Model: I2C0.49OLEDWHITE
A 0.49 inch I2C OLED display with 64*32 white pixels and very good viewing angles of at least 160 degrees.
Pin
Description
GND
Ground/min/earth
VCC
3.3V or 5V power supply
SCL
I2C S..
€6.75
Ex Tax:€5.58
Model: I2C0.91OLEDBLUE
A 0.91 inch I2C OLED display with 128*32 blue pixels and very good viewing angles of at least 160 degrees.
Pin
Description
GND
Ground/min/earth
VCC
3.3V or 5V power supply
SCL
I2C S..
€6.50
Ex Tax:€5.37
Model: I2C0.91OLEDWHITE
A 0.91 inch I2C OLED display with 128*32 white pixels and very good viewing angles of at least 160 degrees.
Pin
Description
GND
Ground/min/earth
VCC
3.3V or 5V power supply
SCL
I2C ..
€6.50
Ex Tax:€5.37
Model: I2C0.96OLEDBLUE
A 0.96 inch I2C OLED display with 128*64 blue pixels and very good viewing angles of at least 160 degrees.
Pin
Description
GND
Ground/min/earth
VCC
3.3V or 5V power supply
SCL
I2C SCL..
€7.00
Ex Tax:€5.79
Model: 0.96OLEDBLUE
A 0.96 inch OLED display of 128*64 blue pixels and very good viewing angles of at least 160 degrees.
To connect the display you can follow the Adafruit manual for the majority.
The required library and manual can be found here.
Pin..
€7.00
Ex Tax:€5.79
Model: I2C0.96OLEDBLUEYEL
A 0.96 inch I2C OLED display with 128*64 blue and yellow pixels and very good viewing angles of at least 160 degrees.
Pin
Description
GND
Ground/min/earth
VCC
3.3V or 5V power supply
SC..
€7.00
Ex Tax:€5.79
Model: I2C0.96OLEDWHITE
A 0.96 inch I2C OLED display with 128*64 white pixels and very good viewing angles of at least 160 degrees.
Pin
Description
GND
Ground/min/earth
VCC
3.3V or 5V power supply
SCL
I2C ..
€7.00
Ex Tax:€5.79
Model: 0.96OLEDWHITE
A 0.96 inch OLED display of 128*64 white pixels and very good viewing angles of at least 160 degrees.
To connect the display you can follow the Adafruit manual for the majority.
The required library and manual can be found here.
Pi..
€7.00
Ex Tax:€5.79
Model: I2C1.3OLEDBLUE
A 1.3 inch I2C OLED display with 128*64 blue pixels and very good viewing angles of at least 160 degrees.
Pin
Description
GND
Ground/min/earth
VCC
3.3V or 5V power supply
SCL
I2C SCL ..
€8.00
Ex Tax:€6.61
Model: I2C1.3OLEDWHITE
A 1.3 inch I2C OLED display with 128*64 white pixels and very good viewing angles of at least 160 degrees.
Pin
Description
GND
Ground/min/earth
VCC
3.3V or 5V power supply
SCL
I2C SCL..
€8.00
Ex Tax:€6.61
Model: ZJY-2.08OLEDBLUE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: U8G2 Library
In the examples there are many possible drivers, however th..
€12.50
Ex Tax:€10.33
Model: ZJY-2.08OLEDWHITE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: U8G2 Library
In the examples there are many possible drivers, however th..
€12.00
Ex Tax:€9.92
Model: ZJY-2.23OLEDBLUE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€12.00
Ex Tax:€9.92
Model: ZJY-2.23OLEDGREEN
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€13.50
Ex Tax:€11.16
Model: ZJY-2.23OLEDORANGE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€12.50
Ex Tax:€10.33
Model: ZJY-2.23OLEDWHITE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€13.50
Ex Tax:€11.16
Model: ZJY-2.23OLEDYELLOW
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€13.50
Ex Tax:€11.16
Model: ZJY-2.42OLEDBLUE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€15.50
Ex Tax:€12.81
Model: ZJY-2.42OLEDGREEN
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€13.00
Ex Tax:€10.74
Model: ZJY-2.42OLEDWHITE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€15.50
Ex Tax:€12.81
Model: ZJY-2.42OLEDYELLOW
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€13.00
Ex Tax:€10.74
Model: ZJY312I0500WG11-SSD1362
A OLED display based on the SSD1362 driver. The display has a resolution of 256*64 pixels.
To get the display working you can use the U8g2 library...
€19.50
Ex Tax:€16.12
Model: LILYGO-L206
An OLED display from LilyGO. The pinout of this screen differs from most of our OLED screens, but this makes it suitable for placing directly on a T-Beam...
€6.50
Ex Tax:€5.37
Model: LILYGO-H531
This is a shield for the LilyGO T-Beam with a display and 3 programmable buttons...
€9.50
Ex Tax:€7.85
Model: M5STACK-U158
Brand: M5Stack
A transparent OLED display unit from M5STACK with two buttons and a buzzer. The components are internally controlled by an STM32 microcontroller. This can then in turn be controlled via I2C from another microcontroller...
€31.00
Ex Tax:€25.62
Model: M5STACK-U166
Brand: M5Stack
A very small OLED display unit from M5Stack...
€5.50
Ex Tax:€4.55
Model: SEEED-104020248
A module with an OLED display from Seeed Studio. With the built-in Grove connection and included Grove cable, the module can easily be connected to the microcontroller boards from Seeed Studio.
See the following page for more information: Seeed St..
€8.00
Ex Tax:€6.61
Model: SEEED-104020249
A module with an OLED display from Seeed Studio. With the built-in Grove connection and included Grove cable, the module can easily be connected to the microcontroller boards from Seeed Studio...
€8.00
Ex Tax:€6.61
Model: SEEED-104020208
A module with a 0.96 inch OLED display (SSD1315 driver) with white text from Seeed Studio.
For more information, see the following page: Grove - OLED Display 0.96" (SSD1315)..
€9.00
Ex Tax:€7.44
Model: SEEED-104020250
A module with an OLED display from Seeed Studio. With the built-in Grove connection and included Grove cable, the module can easily be connected to the microcontroller boards from Seeed Studio...
€16.00
Ex Tax:€13.22
-display-module-9664-pixels-200x200.jpg "Waveshare 0.95 inch RGB OLED (A) Display - 96*64 Pixels - SPI"){kind=tracking}
Model: WS-10507
Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed.
See the following page for more information: 0.95 inch SPI RGB OLED (A) Display Module..
€12.00
Ex Tax:€9.92
-display-module-9664-pixels-200x200.jpg "Waveshare 0.95 inch RGB OLED (B) Display - 96*64 Pixels - SPI"){kind=tracking}
2-4 Weeks
Model: WS-10514
Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed.
See the following page for more information: 0.95 inch SPI RGB OLED (B) Display Module..
€12.00
Ex Tax:€9.92
Model: WS-19376
Brand: Waveshare
This 1.3-inch Waveshare display HAT can be controlled via an SPI interface. The HAT has 2 integrated push buttons.
Note: No Raspberry Pi Pico is included...
€9.50
Ex Tax:€7.85
Model: WS-13890
Brand: Waveshare
This 1.3 inch Waveshare display is connected via the SPI interface of Raspberry Pi. The HAT has an integrated joystick and 3 tactile push buttons.
For more information, see the following page: 1.3 inch OLED HAT..
€13.00
Ex Tax:€10.74
Model: WS-14747
Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed.
See the following page for more information: 1.5 inch SPI RGB OLED Display Module..
€17.50
Ex Tax:€14.46
Model: WS-17009
Brand: Waveshare
A Waveshare 2.23 inch OLED display HAT with SPI and I2C interface.
For more information, see the following page: 2.23inch OLED HAT..
€17.00
Ex Tax:€14.05
Model: WS-19750
Brand: Waveshare
This is a handy 2.23 inch OLED display Hat for a Raspberry Pi Pico.
Note: No Raspberry Pi Pico is included...
€12.50
Ex Tax:€10.33
Model: WS-17527
Brand: Waveshare
A 5.5 inch AMOLED display with a handy enclusure in which a Raspberry Pi 4 can easily be concealed.
Note: The display is in portrait mode by default, you can change the oriëntation in your OS settings.
Note: No Raspberry Pi is included...
€119.00
Ex Tax:€98.35
Model: WMOLEDMOD-0.49
A module with a small OLED display for microcontrollers from Wemos that have an I2C connection.
See the following page for more information: OLED 0.49
Note: Because Wemos regularly improves its products, it may be that an older version is suppl..
€5.00
Ex Tax:€4.13
Model: WMOLEDMOD-0.96
A module with a small 0.96 inch OLED display for microcontrollers from Wemos that have an I2C connection.
No I2C cable is included with this module.
For more information, see this page: OLED 0.96
Note: Because Wemos regularly improves its p..
€7.00
Ex Tax:€5.79
Showing 1 to 42 of 42 (1 Pages)