Model: SWITCH6P8MMRST
A standard reset switch on the PCB...
€0.20
Ex Tax:€0.17
Model: PCBSMDSWITCH3x6x2.5MM
See images for information...
€0.20
Ex Tax:€0.17
Model: PCBSMDSWITCH4x4x0.8MM
See images for information...
€0.20
Ex Tax:€0.17
Model: PCBSMDSWITCH4x4x1.5MM
See images for information...
€0.20
Ex Tax:€0.17
Model: PS2JOYST
A joystick, consisting of two potentiometers and one button.
The pins speak for themselves (just treat them like a normal potmer)...
€2.50
Ex Tax:€2.07
Model: BTNMODRED
This module has a standard push button ("reset" function) and is easy to use. The "OUT" pin becomes high when the button is pressed. Also, a pull-down resistance present as such it can be connected directly without requiring extra components.
See ..
€1.25
Ex Tax:€1.03
Model: RAK-100064
A rotary encoder module from RAKwireless for the modular WisBlock system...
€7.25
Ex Tax:€5.99
Model: PBS-110
A push button that can be used as a reset button. The button springs back after being pressed (no on/off switch)...
€0.50
Ex Tax:€0.41
Model: PBS-33B-RED
A push button that can be used as a reset button. The button springs back after being pressed (no on/off switch)...
€0.65
Ex Tax:€0.54
Model: AB6Y-A-RED
A push button that can be used as an on/off button. After pressing the button, the button will remain in a different position (lower or higher)...
€2.50
Ex Tax:€2.07
Model: AB6Y-A-6.3V-RED
A push button with LED that can be used as an on/off button. After pressing the button, the button will remain in a different position (lower or higher). The LED is double such that the polarity does not matter, it also comes with a built-in series r..
€3.00
Ex Tax:€2.48
Model: AB6Y-M-RED
A push button that can be used as a reset button. The button springs back after being pressed (no on/off switch)...
€2.50
Ex Tax:€2.07
Model: AB6Y-M-6.3V-RED
A push button with LED that can be used as a reset button. The button springs back after being pressed (no on/off switch). The LED is double such that the polarity does not matter, it also comes with a built-in series resistor...
€3.00
Ex Tax:€2.48
Model: ROTENC
A rotary encoder with 20 steps per revolution. Rotary encoders are widely used in volume controls.
This rotary encoder can rotate and does not have, like almost all potentiometers, a start and end position.
However, rotary encoders must be read dig..
€0.75
Ex Tax:€0.62
Model: ROTARYENCMOD
A rotary encoder module that can be used, for example, to create a select or scroll button. The big advantage of a rotary encoder compared to a potentiometer is that there is no start and end position and that it can be read in which direction is tur..
€1.50
Ex Tax:€1.24
Model: ROTARYSWITCH1X11
A standard rotary switch...
€1.50
Ex Tax:€1.24
Model: ROTARYSWITCH2X6HOLE
A standard rotary switch with holes in the pins..
€1.50
Ex Tax:€1.24
Model: ROTARYSWITCH4X3
A standard rotary switch.
Specifications:
Maximum voltage: 30V DC
Maximum current: 0.3A
Number of poles: 4
Number of positions: 3
Lifespan: ~10000 cycles
Dimensions: See images
Package contents:
1x Rotary Switch - ..
€1.50
Ex Tax:€1.24
This module consists of two push buttons. ..
€4.50
Ex Tax:€3.72
Model: SK12D07VG3
A switch that you can put on a printed circuit board.
This switch is very small and not suitable for high currents.
There are 3 pins available. The middle pin is connected with the pin on the side where the switch is set.
This variant is turned 90..
€0.20
Ex Tax:€0.17
Model: SWITCHPCB
A switch that you can put on a printed circuit board or breadboard.
This switch is very small and not suitable for high currents.
There are 3 pins available. The middle pin is connected with the pin on the side where the switch is placed.
Suitab..
€0.20
Ex Tax:€0.17
Model: SWITCHPCB90D
A switch that you can put on a printed circuit board or breadboard.
This switch is very small and not suitable for high currents.
There are 3 pins available. The middle pin is connected with the pin on the side where the switch is placed.
Suitab..
€0.25
Ex Tax:€0.21
Model: SWITCHS
A switch that can be build in various applications. The "I" and "O" indicate the ON and OFF position. The switch has 2 pins and is thus capable of switching 1 wire.
Suitable for 250VAC - 3A.
Dimensions: 8.5 x 13.5mm..
€0.45
Ex Tax:€0.37
Model: SWITCHN
A switch that can be build in various applications. The "I" and "O" indicate the ON and OFF position. The switch has 2 pins and is thus capable of switching 1 wire.
Suitable for 250VAC - 6A.
Dimensions: 12 x 19mm..
€0.50
Ex Tax:€0.41
Model: TACT
This standard switch is enough for various applications.
Priced per piece...
€0.10
Ex Tax:€0.08
Model: LS12x12BLUE
A tactile push button switch with built-in blue LED.
Specifications button:
Maximum voltage: DC 12V
Maximum current: 50 mA
Size: 12mm*12mm*7.3mm
4 Pin layout
Specifications built-in LED:
Voltage drop: 2.5V
Maximum current:..
€0.60
Ex Tax:€0.50
Model: LS12x12GREEN
A tactile push button switch with a built-in green LED.
Specifications button:
Maximum voltage: DC 12V
Maximum current: 50 mA
Size: 12mm*12mm*7.3mm
4 Pin layout
Specifications built-in LED:
Voltage drop: 1.8V
Maximum curre..
€0.60
Ex Tax:€0.50
Model: LS12x12RED
A tactile push button switch with a built-in red LED.
Pinout LED:
Not marked: Plus/anode
Marked red: Min/cathode
See the images for more information about the dimensions...
€0.60
Ex Tax:€0.50
Model: LS12x12ORANGE
A tactile push button switch with a built-in orange LED.
Pinout LED:
Not marked: Plus/anode
Marked red: Min/cathode
See the images for more information about the dimensions...
€0.60
Ex Tax:€0.50
Model: LS12x12WHITE
A tactile push button switch with built-in white LED.
Specifications button:
Maximum voltage: DC 12V
Maximum current: 50 mA
Size: 12mm*12mm*7.3mm
4 Pin layout
Specifications built-in LED:
Voltage drop: 2.8V
Maximum current..
€0.60
Ex Tax:€0.50
Model: TACT12X12X7.3MM
A standard tactile button on which a cap can be mounted: Caps..
€0.25
Ex Tax:€0.21
Model: TACT15MM
This standard button is enough for many applications...
€0.20
Ex Tax:€0.17
Model: TACT6MM
This standard switch is enough for many applications.
Price is per piece...
€0.10
Ex Tax:€0.08
Model: TACT9MM
This standard button is enough for many applications.
Price is er piece...
€0.15
Ex Tax:€0.12
Model: 5X-TACT12X12X7.3MM-KEYCAP-SET
A set of 5 tactile momentary pushbuttons and 5 keycaps, 4x arrows and 1x OK, for example like on a TV remote. The keycaps click onto the buttons. The buttons are a standard 12x12x7.3mm 4-pin variant...
€3.00
Ex Tax:€2.48
Model: ETEN-1021
A switch with a lever that you can build in.
The switch has 2 pins and can be used as an on-off switch.
This is an ON-OFF switch.
See image for dimensions.
Suitable for 250VAC - 5A (15A peak)...
€1.75
Ex Tax:€1.45
Model: ETEN-1121
A switch with a lever that you can build in.
The switch has 3 pins and can therefore switch 2 wires.
The middle pin can, depending on the position of the switch, be connected to one of the outer pins.
This is an ON-ON switch.
See image ..
€1.75
Ex Tax:€1.45
Model: ETEN-1122
A switch with a lever that you can build in.
The switch has 3 pins and can therefore switch 2 wires.
This is an ON-OFF-ON switch.
See image for dimensions.
Suitable for 250VAC - 5A (15A peak)...
€1.75
Ex Tax:€1.45