Model: AB6Y-M-BLUE
A push button that can be used as a reset button. The button springs back after being pressed (no on/off switch)...
€2.50
Ex Tax:€2.07
Model: AB6Y-M-6.3V-BLUE
A push button with LED that can be used as a reset button. The button springs back after being pressed (no on/off switch). The LED is double such that the polarity does not matter, it also comes with a built-in series resistor...
€3.00
Ex Tax:€2.48
Model: BBTACT
This variant is ideal for use with a breadboard and very handy to use, because the somewhat long and straight pins.
Besides that, this button only has 2 pins, and can prevent confusion compared to the normal 4 pin verison.
Price is per piece...
€0.15
Ex Tax:€0.12
Model: SS22G08
A switch that you can build in.
Specifications:
ON-OFF switch
Suitable for 250VAC - 3A, 50VDC - 3A
Two mounting holes for M2.5 screws
See images for dimensions.
Note: The height of the plastic slider can differ from the photo. Th..
€0.60
Ex Tax:€0.50
Model: SS23F19
A switch that you can build in.
Specifications:
ON-OFF-ON switch
Suitable for 250VAC - 3A, 50VDC - 0.5A
Two mounting holes for M3 screws
See images for dimensions...
€0.60
Ex Tax:€0.50
2-4 Weeks
Model: STARTCOMPKIT
A handy component kit for starting hobbyists.
Note: No nuts and washers are supplied with the potentiometers.
Note: It may happen that only 2 LEDs of an LED color are supplied instead of 3...
€5.00
Ex Tax:€4.13
2-4 Weeks
Model: DFROBOT-SEN0235
Brand: DFRobot
A rotary encoder with 20 steps per revolution. This rotary encoder can keep rotating and does not have, like almost all potentiometers, a start and end position...
€3.50
Ex Tax:€2.89
Model: DFROBOT-DFR0144
Brand: DFRobot
A relay shield suitable for Arduino Uno (compatible) boards. In addition to the relays, this shield also has an adapter for an Xbee module and a number of servo connectors...
€15.00
Ex Tax:€12.40
Model: DFROBOT-DFR0789-B
Brand: DFRobot
This push button from DFRobot has a built-in memory circuit. Even though the button bounces back when pressed, the output signal remains high or low until the button is pressed again...
€5.00
Ex Tax:€4.13
Model: DFROBOT-DFR0789-G
Brand: DFRobot
This push button from DFRobot has a built-in memory circuit. Even though the button bounces back when pressed, the output signal remains high or low until the button is pressed again...
€5.00
Ex Tax:€4.13
Model: DFROBOT-DFR0789-R
Brand: DFRobot
This push button from DFRobot has a built-in memory circuit. Even though the button bounces back when pressed, the output signal remains high or low until the button is pressed again...
€5.00
Ex Tax:€4.13
Model: DFROBOT-DFR0789-W
Brand: DFRobot
This push button from DFRobot has a built-in memory circuit. Even though the button bounces back when pressed, the output signal remains high or low until the button is pressed again...
€5.00
Ex Tax:€4.13
Model: DFROBOT-DFR0789-Y
Brand: DFRobot
This push button from DFRobot has a built-in memory circuit. Even though the button bounces back when pressed, the output signal remains high or low until the button is pressed again...
€5.00
Ex Tax:€4.13
Model: DFROBOT-DFR0991
An I2C push button module from DFRobot, with RGB LED. Up to 8 buttons can be linked together, because of the adjustable I2C address...
€10.00
Ex Tax:€8.26
Model: DFROBOT-DFR0996
A latching relay module from DFRobot that works on both 3.3V and 5V. This relay holds its last set state, even when powered off.
Note: Due to the PCB design, this module is not safe for switching mains voltage...
€7.00
Ex Tax:€5.79
Model: DFROBOT-TEL0146
Brand: DFRobot
Note: An external power supply can be connected to easily pair the module, however the button may not be pressed at the same time to avoid damage...
€10.50
Ex Tax:€8.68
Model: DIPSWITCH2
A DIP switch is often used to change settings in hardware. The DIP switch with 8 positions is often used as a 1 byte address (8 bits) in wireless system. lingen hardwarematig aan te geven.
If the switch is up (towards "ON") the pins are connec..
€0.40
Ex Tax:€0.33
Model: DIPSWITCH4
A DIP switch is often used to change settings in hardware. The DIP switch with 8 positions is often used as a 1 byte address (8 bits) in wireless system. lingen hardwarematig aan te geven.
If the switch is up (towards "ON") the pins are connec..
€0.50
Ex Tax:€0.41
Model: DIPSWITCH8
A DIP switch is often used to change settings in hardware. The DIP switch with 8 positions is often used as a 1 byte address (8 bits) in wireless system. lingen hardwarematig aan te geven.
If the switch is up (towards "ON") the pins are connec..
€0.60
Ex Tax:€0.50
Model: MC-38
This door switch has a built-in reed relay/contact that can be switched with the supplied magnet.
This set consists of two parts: reed relay with wires and the magnet. Both are incorporated in a plastic housing that can be glued or screwed with the ..
€2.50
Ex Tax:€2.07
Model: ENDSTOPMOD
This module has a standard microswitch to detect a certain object (often used in 3D printers and CNC machines)
Specifications:
LED present (lights up when the microswitch is pressed)
The "OUT" pin is low if the microswitch is p..
€2.00
Ex Tax:€1.65
Model: PBS-110-GREEN
A push button that can be used as a reset button. The button springs back after being pressed (no on/off switch)...
€0.50
Ex Tax:€0.41
Model: PBS-33B-GREEN
A push button that can be used as a reset button. The button springs back after being pressed (no on/off switch)...
€0.65
Ex Tax:€0.54
Model: AB6Y-A-GREEN
A push button that can be used as an on/off button. After pressing the button, the button will remain in a different position (lower or higher)...
€2.50
Ex Tax:€2.07
Model: AB6Y-A-6.3V-GREEN
A push button with LED that can be used as an on/off button. After pressing the button, the button will remain in a different position (lower or higher). The LED is double such that the polarity does not matter, it also comes with a built-in series r..
€3.00
Ex Tax:€2.48
Model: AB6Y-M-GREEN
A push button that can be used as a reset button. The button springs back after being pressed (no on/off switch)...
€2.50
Ex Tax:€2.07
Model: AB6Y-M-6.3V-GREEN
A push button with LED that can be used as a reset button. The button springs back after being pressed (no on/off switch). The LED is double such that the polarity does not matter, it also comes with a built-in series resistor...
€3.00
Ex Tax:€2.48
Model: MOSFETMOD4CH
This MOSFET module based on IRF540 MOSFET makes it possible to control 4 different high-power devices.
The LEDs on the module indicate which MOSFET is switched on. This board is particularly useful for controlling a large LED strip or a motor (in ..
€6.50
Ex Tax:€5.37
Model: MOSFETMOD36V15A
With this High-Power MOSFET module you can easily use the double mosfet through the separate connections for power supply, switch pins and signal pins.
The LED on the module indicates whether the MOSFET is switched on. This board is particularly use..
€2.00
Ex Tax:€1.65