Menu
Your Cart

M5Stack

Model: M5STACK-K024-B
This is an extensive M5Stack experiment kit with many different modules. This kit includes the M5Core. Furthermore, there are motors, sensors and many more modules all bundled on a large printed circuit board. With the included DuPont cables you can easily experiment with the different modules...
€148.00
Ex Tax:€122.31
Model: M5STACK-U006
This is an expansion hub unit for multiple Grove connections for M5Stack. Specifications: 1 to 3 Grove outputs 2x LEGO® compatible holes Note: Data transfer when connecting multiple I2C slave units/modules with the same address can cause problems. Package content: 1..
€3.50
Ex Tax:€2.89
Model: M5STACK-U040
This is an expansion hub unit with multiple Grove connections for the M5Stack. Specifications: 1 to 6 Grove outputs TCA9548A for data transfer from I2C slave units Multiple PaHubs can be used by clustering, it is possible to connect up to 36 I2C Grove connectors to a connection. ..
€6.00
Ex Tax:€4.96
Model: M5STACK-U041
The M5Stack PbHub is a single-bus Grove PortB expander with a built-in Atmega328 microcontroller.  Specifications: Built-in Atmega328 microcontroller 6x Grove PortB interface 1x Grove interface for I2C 2x LEGO® holes for mounting I2C address: 0x40 Package contents: ..
€6.00
Ex Tax:€4.96
Model: M5STACK-U080
The 18650C Hat is a base with a built-in 2000mAh Li-ion battery for the M5StickC*. This provides the M5StickC with a much larger battery capacity. The module is built in such a way that another Hat can be placed on it. The battery can be charged via a USB-C connection at the bottom (USB-C cable not ..
€10.00
Ex Tax:€8.26
Model: M5STACK-U003
This is a LED module with 3 RGB LEDs  and a Grove connection for the M5Stack.  Specifications: 3 Individually programmable RGB LEDs 2x LEGO® compatible holes 2x Grove connection (1x Grove cable included) Package content: 1x M5Stack LED Unit 1x Grove cable ..
€4.00
Ex Tax:€3.31
M5STACK 485T
2-4 Weeks
Model: M5STACK-A071
The M5STACK 485T is a T-shape connector for RS485 communication with two detachable 4-pins terminal blocks and a 4-pins terminal plug. This module connects multiple devices to the same RS485 bus. Many M5STACK products are compatible with this connector.  Specifications: 2x 4 pin HT3.96..
€4.00
Ex Tax:€3.31
Model: M5STACK-U076
The 8Servos Hat is a basis for the M5 StickC*. The module consists of eight servo connections, an RGB LED, a battery holder with battery and a switch. The servos are controlled by a built-in STM32F030F4 microcontroller. The module is controlled with I2C by placing an M5StickC*on top. Specificatio..
€10.50
Ex Tax:€8.68
Model: M5STACK-U095
This is a 6-axis module with 3-axis accelerometer, 3-axis gyroscope and a Grove connection for M5Stack. The module works via I2C communication. Specifications: Sensor: MPU6886 Gyroscope: 3-axis (x, y, z) Accelerometer: 3-axis (x, y, z) Resolution: 16-bit Max acceleration: &pl..
€9.00
Ex Tax:€7.44
Model: M5STACK-U056
This is a 3-axis accelerometer module with a Grove connection for M5Stack. The module works via I2C communication. Specifications: Sensor: ADXL345 3-axis (x, y, z) Resolution: 13-bit Measurements up to ±16g I2C address: 0x53 2x LEGO® compatible holes 1x Gr..
€4.50
Ex Tax:€3.72
Model: M5STACK-U069
This is a module with a 16-bit analog to digital converter for M5StickC. The module works via I2C communication. Specifications: Measuring voltage range: 0~12VDC Chip: ADS1100 Resolution: 16-bit I2C address: 0x48 2x LEGO® compatible holes 1x HT3.96 connection Package..
€6.00
Ex Tax:€4.96
Model: M5STACK-U013
This is a module with a 16-bit analog to digital converter for M5Stack. The module works via I2C communication. Specifications: Measuring voltage range: 0~12VDC Chip: ADS1100 Resolution: 16-bit I2C address: 0x48 2x LEGO® compatible holes 1x HT3.96 female connection 1x G..
€6.00
Ex Tax:€4.96
Model: M5STACK-U078
The AI Camera Unit-V is a camera module that runs on a Kendryte K210 chipset. The board has a 64-bit dual-core RISC-V CPU along with an OV2640 on board, which makes for good photos in low light and the ability to combine this with Machine Vision (AI facial recognition, object tracking and more). &nb..
€20.00
Ex Tax:€16.53
Model: M5STACK-U086
This is an isolated current sensor module with a Grove connection for M5Stack. The module contains a 16-bit ADC (analog to digital) converter, namely the ADS1115. The sensor is factory calibrated with the calibration data stored in the built-in EEPROM. The module works via I2C communication. Spec..
€12.00
Ex Tax:€9.92
Model: M5STACK-U005
This is a potentiometer unit with a Grove connection for the M5Stack.  Specifications: Output voltage range: 0~2.5V 2x LEGO® compatible holes 1x Grove connection (1x Grove cable included) Package content: 1x Potentiometer Unit 1x Grove cable See the following ..
€4.00
Ex Tax:€3.31
Model: M5STACK-K057
The Atom CAN Bus Kit is a CAN Bus module from M5Stack. The kit consists of two parts: An M5Stack Atom Lite and the CAN Bus module. With this module, a project can easily be connected to a CAN Bus network. Specifications CAN Bus Module: CAN Bus chip: CA-IS3050G Maximum number of bus no..
€18.00
Ex Tax:€14.88
Model: M5STACK-C008-C
The Atom Echo from M5Stack is a compact development board based on an ESP32 chipset. Among other things, it has WiFi and Bluetooth. In addition, this module also has a built-in push button, microphone and speaker. The board has a USB-C connection with which it can be programmed and/or powered (US..
€12.00
Ex Tax:€9.92
Model: M5STACK-K050
The Atom H-Driver Kit is an H-bridge motor driver module based on a DRV8876. The kit consists of two parts: An M5Stack Atom Lite and the H-Driver module. With this module a DC motor or other resistive or inductive load can be switched. Specifications H-Driver Module: Supply voltage: 9-24V D..
€18.00
Ex Tax:€14.88
Model: M5STACK-K039
The M5STACK ATOMIC Proto Kit is a DIY proto kit designed for the M5ATOM series. The module can be connected directly via the 9 pins on an M5ATOM. The kit consists of a PCB with connection material and a housing with accessories.  Specifications: Compatible with M5ATOM  Dimension..
€11.00
Ex Tax:€9.09
Model: M5STACK-C008
The Atom Lite from M5Stack is a compact development board based on an ESP32 chipset. It includes, amongst other things, WiFi, Bluetooth and a built-in push button.  The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable is not included). The programming ..
€9.50
Ex Tax:€7.85
Model: M5STACK-A086
The ATOM Mate is an M5Atom compatible kit, consisting of 3 parts. The kit includes: a Hat, a Mount and a Pin frame. The Hat is intended to mount M5StickC Hats on the M5ATOM series. The Mount is a LEGO® Compatible part with which an M5ATOM can easily be attached to LEGO®. The Pin frame is an ..
€4.50
Ex Tax:€3.72
Model: M5STACK-C008-B
The Atom Matrix from M5Stack is a compact development board based on an ESP32 chipset. It includes, amongst others, WiFi, Bluetooth and a LED matrix with a built-in push button.  The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable is not included..
€12.00
Ex Tax:€9.92
Model: M5STACK-K052
The M5Stack Atom PoE is a kit consisting of two parts: An ethernet module that supports Power over Ethernet (PoE) and an M5Stack Atom Lite. Specifications ethernet module: Ethernet chip: W5500 Maximum output power PoE: 6W RJ45 connection for a standard ethernet plug Ethernet speed: 10..
€27.50
Ex Tax:€22.73
Model: M5STACK-K054
The Atom Speaker Kit is an audio player that consists of three parts: An M5Stack Atom Lite, the SPK module and a speaker. Specifications SPK Module: Amplifier chip: NS4168 Nominal speaker power: 1W Built-in 3.5mm audio jack output Audio interface: I2S Built-in microSD card adapter: ..
€16.00
Ex Tax:€13.22
Model: M5STACK-T002
The ATOM Tail485 from M5Stack is an RS485 converter designed for the M5ATOM. The Tail485 is used to convert RS485 signals to TTL. Specifications: Built-in DC/DC converter (12V -> 5V) 1x 4 Pin HT3.96 connection Dimensions: 30 x 24 x 9mm Package contents: 1x ATOM TailBat 1..
€7.00
Ex Tax:€5.79
Model: M5STACK-T001
The ATOM TailBat from M5Stack is an external battery designed for the M5Stack M5ATOM. When the TailBat is connected to an M5ATOM, it is immediately supplied with power, so the M5ATOM can be used in mobile applications. The TailBat has a button with which it switches on and off, one click for on a..
€8.50
Ex Tax:€7.02
Model: M5STACK-K043
The Atomic GPS Kit is an M5Atom compatible GPS module with a built-in TF (Micro SD) card slot. This kit consists of 2 parts: an M5ATOM Lite, and the GPS module. Specifications GPS Module: Compatible with the M5Atom Lite/Matrix Support single system positioning of BDS/GPS/GLONASS/Galileo/S..
€26.00
Ex Tax:€21.49
Model: M5STACK-A077
The M5STACK ATOMIC Proto Kit is a DIY proto kit designed for the M5ATOM series. The module can be connected directly via the 9 pins on an M5ATOM. The kit has 2 PCBs included and a housing. Each PCB has 60 holes on which certain components can be soldered. Specifications: Circuit board: 60 h..
€6.00
Ex Tax:€4.96
Model: M5STACK-K041
The Atomic QR-CODE Reader is an M5Atom compatible module for reading Barcodes and QR-Codes. The reader contains 2 parts: The QR-Code reader module and the M5Atom Lite (included). This scanner supports 6 types of 2D codes and 19 types of 1D codes. The module has a built-in LED to recognize codes e..
€48.00
Ex Tax:€39.67
Model: M5STACK-K046
The Atomic RS232 Kit is an M5Atom compatible TTL to RS232 converter. This kit consists of 2 parts: an M5ATOM Lite, and the RS232 module. The voltage regulator in the ATOM RS-232 converts the 12V in the RS232 to 5V to power the M5Atom Lite / Matrix. Specifications RS232 Module: Input volt..
€18.00
Ex Tax:€14.88
Model: M5STACK-K045
The Atomic RS485 Kit is an M5Atom compatible TTL to RS485 converter. This kit consists of 2 parts: an M5ATOM Lite, and the RS458 module. The voltage regulator in the ATOM RS-485 converts the 12V in the RS485 to 5V for the power supply of the M5Atom Lite / Matrix. Specifications RS485 Module: ..
€16.00
Ex Tax:€13.22
Model: M5STACK-K047
The Atomic Stepmotor Development Kit is an M5Atom compatible stepper motor driver module with a built-in DRV8825 driver. This kit consists of 2 parts: an M5ATOM Lite, and the Stepmotor module. Specifications Stepmotor Module: Compatible with the M5Atom Lite Input voltage: 9-18V Output c..
€14.00
Ex Tax:€11.57
Model: M5STACK-K044
The Atomic TF-CARD is an M5Atom compatible module for reading TF cards (Compatible with microSD) up to 16GB. The reader contains 2 parts: The TF-CARD reader module and the M5Atom Lite (included). This module allows the ATOM Matrix or ATOM Lite to store files or load files without filling the flas..
€15.00
Ex Tax:€12.40
Model: M5STACK-U090
This is a barometric air pressure sensor module with a Grove connection for M5Stack. The module works via I2C communication. Specifications: Sensor: BMP280 Measuring range air pressure: 300-1100hPa Air pressure resolution: 0.16hPa Resolution temperature: 0.01°C Commu..
€6.00
Ex Tax:€4.96
Model: M5STACK-C001-C
The M5STACK Base BOTTOM Core is the bottom part of the M5Core with an M-Bus and extension pins on the sides of the module. The module also includes a built-in 110mAh battery. Specifications: Built-in battery: 110mAh Li-Po M-BUS Dimensions: 54.2 x 54.2 x 12.8mm Package contents: ..
€7.50
Ex Tax:€6.20
Model: M5STACK-K025
This is an extensive prototype module for the M5Core with a blank circuit board, power input and mounting options for wall mounting or DIN rails. This circuit board is specifically intended for the M5Stack Core and can be installed as an extra layer on it. Specifications: Input voltage: ..
€15.00
Ex Tax:€12.40
Model: M5STACK-K026
This is an extensive prototype module for the M5Core with a blank circuit board, power input and mounting options for wall mounting or DIN rails. This circuit board is specifically intended for the M5Stack Core and can be installed as an extra layer on it. Furthermore, this prototype module has a..
€13.00
Ex Tax:€10.74
Model: M5STACK-A068
This is a battery module for M5Camera. This module adds 400mAh to the battery capacity. This module can be used together with an M5 Camera module. Specifications: Battery type: Li-Po Capacity: 400mAh Package content: 1x M5Camera Battery Base Module Note: This battery mo..
€5.00
Ex Tax:€4.13
Model: M5STACK-M002
A battery module for the M5Core. This battery extension adds 700mAh to the battery capacity of the standard M5Core. Specifications: Capacity: 700mAh Package Contents: 1x M5Stack Battery Module..
€12.00
Ex Tax:€9.92
Model: M5STACK-A011
The M5Stack BTC Standing Base is a standard for the M5Core. With the standard you provide the M5Core with power. It also has a built-in SHT30 temperature and humidity sensor that works with I2C communication. Specifications: Input voltage: 5V DC USB-C connector Humidity sensor: SHT30 ..
€7.50
Ex Tax:€6.20
Model: M5STACK-K033
The BugC Hat is a robotic base for the M5StickC. The module has four DC motors, a motor driver, two RGB LED's, a battery holder with a battery and a switch. The motors are controlled by an on-board STM32F030F4 microcontroller. The module is controlled via I2C by a M5StickC* that is placed on top..
€16.00
Ex Tax:€13.22
Model: M5STACK-M024
The M5Stack Bus module has extra pins and a prototype circuit board for the M5Core. Specifications: 30 pins (2x15) for input and output Circuit board: 200 holes, 2.54 mm pitch Package Contents: 1x M5 Stack BUS Module..
€6.00
Ex Tax:€4.96
Model: M5STACK-U027
The Button Unit is a pushbutton module from M5Stack.  Specifications: Pushbutton 2x LEGO® compatible holes 1x Grove interface Package content: 1x M5Stack Button Unit 1x Grove cable For more information, see: M5STACK Button Unit  ..
€3.50
Ex Tax:€2.89
M5STACK Camera Timer X
Unknown
Model: M5STACK-U082-X
This is an ESP32 based camera from M5Stack. It has a built in battery and is designed to have a very low standby current. The module has a USB-C connection with which it can be programmed and/or powered. Specifications: ESP32 chip (240Mhz dual core processor) Flash memory: 4MB ..
€16.00
Ex Tax:€13.22
Model: M5STACK-U085
This is a CANBus module with a HY2.0 4P (Grove) connection for M5Stack. The module works via UART communication. Specifications: CAN Bus chip: CA-IS3050G Maximum number of bus nodes: 110 Maximum transfer speed: 1Mbps Security features: Signal isolation Current..
€9.00
Ex Tax:€7.44
Model: M5STACK-U077
The M5Stack CardKB Hat is a keyboard module for the M5StickC*. Specifications: I2C communication I2C address: 0x5F Multi-key support Designed for use with the M5StickC* Package contents: 1x CardKB Hat *Note: The M5StickC is not included For more information, see: M..
€6.50
Ex Tax:€5.37
Model: M5STACK-U035
The M5Stack CardKB Unit is a keyboard module with a Grove connection for M5Stack. The module works via I2C communication. Specifications: I2C communication I2C address: 0x5F Multi-key support 2x LEGO® compatible holes 1x Grove connection (1x Grove cable included) Package co..
€6.50
Ex Tax:€5.37
Model: M5STACK-U102
The Catch Unit is a robotic gripper from M5STACK. With a single servo and a gear mechanism, both arms of the gripper are moved. The unit has several places with which it can be attached to LEGO®. Specifications: Supply voltage: 4.2-6V DC Signal voltage: 4.2-6V DC Servo: SG92R ..
€6.00
Ex Tax:€4.96
Model: M5STACK-U009
The M5Stack Color Unit is an RGB color sensor module for M5Stack. The module works via I2C communication. Specifications: Sensor: TCS3472 I2C address: 0x29 2x LEGO® holes for mounting Grove connection Package contents: 1x Color Unit 1x Grove cable See the followi..
€6.00
Ex Tax:€4.96
Model: M5STACK-M031-G
This is a GPS module from M5Stack that is suitable for use with the M5Core. This module is based on a u-blox NEO-M8N with high sensitivity and fast acquisition.  Specifications: Supported GNSS (navigation) networks: BeiDou Galileo GLONASS GPS / QZSS Simultaneous ..
€35.00
Ex Tax:€28.93
Showing 1 to 50 of 179 (4 Pages)
1
false
false
true
Remove
Change
tr