Model: PROMINI3.3V8M
This Pro Mini 3.3V is based on the open source design of Arduino and is a copy of the SparkFun Pro Mini 3.3V, making it both hardware and software compatible with the Arduino ecosystem. The Pro Mini 3.3V is a very compact board, with an ATmega328P mi..
€7.50
Ex Tax:€6.20
Model: PROMINI5V16M
This Pro Mini 5V is based on the open source design of Arduino and is a copy of the SparkFun Pro Mini 5V, making it both hardware and software compatible with the Arduino ecosystem. The Pro Mini 5V is a very compact board, with an ATmega328P microcon..
€6.00
Ex Tax:€4.96
Model: PYCSIPY
With the Pycom SiPy, you have a small MicroPython based IoT development platform with WiFi, Bluetooth and Sigfox. With a Wi-Fi range up to 1km in combination with the ESP32 Wi-Fi chip from Espressif offers many possibilities for IoT applications.
Wi..
€33.00
Ex Tax:€27.27
Model: FANPDCTRL
A development board based on an ESP32-S3 (with Wi-Fi and Bluetooth), which is specially made to use with the Universal Fan Mount for Radiators to easily switch the fans on and off. Unique to this module is the built-in USB PD (USB Power Delivery) tri..
€15.75
Ex Tax:€13.02
Model: RA-RM650
An AI accelerator, or Neural Processing Unit (NPU), module from Radxa...
€122.00
Ex Tax:€100.83
Model: RA015
An M.2 adapter board for the Radxa Rock 5A. This allows you to easily connect an SSD, for example...
€12.00
Ex Tax:€9.92
Model: RS140-D4J0S0R35W28
Note: This is the version without SPI flash, but with eMMC support...
€52.00
Ex Tax:€42.98
Note: This is the version without eMMC support, but with SPI bootloader flash...
€68.00
Ex Tax:€56.20
Model: RS140-D8J0S0R35W28
Note: This is the version without SPI flash, but with eMMC support...
€74.50
Ex Tax:€61.57
Model: RAK-A15055
The Helium Mapper Kit from RAKwireless makes it easier for users to map the Helium network and monitor coverage. The kit includes the following products:
RAK4631
RAK19007
RAK1904
RAK12500
RAK910396
USB cable..
€81.00
Ex Tax:€66.94
Model: RAK-115004
The RAK13300 is a LoRa/LoRaWAN communication module from RAKwireless for the modular WisBlock platform, based on the RP2040 microcontroller and the SX1262 LoRa transceiver...
€12.50
Ex Tax:€10.33
Model: RAK-100029
An adapter module from RAKwireless for the modular WisBlock system with standard male pin headers...
€8.75
Ex Tax:€7.23
Model: RAK-110075
An adapter module from RAKwireless for the modular WisBlock system with a connector for a standard QWIIC (=STEMMA QT/JST-SH) interface...
€3.75
Ex Tax:€3.10
Model: RAK-110081
A base module from RAKwireless for the modular WisBlock platform. This module connects a WisBlock Core, 2 IO slots and up to 6 WisBlock sensor modules. Furthermore, it is also possible to connect a battery and a solar panel to the Base module...
€19.00
Ex Tax:€15.70
Model: RAK-110035
A base module from RAKwireless for the modular WisBlock platform. The WisBlock Mini Base board connects a WisBlock Core and up to 2 WisBlock Modules. Furthermore, it is also possible to connect a battery and a solar panel to the Base module...
€10.00
Ex Tax:€8.26
Model: RAK-110082
A base module from RAKwireless for the modular WisBlock platform...
€12.75
Ex Tax:€10.54
Model: RAK-110085
A base module from RAKwireless for the modular WisBlock platform. The WisBlock Mini Base board connects a WisBlock Core and up to 2 WisBlock Modules. This version has a power slot, making the module flexible in terms of power supply options.
Note:..
€9.25
Ex Tax:€7.64
Model: RAK-110086
A base module from RAKwireless for the modular WisBlock platform. This version has a power slot, making the module flexible in terms of power supply options...
€10.25
Ex Tax:€8.47
Model: RAK-110087
A base module from RAKwireless for the modular WisBlock platform. This module connects a WisBlock Core, 2 IO slots and up to 6 WisBlock sensor modules. This version also has a power slot which makes the module flexible in terms of power supply option..
€11.00
Ex Tax:€9.09
Model: RAK-115233
The RAK3312 is a LoRa/LoRaWAN core module from RAKwireless for the modular WisBlock platform, based on the ESP32-S3...
€14.75
Ex Tax:€12.19
Model: RAK-115012
The RAK13300 is a LoRa/LoRaWAN core module from RAKwireless for the modular WisBlock platform, based on the STM32WLE5CCU6...
€11.50
Ex Tax:€9.50
Model: RAK-115000
The RAK4631 is a module from RAKwireless for the modular WisBlock platform. This Core module is based on the nRF52840 and SX1262 chips. The module supports BLE 5.0 and LoRa...
€18.50
Ex Tax:€15.29
Model: RAMPS1.4
The RAMPS 1.4 control board is suitable to use in combination with an Arduino Mega and a maximum of five stepper drivers.
This board is mainly used for 3D printers.
The jumpers for the motor driver settings are included and the board is fully ass..
€5.50
Ex Tax:€4.55
Model: RPIGPIOEXTBOARDKIT
A GPIO extension kit so you can easily use the Raspberry Pi pins on a breadboard.
The GPIO Extension Board has the pins in the same order as the Raspberry Pi and has pin indications on the GPIO extension board.
The kit consists of a 40-cm cable t..
€4.50
Ex Tax:€3.72
Model: RPI-CM4104032
The Raspberry Pi Compute Module 4 packs the power of the Raspberry Pi 4 into a compact form for embedded applications, featuring a quad-core ARM Cortex-A72 processor, dual video output, and versatile interfaces...
€85.00
Ex Tax:€70.25
Model: RPIPICO
This is the original Raspberry Pi Pico. This is a completely different product from Raspberry Pi than everyone is used to. The Pico is a microcontroller, while for example, the Raspberry Pi 4 and Zero are microcomputers. This module can be programmed..
€5.50
Ex Tax:€4.55
Model: RPIPICO2
This is the original Raspberry Pi Pico 2. This development board is based on the RP2350 microcontroller which is the successor of the RP2040 from the first Raspberry Pi pico. That makes this board faster and more efficient...
€7.25
Ex Tax:€5.99
Model: RPIPICO2W
This is the original Raspberry Pi Pico 2. This development board is based on the RP2350 microcontroller which is the successor of the RP2040 from the first Raspberry Pi pico. That makes this board faster and more efficient. This W variant also has Wi..
€9.25
Ex Tax:€7.64
Model: RPIPICOH
This is the original Raspberry Pi Pico H. This variant of the Pico has soldered headers and a 3-pin connector for debugging. This is a completely different product from Raspberry Pi than everyone is used to. The Pico is a microcontroller, while, for ..
€6.50
Ex Tax:€5.37
Model: RPIPICOW
This is the original Raspberry Pi Pico W. This is a completely different product from Raspberry Pi than everyone is used to. The Pico W is a microcontroller, while for example, the Raspberry Pi 4 and Zero are microcomputers. This module can be progra..
€8.50
Ex Tax:€7.02
Model: WS-23289
Brand: Waveshare
This is the original Raspberry Pi Pico W with soldered headers by Waveshare. This is a completely different product from Raspberry Pi than everyone is used to. The Pico W is a microcontroller, while for example, the Raspberry Pi 4 and Zero are microc..
€11.50
Ex Tax:€9.50
Model: RPIPICOWH
This is the original Raspberry Pi Pico WH. This module can be programmed in MicroPython, Arduino and other C/C++ languages. Compared to the normal Raspberry Pi Pico, this Pico W(ireless) also has built-in Wi-Fi and Bluetooth, making it ideal for IoT ..
€9.25
Ex Tax:€7.64
Model: RPISENSEHATV2
The Sense HAT is an extensive module with numerous sensors made for a Raspberry Pi single board computer (SBC). This V2 version has an additional light (color) sensor.
Note: Because the PCB becomes warm, the temperature sensors will not accurately..
€39.75
Ex Tax:€32.85
Model: RFNANOV3.0-NRF24L01
An Arduino Nano compatible board with a built-in NRF24L01 RF module.
Specifications:
Supply voltage:
USB-C: 5V DC
VIN pin: 7-12V DC
GPIO voltage: 5V
Maximum GPIO current: 40mA
Processor: ATmega328
Clock Frequency: ..
€10.25
Ex Tax:€8.47
Model: RP2040SMEXP
RP2040 SuperMini Expansion Board is an expansion board specially designed for RP2040 SuperMini Development Board. In addition to the convenient pins, the module also has a battery charger.
Note: No RP2040 SuperMini is included...
€4.50
Ex Tax:€3.72
Model: SCREWSHIELDMEGASOLD
With this Screw Shield you can easily screw the wires to the pins on Mega-layout compatible boards.
All available pins on the screw terminals have a pin description on the PCB.
Dimensions: 120 x 77 x 11mm (height measured from bottom of PCB to to..
€10.25
Ex Tax:€8.47