Model: A000024
The Arduino Ethernet Shield 2 has a W5500 ethernet controller and a microSD card reader.
Specifications:
Input supply voltage: 5V DC (to be received from the Arduino board)
Ethernet controller: W5500 with internal 32K buffer
Connec..
€29.25
Ex Tax:€24.17
2-4 Weeks
Model: ABT-ECAT-SHIELD
The EasyCat Shield is an EtherCat shield that can be used to make an EtherCat Slave from an Arduino. EtherCat is a modification of the well-known Ethernet protocol and offers the possibility to connect a bus of devices. Watch this video for a short ..
€72.00
Ex Tax:€59.50
Model: ABT-ECAT-GATEWAY
The EasyCat Gateway is a device that can exchange data between an EtherCat bus and a USB Host or Ethernet network. EtherCat is a modification of the well-known Ethernet protocol and offers the possibility to connect a bus of devices. Watch this vide..
€105.00
Ex Tax:€86.78
Model: ENC28J60
This ethernet module can be connected to eg an Arduino Uno or Arduino Mega.
The names of the pins are listed on the PCB.
Specifications:
Voltage: 3.3V DC
Control: SPI
Dimensions: 48.8 x 18.5mm
For more information see this tutoria..
€8.00
Ex Tax:€6.61
Model: ENC28J60MOUNT
This module can be connected to eg an Arduino Uno or Arduino Mega.
The names of the pins are listed on the PCB.
Specifications:
Voltage: 3.3V DC
Control: SPI
Has four 3mm holes for mounting
Dimensions: 56 x 34mm
For more informat..
€5.50
Ex Tax:€4.55
Model: W5100
You can easily use this shield on an Arduino Uno (5V), Arduino Mega (5V), Arduino Due (3.3V), etc. You can connect a micro SD card to store files such as images. For example, these images can be incorporated into a website. There are different versio..
€14.50
Ex Tax:€11.98
2-4 Weeks
Model: M5STACK-K012-C
Brand: M5Stack
The M5Stack LAN W5500 Module with PoE offers the possibility to provide an M5Core with an ethernet connection via a W5500 chip. This provides the Core with internet where there is no WiFi signal, for example in a closed cabinet. In addition, a T..
€55.00
Ex Tax:€45.45
Model: ENC28J60NANOSHIELD
This ethernet shield can easily be connected to an Arduino Nano.
The names of the pins are listed on the bottom of the circuit board.
Pinout of module:
SS (CS) pin: D10
MOSI (SI) pin: D11
MISO (SO) pin: D12
SCK pin: D13
For more ..
€9.50
Ex Tax:€7.85
Model: TEENSYETHERNETKIT-4.1
With this DIY kit you provide the Teensy 4.1 with an ethernet connection.
This product comes with loose parts and still needs to be soldered.
For more information, see this page: PT8211 Ethernet Kit..
€6.00
Ex Tax:€4.96
Model: W5500
This is a W5500 ethernet module, this tutorial explains how you can get it working with an Arduino.
Specifications:
Wiznet W5500 Ethernet chip
Voltage (power supply): 3.3V DC or 5V DC (see PCB for connections)
Voltage ..
€5.50
Ex Tax:€4.55
Model: WIZ850IO
This module is compatible with the WIZ850io module and usually also compatible with the WIZ820io module if the software also supports the W5500 chip.
The W5500 Wiznet Ethernet chip is the successor to the W5200 ethernet chip with less power consumpt..
€9.00
Ex Tax:€7.44
Model: WS-16595
Brand: Waveshare
With this HAT you can expand a Raspberry Pi with 3 USB-A ports and an RJ45 Ethernet port. The HAT is specially designed for the Raspberry Pi Zero, but also works with other models.
Specifications:
Compatible with Raspberry Pi: B+/2B/3B/3B+/4..
€12.00
Ex Tax:€9.92
Model: WS-20410
An ethernet module from Waveshare made for the Raspberry Pi Pico and other microcontrollers that use the same pin layout. With this module you can easily connect your microcontroller to the internet...
€11.50
Ex Tax:€9.50
Model: WS-23273
Brand: Waveshare
A Waveshare module that can be used as a bridge between Ethernet and RS-485 communication...
€22.50
Ex Tax:€18.60
-voor-raspberry-pi-default-200x200.jpg "Waveshare Power over Ethernet PoE HAT (B) - for Raspberry Pi")
Model: WS-18014
Brand: Waveshare
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. There is also a built-in fan for cooling the Raspberry Pi, which can be turned on by default or programmed when it turns on. In addition, th..
€19.00
Ex Tax:€15.70
-for-raspberry-pi-3b+-4b-200x200.jpg "Waveshare Power over Ethernet PoE HAT (C) - for Raspberry Pi")
Model: WS-19445
Brand: Waveshare
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. There is also a built-in fan for cooling the Raspberry Pi, which can be turned on with a switch.
This module is suitable for the Raspberr..
€19.00
Ex Tax:€15.70
-for-raspberry-pi-200x200.jpg "Waveshare Power over Ethernet PoE HAT (E) - for Raspberry Pi")
Model: WS-23285
Brand: Waveshare
With this small Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. Due to its small size, it fits in many standard Raspberry Pi housings.
This module is suitable for the Raspberry Pi 3B+ and 4B.
..
€16.00
Ex Tax:€13.22
Showing 1 to 23 of 23 (1 Pages)