Model: AB6Y-A-GREEN
A push button that can be used as an on/off button. After pressing the button, the button will remain in a different position (lower or higher)...
€2.50
Ex Tax:€2.07
Model: AB6Y-A-6.3V-GREEN
A push button with LED that can be used as an on/off button. After pressing the button, the button will remain in a different position (lower or higher). The LED is double such that the polarity does not matter, it also comes with a built-in series r..
€3.00
Ex Tax:€2.48
Model: AB6Y-M-GREEN
A push button that can be used as a reset button. The button springs back after being pressed (no on/off switch)...
€2.50
Ex Tax:€2.07
Model: AB6Y-M-6.3V-GREEN
A push button with LED that can be used as a reset button. The button springs back after being pressed (no on/off switch). The LED is double such that the polarity does not matter, it also comes with a built-in series resistor...
€3.00
Ex Tax:€2.48
Model: JOYSTICKSHIELD
This shield has four handy buttons and a joystick. There are also pins available to easily connect your NRF24L01 or Bluetooth (HC-06) module to your Arduino.
Specifications:
Joystick with push button present in combination with four pushbutt..
€5.00
Ex Tax:€4.13
Model: KS0466
A push button module from Keyestudio where all buttons can be read via one analog pin...
€2.50
Ex Tax:€2.07
Model: KS0029
A digital push button module from Keyestudio.
The button springs back after pressing (no on/off switch)...
€2.25
Ex Tax:€1.86
Model: KEY1x4
This handy keypad with 1x4 matrix buttons can be used to select a mode for example.
There are many applications possible!
Electronic features:
Circuit works with maximum: 35V (DC), 100mA or 1W
Contact resistance: 10Ω ~ 500Ω (Varies in rel..
€1.50
Ex Tax:€1.24
Model: MEMKEY3x4
This handy keypad with 3x4 matrix buttons can be used to enter a pin code, for example, or to set a clock.
The keypad has membrane switches and all buttons are numbered from 0-9, and the characters * and #.
Dimensions (black part): 64 x 51mm
..
€3.75
Ex Tax:€3.10
Model: KEY4x4
This handy keypad with 4x4 matrix buttons can be used to, for example, enter a pin code or set a clock.
Specifications:
Electrical properties:
Maximum current: 100mA
Maximum voltage: 35V DC
Maximum power: 1W
Contact resistance..
€2.00
Ex Tax:€1.65
Model: MEMKEY4x4
This handy keypad with 4x4 matrix buttons can be used to enter a pin code, for example, or to set a clock.
The keypad has membrane switches and all buttons are numbered from 0-9, letters A, B, C and D, and the characters * and #.
The..
€3.50
Ex Tax:€2.89
Model: KEY4x4MICROPCB
A 4x4 matrix keypad consisting of microswitch buttons. The module has four holes 3mm (M3) holes for mounting.
The pin designations on each PCB are shown on each PCB. Four pins are thus used as a 'x' coordinate and the other 4 as a 'y' coordinate.
..
€1.00
Ex Tax:€0.83
Model: KEY4x4TACTPCB
A 4x4 matrix keypad consisting of tactile switch buttons.
Four pins are thus used as 'x' coordinate and the 4 others as 'y' coordinate.
The module is already equipped with a soldered series of pinheaders.
Dimensions: 42 ..
€1.50
Ex Tax:€1.24
Model: PBS-32-2-BLUE
A large push button that can be used as a "reset" button. The button springs back after pressing it (no on-off switch). In addition, this button can be mounted in both a 24mm and 40mm hole. This can be chosen with the supplied plastic mounting parts...
€3.50
Ex Tax:€2.89
Model: PBS-32-2-GREEN
A large push button that can be used as a "reset" button. The button springs back after pressing it (no on-off switch). In addition, this button can be mounted in both a 24mm and 40mm hole. This can be chosen with the supplied plastic mounting parts...
€3.50
Ex Tax:€2.89
Model: PBS-32-2-RED
A large push button that can be used as a "reset" button. The button springs back after pressing it (no on-off switch). In addition, this button can be mounted in both a 24mm and 40mm hole. This can be chosen with the supplied plastic mounting parts...
€3.50
Ex Tax:€2.89
Model: PBS-32-2-WHITE
A large push button that can be used as a "reset" button. The button springs back after pressing it (no on-off switch). In addition, this button can be mounted in both a 24mm and 40mm hole. This can be chosen with the supplied plastic mounting parts...
€3.50
Ex Tax:€2.89
Model: PBS-32-2-YELLOW
A large push button that can be used as a "reset" button. The button springs back after pressing it (no on-off switch). In addition, this button can be mounted in both a 24mm and 40mm hole. This can be chosen with the supplied plastic mounting parts...
€3.50
Ex Tax:€2.89
Model: LILYPADONOFFSWITCH
An on/off switch specifically for LilyPad products...
€2.50
Ex Tax:€2.07
Model: LILYPADPUSHBUTTON
A standard push button especially for LilyPad products...
€2.00
Ex Tax:€1.65
Model: M5STACK-U027
Brand: M5Stack
The Button Unit is a pushbutton module from M5Stack. ..
€3.50
Ex Tax:€2.89
Model: M5STACK-U192
Brand: M5Stack
A module of M5Stack with 8 tactile buttons and digital LEDs. The module contains a microcontroller that reads the button states and controls the digital LEDs. The microcontroller communicates via I2C with an external microcontroller...
€8.50
Ex Tax:€7.02
Model: M5STACK-U191
Brand: M5Stack
A module of M5Stack with 8 switches and digital LEDs. The module contains a microcontroller that reads the switch states and controls the digital LEDs. The microcontroller communicates via I2C with an external microcontroller...
€25.00
Ex Tax:€20.66
Model: M5STACK-U205
A module from M5Stack with a joystick and an RGB LED for the modular chain system...
€9.75
Ex Tax:€8.06
Model: M5STACK-U206
A module from M5Stack with a mechanical key and two RGB LEDs for the modular chain system...
€8.75
Ex Tax:€7.23
Model: M5STACK-U207
Brand: M5Stack
A module from M5Stack with a rotary encoder and an RGB LED for the modular chain system...
€8.25
Ex Tax:€6.82
Model: M5STACK-U025
Brand: M5Stack
The Dual-Button Unit is a button module from M5Stack. It has a blue and a red pushbutton. ..
€4.75
Ex Tax:€3.93
Model: M5STACK-A007
Brand: M5Stack
This is an M5Stack FACES joystick module with built-in RGB LEDs.
Specifications:
12 RGB LEDs around the joystick
I2C communication
I2C address: 0x5E
Package content:
1x M5Stack Joystick Module
For more information an..
€9.75
Ex Tax:€8.06
Model: M5STACK-M129
..
€13.00
Ex Tax:€10.74
Model: M5STACK-U079
Brand: M5Stack
With this M5Stack JoyC Hat you can turn an M5stickC to a wireless controller. For example, this can be used as a wireless robot/game controller. RGB LEDs are located under each joystick to indicate the direction of the joystick. The JoyC Hat has a 1x..
€27.00
Ex Tax:€22.31
Model: M5STACK-U073
Brand: M5Stack
The M5Stack Joystick Hat is an expansion module for the M5StickC*. It can be used as a robot or game controller.
Specifications:
I2C communication
I2C: adres 0x38
Omni-directional movement
Pushbutton
Designed for use with the M..
€6.00
Ex Tax:€4.96
Model: M5STACK-U024-V2
A module from M5Stack with a joystick and an RGB LED...
€6.50
Ex Tax:€5.37
Model: M5STACK-U144
Brand: M5Stack
A push button module from M5Stack with a mechanical keyboard button and also a built-in digital LED...
€6.00
Ex Tax:€4.96
Model: M5STACK-U156
Brand: M5Stack
The Mini JoyC Hat is a joystick hat with a built-in 200mAh Li-ion battery for the M5StickC*.
*Note: The M5StickC is not included..
€10.50
Ex Tax:€8.68
Model: M5STACK-U157
Brand: M5Stack
Note: This product is only compatible with the M5StickC and M5StickC Plus and is not compatible with the M5StickS3...
€8.50
Ex Tax:€7.02
Model: M5STACK-U186
A module from M5Stack with a scroll wheel (rotary encoder) and an RGB LED...
€6.00
Ex Tax:€4.96
Model: M5STACK-U198
Brand: M5Stack
A 16-position rotary encoder module from M5Stack that can be read via I2C. This unit also features an integrated 7-segment display and a digital RGB LED...
€9.25
Ex Tax:€7.64
Model: MEMKEY-GRN
A membrane keypad with double-sided tape on the back with which the keypad can be mounted.
Specifications:
Maximum contact resistance: 50Ω
Maximum current: 100mA
Connector: DuPont 2p female
Number of buttons: 1
Button color: Green
..
€1.00
Ex Tax:€0.83
Model: MEMKEY-GREY
A membrane keypad with double-sided tape on the back with which the keypad can be mounted.
Specifications:
Maximum contact resistance: 50Ω
Maximum current: 100mA
Connector: DuPont 2p female
Number of buttons: 1
Button color: Grey
W..
€1.00
Ex Tax:€0.83
Model: MEMKEY-RED
A membrane keypad with double-sided tape on the back with which the keypad can be mounted.
Specifications:
Maximum contact resistance: 50Ω
Maximum current: 100mA
Connector: DuPont 2p female
Number of buttons: 1
Button color: Red
Wo..
€1.00
Ex Tax:€0.83
Model: MEMKEY-YEL
A membrane keypad with double-sided tape on the back with which the keypad can be mounted.
Specifications:
Maximum contact resistance: 50Ω
Maximum current: 100mA
Connector: DuPont 2p female
Number of buttons: 1
Button color: Yellow
..
€1.00
Ex Tax:€0.83
Model: MEMKEY2-REDYEL
A membrane keypad with double-sided tape on the back with which the keypad can be mounted.
Specifications:
Maximum contact resistance: 50Ω
Maximum current: 100mA
Connector: DuPont 3p female
Number of buttons: 2
Button color: Red and ..
€1.10
Ex Tax:€0.91
Model: MEMKEY2-REDYELARROW
A membrane keypad with double-sided tape on the back with which the keypad can be mounted.
Specifications:
Maximum contact resistance: 50Ω
Maximum current: 100mA
Connector: DuPont 3p female
Number of buttons: 2
Button color: Red and ..
€1.10
Ex Tax:€0.91
Model: MEMKEY3-REDYELGRN
A membrane keypad with double-sided tape on the back with which the keypad can be mounted.
Specifications:
Maximum contact resistance: 50Ω
Maximum current: 100mA
Connector: DuPont 4p female
Number of buttons: 3
Button color: Red, yel..
€1.20
Ex Tax:€0.99
Model: MEMKEY4-REDYELGRN
A membrane keypad with double-sided tape on the back with which the keypad can be mounted.
Specifications:
Maximum contact resistance: 50Ω
Maximum current: 100mA
Connector: DuPont 5p female
Number of buttons: 4
Button color: Red, yel..
€1.50
Ex Tax:€1.24