Model: 2.4GHZANTSMASMALL90
An antenna for, for example, Wi-Fi or Bluetooth.
Specifications:
Gain: 3dBi
Impedance: 50Ω
Frequency range: 2400-2500MHz
Connector: SMA male
Orientation: 90 degrees
Dimensions: 48 x 17 x 8mm
Package contents:
1x 2.4GHz A..
€2.00
Ex Tax:€1.65
Model: 2.4GHZANTSMAUFL5DBI
An antenna for, for example, Wi-Fi or Bluetooth.
Specifications:
Gain: 5dBi
Impedance: 50Ω
Frequency range: 2400-2500MHz
Connector: uFL (I-PEX) female or SMA male
Orientation: Adjustable
Dimensions: 197 x 13 x 13mm
Package con..
€2.50
Ex Tax:€2.07
Model: 2.4GHZANTUFL
Specifications:
Connector type: uFL (I-PEX)
Amplification: 3dBi
Impedance: 50 Ohm
Frequency range: 2400Mhz - 2483Mhz
Total length: 10-15cm
Note: It may be that the black cover is shorter than shown in the image, however, this does ..
€1.50
Ex Tax:€1.24
Model: 2.4GHZANTSMAUFL
Specifications:
Connector type: uFL (I-PEX)
Amplification: >3dBi
Impedance: 50 Ohm
Frequency range: 2400Mhz - 2500Mhz
Maximum input power: 50W..
€2.00
Ex Tax:€1.65
Model: 433MHZANTSMAUFL
Specifications:
Connector type: SMA & uFL (I-PEX)
Adapter cable length: 10 cm
Gain: >3 dBi
Impedance: 50 Ohm
Frequency range: 423MHz - 443MHz
Maximal input power: 50W..
€2.50
Ex Tax:€2.07
Model: 433MHZANT
This spiralwound 433Mhz antenna can perfectly send or receive a nice signal. And they are much more compact than the long monopole antennas!
Dimensions:
Length of the antenna: 20.5mm
Diameter: 5mm
Total length: 34.5mm..
€0.50
Ex Tax:€0.41
2-4 Weeks
Model: 433MHZANTSMASMALL90
Specifications:
Gain: 3dBi
Impedance: 50Ω
Frequency range: 423-443MHz
Connector: SMA male
Orientation: 90 degrees
Dimensions: 48 x 17 x 8mm
Package contents:
1x 433MHz Antenna..
€2.00
Ex Tax:€1.65
Model: 433MHZANTUFL
This spiral shaped 433Mhz antenna is built as a spring and has an uFL (I-PEX) connector.
Specifications:
Length of the antenna: 26mm
Connector type: uFL (I-PEX)
Gain: 3 dBi
Impedance: 50 Ohm
Frequency: 433MHz
Diameter: 4.2 mm..
€1.50
Ex Tax:€1.24
Model: 433MAFSTAND
You can easily control an input with the remote control and the receiver.
The remote control has 4 buttons that can control 4 outputs on the receiver.
The 12V battery for the transmitter is included. This is already in the remote control.
A red LE..
€5.00
Ex Tax:€4.13
Model: 433MKIT
Receiver module specifications:
Voltage: 5V (DC)
Static current: 4mA
Receiver Frequency: 433MHz
Receiver sensitivity: -105dB
External antenna: 32cm single-core wire, wound into a spiral
Dimensions (L x W): 30 x 14mm
Transmitter m..
€2.50
Ex Tax:€2.07
Model: 868MHZANTSMASMALL
Specifications:
Connector type: SMA (pin in the middle sticking out)
Strengthening: 2dBi
Impedance: 50 Ohm
Frequency range: 868Mhz/900Mhz/915Mhz
Length: 5cm..
€3.00
Ex Tax:€2.48
Unknown
Model: GSMMODA6
With the A6 GSM/GPRS module you can make and receive calls, send text messages* and surf the internet via GPRS with your Arduino. The module can be powered with 5V through the micro USB connection.
Specifications:
Microcontroller: A6 chip
..
€8.00
Ex Tax:€6.61
Model: ATGM336H-5N-31
A GPS module that works with UART (TX and RX) signals. The corresponding GPS antenna is included.
Specifications:
Voltage range (VCC): 5V DC
I/O Voltage: 3.3V
Standard baud rate: 9600
Uses the ATGM366H-5N-31 GPS module
Works with GPS..
€11.00
Ex Tax:€9.09
Model: AC-RX2/CS
This receiver is a lot more sensitive than the receiver from the standard 433Mhz kit that we also offer.
This way you can receive better signals from other 433Mhz transmitters.
Specifications:
Voltage: 4.5 - 5.5V DC
Power (in..
€6.50
Ex Tax:€5.37
Model: RX-4MM5/F
This receiver is a lot more sensitive than the receiver from the standard 433Mhz kit that we also offer.
This way you can receive better signals from other 433Mhz transmitters.
Specifications:
Voltage: 4.5 - 5.5V DC
Current (..
€8.00
Ex Tax:€6.61
B-Stock
Model: HM-10MODSMD
Note: This product is a B-Stock product.
B-Stock products are products that can normally no longer be sold due to a certain flaw. In this case there is nothing wrong with it, but the product is old stock, for which we can't offer support..
€4.00
Ex Tax:€3.31
Model: C2541BLE-CC41A
This bluetooth 4.0 module has a lot of functionality built inside, including sending as an iBeacon or for standard serial communication.
In addition, the software on the module can be upgraded to get more functionality. We recommend to update the so..
€8.00
Ex Tax:€6.61
Model: BT-04MOD
With this bluetooth module it is very easy to send serial data to your phone, tablet, pc or other SPP-C modules. This bluetooth module can run only in slave mode.
Specifications:
Input voltage: 3.6 - 6V
Signal voltage: 3.3V (gebruik een le..
€4.00
Ex Tax:€3.31
Model: HC-02
With this Bluetooth module you can easily send data serially to e.g. your phone, tablet or on HC-05 and HC-06 modules. This Bluetooth module can only serve as a Slave.
Specifications:
Supply voltage: 3.2 - 6V DC
Signal voltage: 3.2 - 6V DC..
€5.50
Ex Tax:€4.55
Model: HC-05
With this bluetooth module you can easily send serial data to (for example) your mobile phone, tablet or other HC-05 modules. This bluetooth module can either be used as a master or slave.
Specifications:
Power Supply voltage: 3.2 - 6V DC
..
€16.00
Ex Tax:€13.22
Model: HC-05PCB
With this bluetooth module you can easily send data serially to eg. your phone, tablet or other HC-05 modules. This bluetooth module can serve both as master and slave.
Specifications:
Supply voltage: 3.3V
Signal voltage: 3.3V (use a level..
€6.00
Ex Tax:€4.96
Unknown
Model: HC-06
With this Bluetooth module it is very easy to send data to your phone, tablet or other HC-05 modules. This module is slave only!
Specifications:
Input voltage: 3.2 - 6V DC
Signal voltage: 3.2 - 6V DC
Range: around 10m (in open ..
€8.00
Ex Tax:€6.61
Model: HC-08
With this HC-08 Bluetooth module you can easily send data serially to, for example, your phone, tablet, other HC-08 modules. This Bluetooth module can serve as Master or Slave.
Specifications:
Supply voltage: 3.2 - 6V
Signal voltage: 3.2 -..
€9.00
Ex Tax:€7.44
Model: HC-08PCB
With this Bluetooth module you can easily send data serially to for example your phone, tablet or other HC-08 modules. This Bluetooth module can serve as both Master and Slave.
Specifications:
Supply voltage: 3.3V
Signal voltage: 3.3V* (no..
€6.50
Ex Tax:€5.37
2-4 Weeks
Model: HC-42
With this HC-42 bluetooth module you can easily send data serially to, for example, your phone, tablet, other (HC-42) bluetooth modules. This bluetooth module can serve as Master and Slave.
Specifications:
Supply voltage: 3.2-6V DC
Signal ..
€9.00
Ex Tax:€7.44
Model: HC-42PCB
With this HC-42 bluetooth module you can easily send data serially to, for example, your phone, tablet, other (HC-42) bluetooth modules. This bluetooth module can serve as Master and Slave.
Specifications:
Supply voltage: 3.2-6V DC
Signal ..
€8.50
Ex Tax:€7.02
Unknown
Model: CC1101ANTSMA
An easy wireless communication module with the TI CC1101 chip that can use various bands.
Specifications:
Voltage: 1.8 - 3.6V DC
Frequency range: 387-464Mhz
Power consumption (max): <30mA
Transmission power can be adjusted up to 10m..
€5.00
Ex Tax:€4.13
Unknown
Model: CC1101ANTSMAV2.0
A convenient wireless communication module with the TI CC1101 chip that can use the various bands. The chip uses various techniques for reliable signal transmission such as CRC error detection. In addition, the module also supports RSSI signal streng..
€5.00
Ex Tax:€4.13
Unknown
Model: CC2500RFMOD
An easy wireless RF communication module with the TI CC2500 chip that can use the various bands. The module works through SPI communication.
Specifications:
Voltage: 1.8 - 3.6V DC
Effective frequency range: 2400 - 2483.5MHz
Current (max)..
€5.00
Ex Tax:€4.13
Unknown
Model: CC2500RFMOD-PCB
An easy wireless RF communication module with the TI CC2500 chip that can use the various bands. The module works through SPI communication. This RF board has a low power consumption, so it will be able to work on a power supply for a long time ..
€4.00
Ex Tax:€3.31
Model: CC2530UART
A module to send and receive UART wirelessly via 2.4Ghz Zigbee.
You can use two modules to send data or multiple modules to send/receive data to multiple modules.
Specifications:
Input voltage: 3.3-5.5 VDC
Current: <30 mA
Data rate: ..
€8.00
Ex Tax:€6.61
Model: CC2531USB-ZIGBEE
This CC2531 USB Stick is a complete ZigBee transceiver with a 9051 CPU and a USB interface in one chip. In addition, this module contains 2 buttons, 2 LEDs and 8 IO pins that can be programmed to allow sensors to work with this ZigBee module, for exa..
€7.75
Ex Tax:€6.41
Unknown
Model: XB3-24Z8UT-J
An XBee3 Zigbee 3.0 module with an uFL connector to connect an antenna (antenna is not included). Compatible with the Xbee V3 Arduino Adapter Shield to connect to an Arduino.
Specifications:
Type: XB3-24Z8UT-J
Data rate: 25..
€28.00
Ex Tax:€23.14
Model: EM4100TAG
EM4100 key tag for the RDM630 RFID reader.
Frequency: 125kHz
Color: Blue..
€0.80
Ex Tax:€0.66
New
Model: ESP32-WROOM-32E-N16
A standard WROOM module based on an ESP32 microcontroller with built-in Wi-Fi and Bluetooth...
€6.00
Ex Tax:€4.96
New
Model: ESP32-WROOM-32UE-N16
A standard WROOM module based on an ESP32 microcontroller with built-in Wi-Fi and Bluetooth...
€6.00
Ex Tax:€4.96
Model: ESP32-WROVERIPEXANT
This ESP32-WROVER WiFi module is an ESP32 based module with WiFi and Bluetooth.
This module features the ESP32 REV1 chip (240Mhz dual core processor) with 4MB SPI flash and 4MB PSRAM memory.
For more information see the datasheet under the t..
€7.00
Ex Tax:€5.79
Model: ESP32-WROVERPCBANT
This ESP32-WROVER WiFi module is an ESP32 based module with WiFi and Bluetooth.
This module features the ESP32 REV1 chip (240Mhz dual core processor) with 4MB SPI flash and 4MB PSRAM memory.
For more information see the datasheet under the t..
€5.50
Ex Tax:€4.55
Model: ESP8266-01-1M
This module offers you the possibility to connect your Arduino to WiFi for a very low price.
The ESP8266 module works with the normal UART port on your Arduino and can connect to networks, form your own network (hot spot) or both. The possibilitie..
€4.00
Ex Tax:€3.31
Model: ESP-01S
This module offers you the possibility to connect your Arduino to WiFi for a very low price. This "S" version of the ESP-01 module has minor improvements in the PCB compared to the normal ESP-01 module.
The ESP8266 module works with the normal UAR..
€4.00
Ex Tax:€3.31
Model: ESP8266-07S-4M
This ESP-07S is a version of the ESP8266 module series with 4MB memory and has an uFL connector on board for an external WiFi antenna. (this has to be purchased separately!)
This module offers you the possibility to connect your Arduino to WiFi fo..
€5.00
Ex Tax:€4.13
Model: ESP8266-12F-4M
This module offers you the possibility to connect your Arduino to WiFi for a very low price.
The ESP8266 module works with the normal UART port on your Arduino and can connect to networks, form your own network (hot spot) or both. The possibilitie..
€5.00
Ex Tax:€4.13
Model: ESP8266-12S-4M
This ESP-12S is an improved model with respect to the ESP-12F module, but is not a direct replacement in connection with the missing pins at the bottom of the module. Since these pins are not used in most cases, it is in most cases a replacement for ..
€4.50
Ex Tax:€3.72
Model: FMAMANTEXT
This FM/AM antenna is extendable and can be tilted.
In addition, it has a hole with which it can be mounted.
Dimensions:
Length of antenna (extended): ~230mm
Diameter: 6mm
For other dimensions, see the images..
€2.50
Ex Tax:€2.07