Menu
Your Cart

Unit

Model: M5STACK-U006
This is an expansion hub unit for multiple Grove connections for M5Stack. Note: Data transfer when connecting multiple I2C slave units/modules with the same address can cause problems...
€5.50
Ex Tax:€4.55
Model: M5STACK-U131
..
€9.00
Ex Tax:€7.44
Model: M5STACK-U003
This is a LED module with 3 RGB LEDs  and a Grove connection for the M5Stack.  Specifications: 3 Individually programmable RGB LEDs 2x LEGO® compatible holes 2x Grove connection (1x Grove cable included) Package conten..
€4.00
Ex Tax:€3.31
Model: M5STACK-U097
A relay module for M5Stack products. Specifications: Relay: Maximum switching voltage: 250V AC or 28V DC Maximum switching current: Resistive load: 10A Number of channels: 4 Communication: I2C I2C ad..
€12.00
Ex Tax:€9.92
Model: M5STACK-U125
This is a buck converter module with a DC jack and a Grove connection from M5Stack. Specifications: Input voltage: 6 - 24V DC Output voltage: 5V DC Maximum output current: 1A Chip: ME3116AM6G Type: Non-isolated buck (step-down) Con..
€5.50
Ex Tax:€4.55
Model: M5STACK-U095
This is a 6-axis module with 3-axis accelerometer, 3-axis gyroscope and a Grove connection for M5Stack. The module works via I2C communication. Specifications: Sensor: MPU6886 Gyroscope: 3-axis (x, y, z) Accelerometer: 3-axis (x, y,..
€11.00
Ex Tax:€9.09
Model: M5STACK-U056
This is a 3-axis accelerometer module with a Grove connection for M5Stack. The module works via I2C communication. Specifications: Sensor: ADXL345 3-axis (x, y, z) Resolution: 13-bit Measurements up to ±16g I2C address: 0..
€6.00
Ex Tax:€4.96
Model: M5STACK-U013
This is a module with a 16-bit analog to digital converter for M5Stack. The module works via I2C communication. Specifications: Measuring voltage range: 0~12VDC Chip: ADS1100 Resolution: 16-bit I2C address: 0x48 2x LEGO® compatib..
€6.00
Ex Tax:€4.96
Model: M5STACK-U078
The AI Camera Unit-V is a camera module that runs on a Kendryte K210 chipset. The board has a 64-bit dual-core RISC-V CPU along with an OV2640 on board, which makes for good photos in low light and the ability to combine this with Machine Vision (AI ..
€20.00
Ex Tax:€16.53
Model: M5STACK-U078-D
The AI Camera Unit-V is a Linux-based camera module that runs on a Sigmstar SSD202D chipset. The board has a 32-bit dual-core Cortex-A7 CPU along with a GC2145 camera sensor on board. Together, this makes for great low-light photos and the ability to..
€80.00
Ex Tax:€66.12
Model: M5STACK-U086
This is an isolated current sensor module with a Grove connection for M5Stack. The module contains a 16-bit ADC (analog to digital) converter, namely the ADS1115. The sensor is factory calibrated with the calibration data stored in the built-in EEPRO..
€12.00
Ex Tax:€9.92
Model: M5STACK-U005
This is a potentiometer unit with a Grove connection for the M5Stack.  Specifications: Output voltage range: 0~2.5V 2x LEGO® compatible holes 1x Grove connection (1x Grove cable included) Package content: 1x Potentiom..
€4.00
Ex Tax:€3.31
Model: M5STACK-U090
This is a barometric air pressure sensor module with a Grove connection for M5Stack. The module works via I2C communication. Specifications: Sensor: BMP280 Measuring range air pressure: 300-1100hPa Air pressure resolution: 0.16hPa ..
€6.00
Ex Tax:€4.96
Model: M5STACK-U027
The Button Unit is a pushbutton module from M5Stack.  Specifications: Pushbutton 2x LEGO® compatible holes 1x Grove interface Package content: 1x M5Stack Button Unit 1x Grove cable For more information, see:&nb..
€3.50
Ex Tax:€2.89
Model: M5STACK-U132
..
€7.50
Ex Tax:€6.20
Model: M5STACK-U085
This is a CANBus module with a HY2.0 4P (Grove) connection for M5Stack. The module works via UART communication. Specifications: CAN Bus chip: CA-IS3050G Maximum number of bus nodes: 110 Maximum transfer speed: 1Mbps Se..
€13.00
Ex Tax:€10.74
Model: M5STACK-U035
The M5Stack CardKB Unit is a keyboard module with a Grove connection for M5Stack. The module works via I2C communication. Specifications: I2C communication I2C address: 0x5F Multi-key support 2x LEGO® compatible holes 1x Grove co..
€6.50
Ex Tax:€5.37
Model: M5STACK-U102
The Catch Unit is a robotic gripper from M5STACK. With a single servo and a gear mechanism, both arms of the gripper are moved. The unit has several places with which it can be attached to LEGO®. Specifications: Supply voltage: 4.2-6V DC..
€6.00
Ex Tax:€4.96
Model: M5STACK-U120
This Color LCD Unit is a display module from M5Stack. The module contains a separate microcontroller that controls the display. This microcontroller can then be controlled via I2C in order to control the display. The software of the microcontroller c..
€19.00
Ex Tax:€15.70
Model: M5STACK-U009
The M5Stack Color Unit is an RGB color sensor module for M5Stack. The module works via I2C communication. Specifications: Sensor: TCS3472 I2C address: 0x29 2x LEGO® holes for mounting Grove connection Package contents: 1x Co..
€12.50
Ex Tax:€10.33
Model: M5STACK-U012
This is a 12-bit DAC module for M5Stack. The module works via I2C communication. Specifications: Output voltage: 0~3.3V Resolution: 12 bit DAC Chip: MCP4725 I2C address: 0x60 2x LEGO<sup>&reg;</sup> compatible holes ..
€5.50
Ex Tax:€4.55
Model: M5STACK-U105
This is a DDS (Direct Digital Synthesizer) signal generator module with a Grove connection from M5Stack. This unit uses the AD9833 chip with which a certain desired signal can be generated. Specifications: Chip: AD9833 Signal output amplit..
€30.00
Ex Tax:€24.79
Model: M5STACK-U109-X
This is a DIY camera kit from M5Stack, with which the M5Stack CameraX module or M5Stack CameraF module can be built. This kit contains both the lens for the CameraX and CameraF module, and you can choose which lens is installed. The Unit is based on ..
€22.00
Ex Tax:€18.18
Model: M5STACK-U025
The Dual-Button Unit is a button module from M5Stack. It has a blue and a red pushbutton.  Specifications: 1x Blue pushbutton 1x Red pushbutton 2x LEGO® holes for mounting 1x Grove interface Package contents: 1x Dual-Bu..
€4.75
Ex Tax:€3.93
Model: M5STACK-U019
This is a module with a soil moisture sensor for M5Stack. Specifications: Analog and digital output (high/low) Type of soil moisture sensor: Resistive Adjustable threshold value for digital output via potentiometer 2x LEGO® compati..
€4.00
Ex Tax:€3.31
Model: M5STACK-U135
..
€8.50
Ex Tax:€7.02
Model: M5STACK-U001-C
The ENV III Unit is an upgrade of the ENV II and ENV Unit. This module has a temperature, humidity and air pressure sensor with a Grove connection for M5Stack. The difference between the ENV III Unit and the ENV II Unit is that this one uses the Q..
€8.00
Ex Tax:€6.61
Model: M5STACK-U007
This is a camera module based on an ESP32 and OV2640 chipset. The module has built-in WiFi and Bluetooth. The board can be powered and programmed via the USB-C connection. Specifications: ESP32 Chip: 240MHz dual core, 512KB SRAM, 4MB flash ..
€15.00
Ex Tax:€12.40
Model: M5STACK-U011
This is a pin extender module with a Grove connection for M5Stack. The module works via I2C communication.  Specifications: Chip: PCA9554PW Number of additional IO pins: 8 I2C address: 0x27 2x LEGO® compatible holes 1x Grove..
€4.00
Ex Tax:€3.31
Model: M5STACK-U063
This is a motor module with a small propeller and Grove connection for the M5Stack.  Specifications: Motor: N20 motor, 5VDC Max. speed: 8800RPM 2x LEGO® compatible holes 1x Grove connection (1x Grove cable included) Package c..
€6.50
Ex Tax:€5.37
Model: M5STACK-U008
The M5Stack Finger Print Unit is a fingerprint sensor module with built-in FPC1020A.  Specifications: Built-in FPC1020A sensor 2x LEGO® holes for mounting Grove interface UART communication UART settings: Baudrate: 19200bp..
€22.00
Ex Tax:€18.18
Model: M5STACK-U127
A hand gesture recognition sensor from M5Stack. With this you can easily recognize 9 different gestures. Specifications: Supply voltage: 5V DC Signal voltage: 3.3V Communication: I2C I2C address: 0x73 Gesture Recognition Se..
€17.00
Ex Tax:€14.05
Model: M5STACK-U032
This is a GPS module with a Grove connection for M5Stack. The module works via UART communication.  Specifications: AT6558 Navigation chip Position accuracy: 2.5m Position refresh rate: 1-10Hz Maximum height: 1800m Maximu..
€14.25
Ex Tax:€11.78
Model: M5STACK-U084
This is a Hall Effect module with a Grove connection for M5Stack. The module works via a GPIO port with which the status of the sensor can be read. Also, an LED indicates the status of the sensor. Specifications: Hall Sensor: A3144E 2x LEG..
€7.00
Ex Tax:€5.79
Model: M5STACK-U029
The M5Stack Heart Rate Unit is a heart rate sensor module. The Heart Rate Unit has a built-in MAX30100 sensor that measures heart rate through a finger.  Specifications: Built-in MAX30100 sensor 2x LEGO® holes for mounting Grove int..
€10.00
Ex Tax:€8.26
Model: M5STACK-A045
The M5STACK HEX Unit is a hexagon RGD LED panel. In total there are 37 RGB LEDs on this panel (for the LED index, see images). With an input and output port on the back of the module, it is possible to daisy chain several of these modules. Specifi..
€10.00
Ex Tax:€8.26
Model: M5STACK-U052
The HMI (Human Machine Interface) Unit Kit is a package consisting of four different M5Stack Units: Package Contents: 1x Dual-Button Unit 1x Button Unit 1x Joystick Unit 1x CardKB Unit See the links above for m..
€20.50
Ex Tax:€16.94
Model: M5STACK-U124
This ID Unit from M5Stack is a "crypto coprocessor". This module is, for example, suitable for data encryption and device authentication. Each ATECC608B chip comes with a unique 72-bit serial number and various security features to prevent cyber-atta..
€8.50
Ex Tax:€7.02
Model: M5STACK-U051
The IO Unit Kit is a package consisting of seven different M5Stack Units: Package Contents: 1x EXT.IO Unit 1x Proto Unit 1x Relay Unit 1x 3.96 Unit 1x RS485 Unit 1x DAC Unit 1x ADC Unit See the links above for more in..
€24.50
Ex Tax:€20.25
Model: M5STACK-U002
This is an infrared module with a Grove connection for the M5Stack. With this module you can send and receive infrared signals. Specifications: 1x Infrared receiver 1x Infrared sender Range: <5m 2x LEGO® compatible holes 1x Gr..
€5.00
Ex Tax:€4.13
Model: M5STACK-U094
This is an Isolated RS485 module with a Grove connection for M5Stack. This module converts TTL level to RS485 level. The module works via UART communication. Specifications: Max signal transmission rate: 500Kbps Supports up to 256 devices ..
€10.50
Ex Tax:€8.68
Model: M5STACK-U024
This M5Stack Joystick Unit can be used as a robot or game controller.  Specifications: Atmega 328P microcontroller 2x LEGO® mounting holes Programmable with Arduino and UIFlow (Blockly, Python) 1x Grove connection (1x Grove cable ..
€6.50
Ex Tax:€5.37
M5STACK Kmeter Unit - Thermocouple Temperature Sensor
New
Model: M5STACK-U065
This is a laser receiver module with Grove connection for the M5Stack.  This works together with the M5Stack Laser TX Unit. Specifications: Wavelength receiver: 650nm 2x LEGO® compatible holes 1x Grove connection (1x Grove cabl..
€6.00
Ex Tax:€4.96
Model: M5STACK-U066
This is a laser module with a Grove connection for the M5Stack.  This unit works in together with the M5Stack Laser RX Unit. Specifications: Wavelength: 650nm Power: 5mW 2x LEGO® compatible holes 1x Grove connection (1x Grove..
€5.00
Ex Tax:€4.13
Model: M5STACK-U021
This is a module with an LDR sensor for M5Stack. Specifications: LM393 LDR sensor Adjustable digital output via potentiometer 2x LEGO® compatible holes 1x Grove connection (1x Grove cable included) Package content: 1x Light ..
€5.50
Ex Tax:€4.55
Model: M5STACK-K027
An AIOT (AI + IOT) camera with a Kendryte K210 processor on board. This is a 64-bit dual-core RISC-V CPU together with an OmniVision OV7740 on board. Together this ensures good photo's in low light and the possibility to combine this with Machine Vis..
€48.00
Ex Tax:€39.67
Model: M5STACK-U096
This is a microphone module with a Grove connection for M5Stack. The MIC Unit has a built-in MAX4466 amplifier. The module can be read both with an analog and a digital pin (sound/no sound). Specifications: Built-in microphone amplifier: MAX..
€5.50
Ex Tax:€4.55
Model: M5STACK-U064
This is a module with a small prototyping board and a Grove connection for M5Stack.  Specifications: Circuit board: 40 holes Pin distance: 2.54mm 2x LEGO® compatible holes 1x Grove connection (1x Grove cable included) Package..
€3.00
Ex Tax:€2.48
Model: M5STACK-U028
The NCIR Unit is a temperature sensor module from M5Stack. This module has a built-in MLX90614 infrared sensor (IR) that is able to measure the temperature of various objects, including the human body.  Specifications: Input voltage: 4...
€21.00
Ex Tax:€17.36
Showing 1 to 50 of 75 (2 Pages)
1
false
true
true
Remove
Change
tr