Model: M5STACK-A014
Brand: M5Stack
The M5Stack M5GO Bottom is an upgrade to the standard bottom of the M5Core and M5Fire. The M5GO Bottom has a built-in 500mAh Li-Po battery, an analog microphone, a PORT B (GPIO) and PORT C (UART), LED Bar and more. The module is easily charged w..
€14.50
Ex Tax:€11.98
Model: M5STACK-A014-C
Brand: M5Stack
The M5Stack M5GO Bottom2 is an extension for the M5Core2. The M5GO Bottom2 includes a built-in battery, microphone, gyroscope/accelerometer, Grove expansion ports and an LED Bar. The module is easy to charge with a M5GO Charger Base (is not included)..
€16.25
Ex Tax:€13.43
Model: M5STACK-A014-D
Brand: M5Stack
The M5Stack M5GO Bottom3 is an extension for the M5Core3. The M5GO Bottom3 includes a built-in battery, infrared transmitter, Grove expansion ports and two LED Bars. The module is easy to charge with a M5GO Charger Base (this is not included) or via ..
€11.50
Ex Tax:€9.50
Model: M5STACK-A016
Brand: M5Stack
The M5GO Charger Base is a charging platform with a POGO pin charging connector for the M5GO Bottom and the M5Fire.
Specifications:
Input interface: USB-C
Output interface: POGO pins
4 Built-in magnets for fixation
Dimensions: 54...
€9.50
Ex Tax:€7.85
Model: M5STACK-M028
Brand: M5Stack
The M5Stack NB-IoT is a wireless communication module for the M5Core*. The module is based on an M5311 chipset from China Mobile and allows communication via mobile networks.
Specifications:
M5311 chipset
Supported frequency bands:
8..
€19.50
Ex Tax:€16.12
Model: M5STACK-M036
Brand: M5Stack
A ODrive motor driver module from M5Stack. This module is based on the open source motion control solution ODrive. The module can drive a single three-fase brushless motor with encoder (also like a servo motor).
Note: No motor or encoder is includ..
€49.50
Ex Tax:€40.91
Model: M5STACK-K011-B
Brand: M5Stack
This is an prototype module for the M5Core with a blank circuit board, power input and mounting options for wall mounting or DIN rails.
This circuit board is specifically intended for the M5Stack Core and can be installed as an extra layer on it. ..
€12.50
Ex Tax:€10.33
Model: M5STACK-K011-B-V11
Brand: M5Stack
The M5Stack PLC Proto Industrial Board Module V1.1 is an M5Stack base with a flexible layout and support for 9-24V input voltage. Besides this the proto board can also be attached to a 35mm din-rail with the included rail clip. ..
€13.25
Ex Tax:€10.95
Model: M5STACK-K023-B
Brand: M5Stack
This kit consists of an M5Stack Basic with pedestal and a PM2.5 Base module. This module consists of a PMSA003 laser dust sensor. The supplied pedestal contains a SHT30 temperature and humidity sensor...
€66.00
Ex Tax:€54.55
Model: M5STACK-M134
Brand: M5Stack
The PM2.5 air quality module from M5Stack with a PMSA003 laser dust sensor...
€32.75
Ex Tax:€27.07
Model: M5STACK-M137
Brand: M5Stack
This is a programmable power supply (PPS) from M5Stack made for the M5Core series. Both the output voltage and output current can be set and read back. The module is calibrated from the factory and comes with a calibration report...
€29.00
Ex Tax:€23.97
Model: M5STACK-M032
Brand: M5Stack
This is a prototype module with a height of 13.2mm for the M5Stack ESP32 Core and Core 2 with a blank printed circuit board, header pins and other connectors that connect the M5Stack Core. These headers are not connected to pins on the PCB.
This c..
€7.00
Ex Tax:€5.79
Model: M5STACK-A002
An experiment PCB module for the M5Core...
€2.50
Ex Tax:€2.07
Model: M5STACK-M001
Brand: M5Stack
This is a prototype module for the M5Stack ESP32 Core with a blank circuit board and header pins that connect the M5Stack Core. These headers are not connected to pins on the circuit board.
This board is specifically intended for the M5Stack Core ..
€6.25
Ex Tax:€5.17
Model: M5STACK-M145
Brand: M5Stack
The QR Code Scanner Module 13.2 from M5Stack is used for scanning 1D and 2D barcodes. It features an integrated buzzer and a toggle switch to select between UART and USB communication interfaces...
€21.50
Ex Tax:€17.77
Model: M5STACK-M125
Brand: M5Stack
A module from M5Stack with RCA connectors that can drive a composite video display including stereo audio. The module also has a built-in voltage converter with which the entire system can be supplied with a voltage between 9-24V DC. The module also ..
€15.00
Ex Tax:€12.40
Model: M5STACK-M130
An RS232 module from M5Stack. The module has two built-in DIP switches with which different GPIO pins of the M5Score can be selected for both the TX and RX pin...
€27.00
Ex Tax:€22.31
Model: M5STACK-M131
An RS232 module from M5Stack. The module has two built-in DIP switches with which different GPIO pins of the M5Score can be selected for both the TX and RX pin...
€27.50
Ex Tax:€22.73
Model: M5STACK-M014-B
Brand: M5Stack
This is a servo driver module for the M5Core that can control up to 16 different servo motors. The module has a built-in voltage converter that brings the input voltage to the correct servo voltage.
Specifications:
Input voltage: 6-12V DC (v..
€16.25
Ex Tax:€13.43
Model: M5STACK-M039-V11
This is a stepper motor module from M5Stack for the M5Core with three HR8825 stepper motor drivers and the option to connect four limit switches. This module has adjustable current per driver and supports microstepping. The module communicates via I2..
€25.75
Ex Tax:€21.28
Model: M5STACK-K119
The M5Stack Thermalonline Cat-M is an advanced industrial solution designed for remote temperature monitoring thanks to the MLX90640 IR thermal sensor. Data can be read from outside by the built-in telecom module.
Note: There is no power supply in..
€156.25
Ex Tax:€129.13
Model: M5STACK-K034
Brand: M5Stack
The M5Stack TOUGH is a development kit based on an ESP32 chipset. It has, among other things, a built-in display with touchscreen, Wi-Fi, Bluetooth, a speaker and an RTC. The programming languages UIFlow, MicroPython and Arduino are supported. The M5..
€57.25
Ex Tax:€47.31
Model: M5STACK-M020
Brand: M5Stack
The M5Stack USB Module is an expansion for the M5Core. This module adds a USB-port (type A), 10 GPIO pins and 2 power outputs each for 3.3V and 5V to the M5Core.
Specifications:
For use with the M5Core
MAX3421E Peripheral/Host Contro..
€15.25
Ex Tax:€12.60
Model: M5STACK-M020-V12
Brand: M5Stack
The M5Stack USB Module is an extension for the M5Core based on the MAX3421E. This module expands the M5Core with a USB port (type A) and extra GPIO pins...
€14.50
Ex Tax:€11.98