Menu
Your Cart

Audio Sources

Model: AUDSELECTBOARDRCA
A 4 channel audio selector borte select one of the inputs as the output channel. This module selects the required channel by relays. With the included rotary knob the preferred channel can be selected. Both modules are connected by a small included cable. Seperates LED's are included to indicate..
€13.00
Ex Tax:€10.74
Model: AUDSELECTBOARDPINTER
A 4 channel audio selector borte select one of the inputs as the output channel. This module selects the required channel by relays. With the included rotary knob the preferred channel can be selected. Both modules are connected by a small included cable. Specifications: 4 Stereo input chan..
€12.00
Ex Tax:€9.92
Model: ES9023DAC
A DAC module that operates on the I2S (inter-IC sound) interface, suitable to convert a digital audio signal to an analog signal. Operates on a 5V input voltage. Specifications: Input voltage: 5VDC Samplerate: 192 KHz Bits per channel: 24 Stereo output. (RCA plug)  The ..
€13.00
Ex Tax:€10.74
Model: PSDAC
This high quality DAC converts an S/PDIF signal into analog stereo signal to the RCA and/or 3.5mm output. This board uses an advanced chip from Texas Instruments which ensures high quality audio. Specifications: Input voltage: 5V via micro USB connection (minimum 500mA power supply recommen..
€36.00
Ex Tax:€29.75
JustBoom DAC HAT for Raspberry Pi
2-4 Weeks
Model: PSPIDACHAT
This high quality DAC gives your Raspberry Pi a much better audio output. This board uses an advanced chip from Texas Instruments which ensures high quality audio. With included mounting material and extensive software manuals, setup is very easy and you can get your DAC up and running in a short ti..
€32.00
Ex Tax:€26.45
Model: MINIMP3MOD
With this mini MP3 module you can play various formats of music and have it controlled by your Arduino. The music is on a micro-SD card that you can place in the micro-SD card holder on the shield. The module can be controlled with separate pins and/or with UART (serial with TX/RX). Specificati..
€4.00
Ex Tax:€3.31
Model: MP3MOD-YX5300
With this mini MP3 module you can play music from a microSD card and have it controlled by an Arduino or other microcontroller. The module can be controlled with UART (TX/RX). Specifications: Supply voltage: 3.2-5.2V DC Signal voltage: 3.2-5.2V Interface: UART (TX/RX) Baud rate: 9600b..
€4.00
Ex Tax:€3.31
Model: BY8301-16P
A small audio module with a micro USB connector on which MP3 and WAV files can be easily stored and played. Specifications: Supply voltage: 3.6-5V DC (via micro USB or VCC pin) Signal voltage: 3.6-5V Audio chip: BY8301-24SS Flash memory: 4MB Communication: UART Baud rate: 9600..
€5.00
Ex Tax:€4.13
Model: VS1053MP3SHIELD
With this MP3 shield you can play various formats of music and have it controlled by your Arduino. The music is on a micro-SD card that you can place in the micro-SD card holder on the shield. In addition to playing music, this shield can also record music with the build-in microphone or an extern..
€15.00
Ex Tax:€12.40
Model: PCM5102DAC
A DAC module that operates on the I2S (inter-IC sound) interface, suitable to convert a digital audio signal to an analog signal. Operates on a 5V input voltage. Specifications: Input voltage: 5-10V DC Samplerate: 384 KHz Bits per channel: 32 Stereo output. (RCA plug)  ..
€11.00
Ex Tax:€9.09
Model: BTAUDIORECEIVER-MH-M28
This MH-M28 Bluetooth audio receiver is a simple Bluetooth module to which audio can be streamed via Bluetooth from, for example, a laptop or telephone. The audio is then outputted on the audio jack and audio pins that are present on the board. This module does not need to be programmed and can ther..
€4.50
Ex Tax:€3.72
Model: BTAUDIORECEIVER-MBT5.0
This Bluetooth audio receiver is a simple Bluetooth module with which audio can be played via Bluetooth from, for example, a laptop or telephone. The audio is then outputted on the audio jack and audio pins that are present on this board. The supplied microphone also makes it possible to m..
€5.50
Ex Tax:€4.55
Model: TEENSYAUDIOBOARD
With this adapter you can add 16-bit high-quality stereo audio to your project in combination with a Teensy 3.2. In addition to a stereo audio output, this module also has a mono microphone input for recording sound. (Microphone not included) For more information, see this page: Audio Adapter B..
€16.00
Ex Tax:€13.22
Model: TEENSYPT8211KIT
The Teensy PT8211 Audio Kit is a DIY digital to analog (DAC) converter shield for the Teensy 3.x. The PT8211 chip is a 16 bit DAC and provides a line-level output signal. This means that the signal is not intended to connect speakers directly, but an amplifier. This product comes with loose ..
€5.00
Ex Tax:€4.13
Showing 1 to 14 of 14 (1 Pages)
1
false
false
true
Remove
Change
tr