There are 3 pins available. The middle pin is connected with the pin on the side where the switch is placed.
Suitab..
€0.20
Ex Tax:€0.17
Model: SWITCHPCB90D
A switch that you can put on a printed circuit board or breadboard.
This switch is very small and not suitable for high currents.
There are 3 pins available. The middle pin is connected with the pin on the side where the switch is placed.
Suitab..
€0.25
Ex Tax:€0.21
Model: SWITCHS
A switch that can be build in various applications. The "I" and "O" indicate the ON and OFF position. The switch has 2 pins and is thus capable of switching 1 wire.
Suitable for 250VAC - 3A.
Dimensions: 8.5 x 13.5mm..
€0.45
Ex Tax:€0.37
Model: SWITCHN
A switch that can be build in various applications. The "I" and "O" indicate the ON and OFF position. The switch has 2 pins and is thus capable of switching 1 wire.
Suitable for 250VAC - 6A.
Dimensions: 12 x 19mm..
€0.50
Ex Tax:€0.41