Menu
Your Cart

Sensors

Model: TCRT5000MOD1X
With this module you can detect the proximity of an object or follow a black line using infrared light. This module works based on reflection of infrared light. When following a line, the black line ..
€2.00
Ex Tax:€1.65
Model: 3144HALL
This hall sensor is the compatible version of the A3144 hall sensor from Allegro. You can therefore use the following datasheet: A3144 Datasheet..
€0.30
Ex Tax:€0.25
Model: TCRT5000MOD3X
With this module you can detect the proximity of an object or follow a black line using infrared light. This module works based on reflection of infrared light. When following a line, the black line ..
€4.50
Ex Tax:€3.72
Model: TCRT5000MOD5X
With this module you can detect the proximity of an object or follow a black line using infrared light. This module works based on reflection of infrared light. When following a line, the black line ..
€7.00
Ex Tax:€5.79
Model: HY-S301
With this module you can follow a black line by using infrared light. This module works based on the reflection of infrared light. When following a line, the black line must therefore be able to abso..
€4.50
Ex Tax:€3.72
Model: MIR-3.0Y
With this module you can follow a black line by using infrared light. This module works based on the reflection of infrared light. When following a line, the black line must therefore be able to abso..
€6.00
Ex Tax:€4.96
Model: SCT013-000
Current clamp for AC voltage. The output of the sensor is a current related to input AC current (100A:0.05A ratio). Specifications: Input current: 0-100 A Output current: 0-50 mA  Ma..
€7.00
Ex Tax:€5.79
Model: SCT013-000V
Current clamp for AC voltage .  Specifications: Input current: 0-100 A Output voltage: 0-1 V Maximum suitable cable diameter: 13 mm For more information see the datasheet under ..
€7.00
Ex Tax:€5.79
Model: SCT013-030
Current clamp for AC voltage .  Specifications: Input current: 0-30 A Output voltage: 0-1 V Maximum suitable cable diameter: 13 mm For more information see the datasheet under t..
€7.00
Ex Tax:€5.79
Model: ADS1115
This module works through I2C and gives your system the possibility to measure voltages in high accuracy. As many as 16 bits accurate! In addition, the module has a built-in amplifier that can be pro..
€5.50
Ex Tax:€4.55
Model: ADXL345V2
The ADXL345 is a small, low power, 3-axis accelerometer with high resolution (13-bit) measurements of up to ±16 g. Specifications: Chip: ADXL345 Supply voltage: 3.3-5V DC Signal volt..
€3.50
Ex Tax:€2.89
Model: AM2301
The AM2301 is a very accurate temperature and humidity sensor. The sensor is a lot more accurate than the DHT11, and comparable to the DHT22. The sensor is relatively large, but this makes it easier t..
€7.00
Ex Tax:€5.79
Model: AM2315
A temperature and humidity sensor that communicates via I2C. See the datasheet under the tab "Downloads" for all specifications...
€20.00
Ex Tax:€16.53
Model: AM2320
A handy temperature sensor and humidity sensor. Specifications: Voltage range: 3.1 - 5.5V DC Humidity measurement range: 0% ~ 99.9% RH (resolution of 0.1%) Measuring range temperature: -4..
€3.00
Ex Tax:€2.48
B-STOCK - ADS1115 (ADS1015) ADC I2C Module - see description
B-Stock
Model: ADS1115-ADS1015
*NOTE: This product is a B-Stock variant of our ADS1115* B-Stock products are products that can normally no longer be sold due to a certain flaw. In this case it is stated on the board (and on the ..
€1.00
Ex Tax:€0.83
Model: HXD-2801
A so-called ball switch can easily be used to see if something is tilted or not. This ball switch ensures that you have contact between the pins at an angle of 45 degrees or more. (see images) The m..
€0.40
Ex Tax:€0.33
Model: SW-520DMOD
This module can detect a specific tilt of the module itself. The golden component is a ball switch. The balls in the module ensure contact at a certain angle. The sensitivity can practically not ..
€2.00
Ex Tax:€1.65
Model: BH1750FVI
This light sensor has a large range en can be used (for example) to adjust the backlight of an LCD screen by measuring the available lighting. This module has a sensing range form 1 - 65535 lx. Sp..
€3.50
Ex Tax:€2.89
Model: BME280MOD
A very compact barometer that works with I2C or SPI. The BME280 is an 3-in-1 module that can measure temperature, pressure and humidity. For more information see the datasheet under the tab "Downlo..
€11.50
Ex Tax:€9.50
Model: BME280LVLCNV
A very compact barometer that works with I2C. The BME280 is an 3-in-1 module that can measure temperature pressure and humidty For more information see the datasheet under the tab "Downloads". T..
€11.50
Ex Tax:€9.50
Model: BMP180
A very compact barometer that works with I2C. The BMP180 is the better successor of the BMP085. The module can be supplied through the VCC pin with 3.3V or 5V. It also has a 3.3V output ("3.3" pin)..
€4.00
Ex Tax:€3.31
Model: BMP280
A very compact barometer that works via I2C or SPI. The BMP280 is the better successor to the BMP180 with buildin temperature sensor and pressure sensor. For more information see the datasheet unde..
€4.00
Ex Tax:€3.31
Model: SOILMOISWCABLE
With this sensor you measure the humidity of the soil. The sensor distinguishes itself from other soil moisture sensors by the capacitive measurement instead of a resistance measurement. This makes th..
€4.00
Ex Tax:€3.31
Model: SOILMOISBUZZ
Independent soil moisture sensor with built-in buzzer that gives a warning when the humidity is low. The sensor distinguishes itself from other soil moisture sensors by the capacitive measurement i..
€4.50
Ex Tax:€3.72
Model: CCS811MOD
The CCS811 module is a digital gas sensor with metal oxide (MOX) gas sensor to measure "Volatile Organic Compounds" (VOCs) from the air. This sensor is intended for indoor use in combinatio..
€12.00
Ex Tax:€9.92
Model: CCS811HDC1080MOD
This module contains a CCS811 digital gas sensor and an HDC1080 humidity and temperature sensor. This sensor module is intended for indoor use in combination with a microcontroller via an I2C interfac..
€13.00
Ex Tax:€10.74
Chirp! Capacitive Soil Moisture Sensor with Cable - I2C
New
Model: CHIRP!I2CWCABLE
This is the I2C variant of the Chirp! Plant Watering Alarm. This variant has no buzzer, but can be read out via I2C. Examples are available for Arduino and Raspberry Pi, among others. The sensor di..
€13.50
Ex Tax:€11.16
Chirp! Plant Watering Alarm - Capacitive Soil Moisture Sensor with Buzzer
New
Model: CHIRP!BUZZER
An independent soil moisture sensor from Chirp! with built-in buzzer that gives a warning (chirp) when the soil moisture level is low. The threshold of the moisture level can be set with the button. T..
€14.00
Ex Tax:€11.57
CZN-15E Electret Condenser Microphone
New
Model: CZN-15E
An omnidirectional electret condenser microphone. Specifications: Supply voltage: 1.5 - 10V DC Frequency range: 20 - 16000Hz Sensitivity: ~-52dB Output impedance: 2.2kΩ Pinafstand: 2...
€0.50
Ex Tax:€0.41
Model: DHT11
A handy temperature and humidity sensor.Specifications: Measurement range Humidity: 20% - 90% RH (0-50 °C temperature compensation) Measurement range Temperature: 0 - +50 °C Air humidity pre..
€2.50
Ex Tax:€2.07
Model: DHT22
A handy temperature and humidity sensor. This one is more precise than the DHT11. Specifications: Measurement range Humidity: 0 - 100% RH (0-50 °C temperature compensation) Measurement rang..
€5.00
Ex Tax:€4.13
Model: DHT22MOD
DHT22 Module + Cables. A handy temperature sensor and humidity sensor. This is a lot more accurate than the DHT11. Humidity measurement range: 0% ~ 100% RH Measuring range temperature: -40 ..
€5.50
Ex Tax:€4.55
Digital Thermostat Module with Relay - 12V - XH-W3001
New 2-4 Weeks
Model: XH-W3001-12V
With this module you can have a relay switch automatically based on temperature. When the relay switches, the red and yellow wire are connected to each other. The desired temperature can be set with t..
€4.00
Ex Tax:€3.31
Digital Thermostat Module with Relay - 24V - XH-W3001
New
Model: XH-W3001-24V
With this module you can have a relay switch automatically based on temperature. When the relay switches, the red and yellow wire are connected to each other. The desired temperature can be set with t..
€4.00
Ex Tax:€3.31
Model: XH-W1209
With this module you can switch a relay automatically based on the temperature. With the SET, + and buttons you can set the desired temperature. Everything is controlled by the built-in microcontroll..
€3.50
Ex Tax:€2.89
Model: ELEKTRODE-ECG
A disposable ECG electrode made of fabric to connect to an ECG device. The electrode has an adhesive layer that attaches it to the skin and can be thrown away after use. Specifications: Di..
€0.50
Ex Tax:€0.41
DS18B20 Adapter
2-4 Weeks
Model: DS18B20ADAPTER
This is a handy adapter for easily connecting a DS18B20 sensor to a microcontroller. The resistance needed to read the sensor is already on the module. Specifications: Resistance: 4.7kΩ Dimension..
€2.00
Ex Tax:€1.65
Model: DS18B20
A small but accurate temperature sensor in a TO-92 package. See the datasheet under the tab "Downloads" for more information...
€2.00
Ex Tax:€1.65
Model: DS18B20CBLSILICONE10M
This DS18B20 temperature sensor has a stainless steel housing and it is extended with a silicone cable of approximately 10m. The sensor can be easily connected with this adapter: DS18B20 Adapter. T..
€16.00
Ex Tax:€13.22
DS18B20 TO-92 Thermometer Temperature Sensor with cable - Waterproof - High temperature - 1m
2-4 Weeks
Model: DS18B20KABELSILICONE
The DS18B20 temperature sensor processed in a stainless steel housing and extended with a cable of about 100cm. The sensor can be easily connected with this adapter: DS18B20 Adapter. Pinout of the ..
€4.00
Ex Tax:€3.31
Model: DS18B20KABELSILICONE2M
The DS18B20 temperature sensor processed in a stainless steel housing and extended with a cable of about 200cm. Pinout of the wires: Red (Vcc/V+/plus), Yellow (data), White or Black (Gnd/min). T..
€6.00
Ex Tax:€4.96
Model: DS18B20KABELSILICONE4M
The DS18B20 temperature sensor housed in a stainless steel housing and extended with a cable of about 400cm. The sensor can be easily connected with this adapter: DS18B20 Adapter. Pinout of the wir..
€8.00
Ex Tax:€6.61
Model: E18-D80NK
The E18-D80NK sensor can measure the distance between an object with infrared reflection and send a signal. With the adjustment potentiometer you can set the desired distance of 3-80cm. Specificat..
€5.00
Ex Tax:€4.13
Model: AD8232-ECGKIT
This ECG kit uses the AD8232 chip to measure your heart rate. This kit contains: AD8232 module 3 Disposable ECG electrodes (spare electrodes can be ordered here) Connection wire for the E..
€9.00
Ex Tax:€7.44
Model: FLAMESENSOR
Detects fire/flames with wavelengths from 760 to 1100nm. Operates at 3.3V to 5V. The output D0 is high if the set light intensity falls below the threshold value, and thus low if it rises above the t..
€2.50
Ex Tax:€2.07
Model: GL5528
A photosensitive resistor (LDR) to measure the amount of light. The resistance varies based on the amount of light the LDR receives. The main differences between the GL55XX sensors are explained be..
€0.30
Ex Tax:€0.25
Model: GL5537
A photosensitive resistor (LDR) to measure the amount of light. The resistance varies based on the amount of light the LDR receives. The main differences between the GL55XX sensors are explained be..
€0.30
Ex Tax:€0.25
Model: SS44EMOD
A hall sensor module with an already soldered Hall Effect switch on the board. Please note:This module can be supplied with a compatible 3144 Hall effect switch, 44E Hall effect switch or an SS4..
€1.50
Ex Tax:€1.24
Model: MAX30102MOD
With this heart rate sensor and pulse oximeter you can easily read information from a person such as heart rate (in graph), heart rate (in BPM), SPO2 and body temperature via a finger. A library of th..
€5.00
Ex Tax:€4.13
Model: HK1100C-1.2MPA
With this sensor you can easily measure water pressure. Based on the output voltage, the water pressure can be calculated with the following equation: P = 15 Vout/Vcc - 1.5 Where P is the water ..
€11.00
Ex Tax:€9.09
Showing 1 to 50 of 270 (6 Pages)
1
false
false
true
Remove
Change
tr