Menu
Your Cart

Ethernet

Arduino Ethernet Shield 2
2-4 Weeks
Model: A000024
The Arduino Ethernet Shield 2 has a W5500 ethernet controller and a microSD card reader.  Specifications: Input supply voltage: 5V DC (to be received from the Arduino board) Ethernet controller: W5500 with internal 32K buffer Connec..
€23.00
Ex Tax:€19.01
B-STOCK - Ethernet Shield W5100
B-Stock
Model: BSTOCK-W5100
B-Stock products are products that do not (any longer) meet our standard quality, but can still be used. The reason for this and any defects are explained in more detail below. Original product: Ethernet Shield W5100 Reason for B-Stock:..
€9.50
Ex Tax:€7.85
Model: ABT-ECAT-SHIELD
The EasyCat Shield is an EtherCat shield that can be used to make an EtherCat Slave from an Arduino. EtherCat is a modification of the well-known Ethernet protocol and offers the possibility to connect a bus of devices. Watch this video for a short ..
€72.00
Ex Tax:€59.50
Model: ABT-ECAT-GATEWAY
The EasyCat Gateway is a device that can exchange data between an EtherCat bus and a USB Host or Ethernet network. EtherCat is a modification of the well-known Ethernet protocol and offers the possibility to connect a bus of devices. Watch this vide..
€105.00
Ex Tax:€86.78
Model: ENC28J60
This ethernet module can be connected to eg an Arduino Uno or Arduino Mega. The names of the pins are listed on the PCB. Specifications: Voltage: 3.3V DC Control: SPI Dimensions: 48.8 x 18.5mm For more information see this tutoria..
€6.50
Ex Tax:€5.37
Model: ENC28J60MOUNT
This module can be connected to eg an Arduino Uno or Arduino Mega. The names of the pins are listed on the PCB. Specifications: Voltage: 3.3V DC Control: SPI Has four 3mm holes for mounting Dimensions: 56 x 34mm For more informat..
€5.50
Ex Tax:€4.55
Model: W5100
You can easily use this shield on an Arduino Uno (5V), Arduino Mega (5V), Arduino Due (3.3V), etc. You can connect a micro SD card to store files such as images. For example, these images can be incorporated into a website. There are different versio..
€14.50
Ex Tax:€11.98
Model: M5STACK-K052
The M5Stack Atom PoE is a kit consisting of two parts: An ethernet module that supports Power over Ethernet (PoE) and an M5Stack Atom Lite. Specifications ethernet module: Ethernet chip: W5500 Maximum output power PoE: 6W RJ45 connection..
€41.00
Ex Tax:€33.88
M5STACK LAN PoE W5500 V1.2 Base - for M5Core
New
Model: M5STACK-K012-C-V12
..
€59.00
Ex Tax:€48.76
Model: M5STACK-K012-C
The M5Stack LAN W5500 Module with PoE offers the possibility to provide an M5Core with an ethernet connection via a W5500 chip. This provides the Core with internet where there is no WiFi signal, for example in a closed cabinet. In addition, a T..
€55.00
Ex Tax:€45.45
Model: M5STACK-K012-B-V12
..
€38.00
Ex Tax:€31.41
M5STACK MQTT PoE Unit - W5500
New
Model: M5STACK-U129-B
..
€50.00
Ex Tax:€41.32
M5STACK MQTT Unit - W5500
New
Model: M5STACK-U129
..
€33.50
Ex Tax:€27.69
Model: ENC28J60NANOSHIELD
This ethernet shield can easily be connected to an Arduino Nano. The names of the pins are listed on the bottom of the circuit board. Pinout of module: SS (CS) pin: D10 MOSI (SI) pin: D11 MISO (SO) pin: D12 SCK pin: D13 For more ..
€9.50
Ex Tax:€7.85
Model: TEENSYETHERNETKIT-4.1
With this DIY kit you provide the Teensy 4.1 with an ethernet connection. This product comes with loose parts and still needs to be soldered. For more information, see this page: PT8211 Ethernet Kit..
€6.00
Ex Tax:€4.96
Model: W5500
This is a W5500 ethernet module, this tutorial explains how you can get it working with an Arduino. Specifications: Wiznet W5500 Ethernet chip Voltage (power supply): 3.3V DC or 5V DC (see PCB for connections) Voltage ..
€7.50
Ex Tax:€6.20
W5500 Ethernet Module - WIZ850io compatible
2-4 Weeks
Model: WIZ850IO
This module is compatible with the WIZ850io module and usually also compatible with the WIZ820io module if the software also supports the W5500 chip. The W5500 Wiznet Ethernet chip is the successor to the W5200 ethernet chip with less power consumpt..
€9.00
Ex Tax:€7.44
Model: WS-16595
With this HAT you can expand a Raspberry Pi with 3 USB-A ports and an RJ45 Ethernet port. The HAT is specially designed for the Raspberry Pi Zero, but also works with other models. Specifications: Compatible with Raspberry Pi: B+/2B/3B/3B+/4..
€12.00
Ex Tax:€9.92
Model: WS-18014
With this Power over Ethernet (PoE) HAT you can supply a Raspberry Pi with power via the ethernet connection. There is also a built-in fan for cooling the Raspberry Pi, which can be turned on by default or programmed when it turns on. In addition, th..
€18.00
Ex Tax:€14.88
Showing 1 to 20 of 20 (1 Pages)
1
false
true
true
Remove
Change
tr