Model: SONOFF-MINIR4
The Sonoff ZBMINI L2 is an extremely small ZigBee switch that fits into most EU type junction boxes.
It can be controlled with Android or iOS with ..
€11.50
Ex Tax:€9.50
Model: L3-5M-P
A smart led strip with individually adressable leds...
€24.00
Ex Tax:€19.83
Model: M5STACK-K128
M5Stack M5CoreS3 is a development kit based on an ESP32-S3 chipset. It has a built-in screen with touchscreen, Wi-Fi, Bluetooth, battery and nume..
€59.50
Ex Tax:€49.17
Model: HG22122801
A powerful LED that requires a cooling block...
€0.60
Ex Tax:€0.50
Model: LG22122601
A simple LED.
Note: Don't forget to use an LED series resistor. You can calculate which value is suitable for your application here: LED Resistor C..
€0.10
Ex Tax:€0.08
Model: YF-2103-1.2-180DEG
With this sensor you can easily measure the flow of liquids (water). The water connections are suitable for a 6mm hose: Hose 6mm
Pinout:
Red:..
€4.00
Ex Tax:€3.31
Model: LILYGO-H561
The T-Relay-8 is a handy relay module with Wi-Fi and Bluetooth. This module has 8 relays and an ESP32-Wrover.
Note: This board does not have a buil..
€21.50
Ex Tax:€17.77
Model: YF-2103-3.5-0DEG
With this sensor you can easily measure the flow of liquids (water). The water connections are suitable for a 6mm hose: Hose 6mm
Pinout:
..
€4.00
Ex Tax:€3.31
Brand: DFRobot
Model: WS-20232
This environment sensor module from Waveshare is made for the Raspberry Pi Pico or other microcontrollers that use the same pin layout. This allows yo..
€35.00
Ex Tax:€28.93
Model: WS-21474
This Bluetooth module from Waveshare is made for the Raspberry Pi Pico or other microcontrollers that use the same pin layout...
€5.25
Ex Tax:€4.34
Model: VRZARKWWSK2023
Check this page for more information: https://github.com/PE5PVB/weerstation
Note: The case and USB-C power supply are not included!..
€115.80
Ex Tax:€95.70
Model: LY22122901
A simple LED.
Note: Don't forget to use an LED series resistor. You can calculate which value is suitable for your application here: LED Resistor C..
€0.10
Ex Tax:€0.08
Model: HW22122801
A powerful LED that requires a cooling block...
€0.50
Ex Tax:€0.41
Model: LB22122801
A simple LED.
Note: Don't forget to use an LED series resistor. You can calculate which value is suitable for your application here: LED Resistor C..
€0.10
Ex Tax:€0.08
Model: WS-20550
A simple case suitable for the Raspberry Pi Pico.
Assembly instructions:
Remove the protection layer from the plastic parts
Position the Ra..
€1.75
Ex Tax:€1.45
Model: WS-3965
A module from Waveshare to connect an RS232 cable to your embedded system that has a UART connection...
€5.00
Ex Tax:€4.13
Model: WS-20410
An ethernet module from Waveshare made for the Raspberry Pi Pico and other microcontrollers that use the same pin layout. With this module you can eas..
€11.50
Ex Tax:€9.50
Model: WS-22623
An mini HDMI to FFC adapter from Waveshare. This adapter can be used in combination with Waveshare's FFC HDMI cables: Waveshare FFC HDMI
With ..
€3.00
Ex Tax:€2.48
Model: WS-15027
An mini HDMI to FFC adapter from Waveshare. This adapter can be used in combination with Waveshare's FFC HDMI cables: Waveshare FFC HDMI
With ..
€3.00
Ex Tax:€2.48
Model: WS-15030
An micro HDMI to FFC adapter from Waveshare. This adapter can be used in combination with Waveshare's FFC HDMI cables: Waveshare FFC HDMI
With..
€3.00
Ex Tax:€2.48
Model: WS-14527
An HDMI to FFC adapter from Waveshare. This adapter can be used in combination with Waveshare's FFC HDMI cables: Waveshare FFC HDMI
With a set of c..
€2.75
Ex Tax:€2.27
Model: WS-14474
An HDMI to FFC adapter from Waveshare. This adapter can be used in combination with Waveshare's FFC HDMI cables: Waveshare FFC HDMI
With a set of c..
€2.75
Ex Tax:€2.27
Model: WS-14721
This Waveshare FFC cable can be used to make a very flat HDMI cable in combination with the following adapters: Waveshare FFC HDMI adapter..
€2.00
Ex Tax:€1.65
Model: WS-14723
This Waveshare FFC cable can be used to make a very flat HDMI cable in combination with the following adapters: Waveshare FFC HDMI adapter..
€2.50
Ex Tax:€2.07
Model: WS-20170
This RGB LED matrix module from Waveshare is made for the Raspberry Pi Pico or other microcontrollers that use the same pin layout. All LEDs are contr..
€14.50
Ex Tax:€11.98
Model: WS-14722
This Waveshare FFC cable can be used to make a very flat HDMI cable in combination with the following adapters: Waveshare FFC HDMI adapter..
€2.25
Ex Tax:€1.86
Brand: Waveshare
Model: WS-20121
This battery module from Waveshare is made for the Raspberry Pi Pico or other microcontrollers that use the same pin layout. With this module with inc..
€15.00
Ex Tax:€12.40
Model: WS-16804
A LoRa module from Waveshare that can be used in several different ways. The module has the form factor of a Raspberry Pi SBC Hat so it is easy to use..
€22.50
Ex Tax:€18.60
Model: WS-16806
A LoRa module from Waveshare that can be used in several different ways. The module has the form factor of a Raspberry Pi SBC Hat so it is easy to use..
€24.50
Ex Tax:€20.25
Brand: M5Stack
Model: WS-3945
With this module you can provide certain microcontrollers with a CAN bus interface. For example, ESP32 based boards have a built-in CAN bus (TWAI) con..
€4.75
Ex Tax:€3.93
Brand: Waveshare
Model: WS-20903
With this module a fingerprint can be read with a Raspberry Pi, Arduino or other microcontroller. The fingerprint reader is connected via UART...
€19.50
Ex Tax:€16.12
Brand: Waveshare
Model: WS-23285
With this small Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. Due to its small size, it fits in ..
€16.00
Ex Tax:€13.22
Brand: Waveshare
Model: WS-19445
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. There is also a built-in fan for cooling..
€19.00
Ex Tax:€15.70
Model: GY-906DCC
This non-contact IR temperature sensor can be used to measure temperature of an object from a distance. This variant is extra accurate around 38C°, ma..
€13.50
Ex Tax:€11.16
Model: LILYGO-K201
LilyGO's T-Embed is a microcontroller board with a lot of features, such as an IPS display, rotary encoder, speaker and more. This version h..
€31.50
Ex Tax:€26.03
Brand: Devil Design
Model: DDPLA1.75M1KG-LIGHTGRAY
Note: This product can not be returned if the sealed packaging has been opened...
€18.00
Ex Tax:€14.88
Brand: Devil Design
Model: DDPETG1.75M1KG-LIGHTGRAY
Note: This product can not be returned if the sealed packaging has been opened...
€18.00
Ex Tax:€14.88
Model: LILYGO-H519
The TTGO T-PCIE SIM7600E-L1C is an expansion module that can be mounted via the PCIe slot on a TTGO T-PCIE. The module is controlled via AT commands. ..
€37.50
Ex Tax:€30.99
Model: LILYGO-H529
The TTGO T-PCIE SIM7600E-H is an expansion module that can be mounted via the PCIe slot on a TTGO T-PCIE. The module is controlled via AT commands. Th..
€47.50
Ex Tax:€39.26
Model: LILYGO-H545
The TTGO T-PCIE SIM7000E is an expansion module that can be mounted via the PCIe slot on a TTGO T-PCIE. The module is controlled via AT commands...
€29.00
Ex Tax:€23.97
Model: LILYGO-H542
The TTGO T-PCIE A7670E is an expansion module that can be mounted via the PCIe slot on a TTGO T-PCIE. The module is controlled via AT commands. The fu..
€24.50
Ex Tax:€20.25
Model: LILYGO-H583
A microcontroller with circular touchscreen display from LilyGO. It is easy to program, also like an Arduino.
Note: The display is not yet taped to..
€34.00
Ex Tax:€28.10
Model: PYF2-XG-12V
A standard solenoid valve with which, for example, the water flow in a hose or pipe can be regulated. The coupling is suitable for a 6mm hose: Hose 6m..
€6.50
Ex Tax:€5.37
Model: LILYGO-H579
A very small microcontroller with built-in display from LilyGO. It is easy to program, also like an Arduino. Compared to the normal T-QT, this board h..
€12.50
Ex Tax:€10.33
Model: LILYGO-L206
An OLED display from LilyGO. The pinout of this screen differs from most of our OLED screens, but this makes it suitable for placing directly on a T-B..
€6.50
Ex Tax:€5.37
Model: ABX00063
The Arduino GIGA R1 Wi-Fi is a much faster and more powerful microcontroller from Arduino, with the same form factor as the MEGA and DUE. In addition,..
€82.00
Ex Tax:€67.77
Model: 2.42OLEDYELLOW
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following pa..
€15.50
Ex Tax:€12.81
Model: 2.42OLEDWHITE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following pa..
€15.50
Ex Tax:€12.81
Model: 2.42OLEDGREEN
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following pa..
€15.50
Ex Tax:€12.81
Model: WS-19543
This SIM7600G-H Module from SIMCom is a powerful 4G LTE Cat-4 module with global coverage and GNSS support. Featuring a mini-PCIe connector, this modu..
€72.00
Ex Tax:€59.50
Model: LILYGO-H574
LilyGO's TTGO T-SIMCAM is a microcontroller with camera. The board has a USB-C connector that allows it to be programmed and/or powered (USB-C cable n..
€15.00
Ex Tax:€12.40
Model: ABX00061
The Nicla Voice enables always-on speech recognition with the powerful yet energy-efficient Syntiant® NDP120 Neural Decision microprocessor. It featur..
€86.00
Ex Tax:€71.07
Model: 2.23OLEDGREEN
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following pa..
€13.50
Ex Tax:€11.16
Model: 2.42OLEDBLUE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following pa..
€15.50
Ex Tax:€12.81
Model: 2.23OLEDYELLOW
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following pa..
€13.50
Ex Tax:€11.16
Model: 2.23OLEDWHITE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following pa..
€13.50
Ex Tax:€11.16
Model: 2.23OLEDBLUE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following pa..
€13.50
Ex Tax:€11.16
Model: 2.08OLEDWHITE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following pa..
€14.50
Ex Tax:€11.98
Brand: M5Stack
Model: M5STACK-U159
This is a HAT for the M5StickC (Plus) with a vibration motor. It can produce various vibration effects and is used for information prompts and haptic ..
€5.50
Ex Tax:€4.55
Brand: M5Stack
Model: M5STACK-K011-B-V11
The M5STACK PLC Proto Industrial Board Module V1.1 is an M5Stack base with a flexible layout and support for 9-24V input voltage. Besides this th..
€13.50
Ex Tax:€11.16
Brand: M5Stack
Model: M5STACK-U133-V11
The M5STACK KMeterISO unit is a thermocouple temperature sensor where the sensor is galvanically isolated. Internally there is an STM32 microcontrolle..
€19.00
Ex Tax:€15.70
Brand: M5Stack
Model: M5STACK-M127
The M5STACK Dual Kmeter Module 13.2 is a temperature measurement module with two channels. Internally there is an STM32 microcontroller that controls ..
€29.00
Ex Tax:€23.97
Brand: M5Stack
Model: M5STACK-U156
The Mini JoyC Hat is a joystick hat with a built-in 200mAh Li-ion battery for the M5StickC*.
*Note: The M5StickC is not included..
€10.50
Ex Tax:€8.68
Brand: M5Stack
Model: M5STACK-S005
A power management module from M5Stack including a battery charger and an RTC. The module also has a boost and a buck converter that convert the batte..
€9.50
Ex Tax:€7.85
Brand: M5Stack
Model: M5STACK-S007
The M5Stamp ESP32-S3 is a compact microcontroller with an ESP32-S3 chip and extensive IO capabilities for embedded applications and more...
€9.50
Ex Tax:€7.85
Brand: M5Stack
Model: M5STACK-M126
The M5STACK Display Module 13.2 is an expansion module that supports HD audio and video output, with up to 24-bit color depth and 1080P resolution, an..
€32.50
Ex Tax:€26.86
Brand: M5Stack
Model: M5STACK-C124
M5STACK's Atom S3 is a compact microcontroller with ESP32-S3 chip, infrared emitter and programmable buttons...
€10.00
Ex Tax:€8.26
Brand: Waveshare
Model: WS-19622
With this telecom module you can connect your Raspberry Pi Pico to the NB-IoT or CAT-M network. The module also has a built-in battery circuit with a ..
€18.00
Ex Tax:€14.88
Brand: Waveshare
Model: WS-16507
A camera module from Waveshare that is suitable for Jetson Nano/Xavier mini computers...
€17.50
Ex Tax:€14.46
Brand: Orange Pi
Model: OPI800
Note: At least a 4A adapter is required for the Orange Pi 800 (this is not included), we therefore strongly recommend using the original adapter from ..
€142.00
Ex Tax:€117.36
Brand: M5Stack
Model: M5STACK-K126
The M5Stick-T Lite is a compact thermal camera development kit with an MLX90640 sensor...
€89.00
Ex Tax:€73.55
Model: E-PAPER-2.9-BWR
This E-Paper display can easily be controlled with e.g. an ESP32 microcontroller.
You can use the following Library for this display: Adafruit_EPD
..
€12.00
Ex Tax:€9.92
Brand: Waveshare
Model: WS-19694
This battery module from Waveshare is made for the Raspberry Pi Pico or other microcontrollers that use the same pin layout. With this module and a 14..
€14.00
Ex Tax:€11.57
Model: SONOFF-ZBMINI-L2
The Sonoff ZBMINI L2 is an extremely small ZigBee switch that fits easily into EU type junction boxes and does not require a neutral wire. It is also ..
€14.00
Ex Tax:€11.57
Model: SONOFF-SNZB-02D
The Sonoff SNZB-02D is a very handy temperature and humidity sensor that works with the wireless ZigBee protocol. With this sensor module, you can eas..
€14.75
Ex Tax:€12.19
Brand: M5Stack
Model: M5STACK-U055-B
This is a speaker module for the M5Stick. This module has a built-in MAX98357 amplifier and a small speaker...
€7.25
Ex Tax:€5.99
Brand: M5Stack
Model: M5STACK-U158
A transparent OLED display unit from M5STACK with two buttons and a buzzer. The components are internally controlled by an STM32 microcontroller. This..
€31.00
Ex Tax:€25.62
Brand: Waveshare
Model: WS-19186
A development board based on an ESP32 microcontroller from Waveshare with the form factor of a Raspberry Pi SBC. Due to this form factor, the module c..
€19.50
Ex Tax:€16.12
Brand: Waveshare
Model: WS-20036
With this telecom module you can connect your Raspberry Pi Pico to the NB-IoT or CAT-M network. The module also has a GNSS (GPS) receiver and the modu..
€28.00
Ex Tax:€23.14
Brand: Waveshare
Model: WS-14810
A scanner that can scan both barcodes and QR codes. It can be read out via UART or via USB. In the second case, the module acts as a keyboard...
€37.00
Ex Tax:€30.58
Model: V5-HOTEND-1.75
Complete hotend for a 3D printer. The hotend is a good replacement for the hotend on an Anycubic i3 Mega.
Note: This hotend is delivered assembled,..
€10.00
Ex Tax:€8.26
Model: 1.75MK8-24VBOWDEN
Complete hotend for a 3D printer. The hotend is a good replacement for an Ender 3 (pro), Ender 5, etc...
€10.00
Ex Tax:€8.26
Model: 1.75MK8-12VBOWDEN
Complete hotend for a 3D printer. The hotend is a good replacement for a CR-10, among others...
€10.00
Ex Tax:€8.26
Brand: Waveshare
Model: WS-11199
This 7 inch Waveshare display with touchscreen is connected via HDMI and micro USB...
€41.00
Ex Tax:€33.88
Brand: Waveshare
Model: WS-24117
This is a comprehensive sensor kit, including Raspberry Pi Pico W. The modules are all connected to the PCB, but can also be detached and connected vi..
€56.00
Ex Tax:€46.28
Brand: Waveshare
Model: WS-20016
Note: No Raspberry Pi Compute Module is included...
€57.00
Ex Tax:€47.11
Brand: Waveshare
Model: WS-20591
A LED matrix from Waveshare with various extra features and expansion options.
Note: No Raspberry Pi Pico is included...
€42.00
Ex Tax:€34.71
Model: USB-RS485
A USB to RS-485 adapter with protection features such as TVS diodes and polyfuses...
€4.50
Ex Tax:€3.72
Brand: Waveshare
Model: WS-17675
You can update this E-paper screen via NFC. You can do this with an Android/IOS smartphone, provided it has NFC.
Note: Because this screen is large..
€78.00
Ex Tax:€64.46
Model: PANASONIC-NCR18650BD
Note: This battery is "bare" and does not contain protection against too high currents, deep discharge or too high a charging voltage. Purchase this b..
€5.75
Ex Tax:€4.75
Model: HC-12-SI4438
With the HC-12 module you can send data between two devices at a great distance. The module is equipped with an SI4438 Transceiver IC in combination w..
€8.00
Ex Tax:€6.61
Model: INR18650-33V
Note: This battery is "bare" and does not contain protection against too high currents, deep discharge or too high a charging voltage. Purchase this b..
€3.50
Ex Tax:€2.89
Model: 2.23OLEDORANGE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following pa..
€12.50
Ex Tax:€10.33
Model: ABI16C-P1-6V-Y
This metal LED (double, so polarity doesn't matter) with built-in series resistor can be easily installed thanks to the screw thread and supplied nut...
€2.75
Ex Tax:€2.27
Brand: M5Stack
Model: M5STACK-K023-B
This kit consists of an M5Stack Basic with pedestal and a PM2.5 Base module. This module consists of a PMSA003 laser dust sensor. The supplied pedesta..
€67.00
Ex Tax:€55.37
Brand: M5Stack
Model: M5STACK-S006
The M5STACK ISP Serial Programmer is a USB to serial converter with USB-C connector which can be used to program ESP32 microcontrollers. ..
€6.50
Ex Tax:€5.37
Brand: M5Stack
Model: M5STACK-C123
M5STACK's Atom S3 is a compact microcontroller with ESP32-S3 chip, 0.85 inch display, accelerometer and gyroscope...
€17.50
Ex Tax:€14.46