Menu
Your Cart

Accessories

B-STOCK - Joystick Shield with NRF24 and Bluetooth adapter
B-Stock
Model: JOYSTICKSHIELD-BSTOCK
NOTE: This product is a B-Stock variant of our following product: Joystick Shield with NRF24 and Bluetooth adapter. B-Stock products are products that can no longer be sold normally due to a certain defect. In this case, the bluetooth and I2C connectors on the module are missing. It is therefore ..
€3.00
Ex Tax:€2.48
Model: JOYSTICKSHIELD
This shield has four handy buttons and a joystick. There are also pins available to easily connect your NRF24L01 or Bluetooth (HC-06) module to your Arduino. Specifications: Joystick with push button present in combination with four pushbuttons All pins with which the parts are connected ..
€5.00
Ex Tax:€4.13
Model: NANOEXPAN
A board to make the pins of an Arduino Nano slightly more accessible. On the DC jack a voltage of 7-12V can be offered, up to 500mA current. The Nano must be placed so that the USB connector of the Nano is on the same side as the DC jack connection...
€5.00
Ex Tax:€4.13
Model: SCREWBOARDNANO
With this Screw Board you can easily screw the wires to the pins on Nano-layout compatible boards. All available pins on the screw terminals have a pin description on the PCB. Note: This product still has to be soldered!..
€3.00
Ex Tax:€2.48
Model: OS-NANOIOEXPBOARD
This Open-Smart Nano IO Expansion Board is a shield for the Arduino (Or Arduino compatible) Nano, with which you can give the Nano an Uno layout. In addition to the Uno layout, all Digital I/O pins and Analog pins have an extra pin, and 5V and GND have multiple pins to use. There are also extra pins..
€6.00
Ex Tax:€4.96
Orange Pi Zero Expansion Board
On request
Model: OPZEROEXPANSIONBOARD
An expansion board Orange Pi Zero, with this expansion board the following components are added to your Orange Pi Zero: 2x USB 2.0 ports 1x 3.5 mm jack port (audio) 1x IR receiver 1x microphone Dimensions: 41.5x39mm. Also seperate cases are sold for the combination of an Orange P..
€4.50
Ex Tax:€3.72
Model: RPIGPIOEXTBOARDKIT
A GPIO extension kit so you can easily use the Raspberry Pi pins on a breadboard. The GPIO Extension Board has the pins in the same order as the Raspberry Pi and has pin indications on the GPIO extension board. The kit consists of a 40-cm cable that can be connected to the Raspberry Pi and the G..
€4.50
Ex Tax:€3.72
Model: RDJOYSTICKSHIELD
This shield has four handy buttons and a joystick. There are also pins available to easily connect your NRF24L01 or Xbee module to your Arduino. Specifications: Joystick with push button present in combination with four colored pushbuttons All pins to which the parts are connected are s..
€6.00
Ex Tax:€4.96
Model: RDNANOIOWIRELESS
This board gives you the possibility to connect various wireless boards to your Arduino Nano. The board supports the nRF24L01(+), ESP8266 ESP-01(S), APC220 and xBee modules. In addition, the board has separate pins with power supply next to it, making the board plug and play. The board also has..
€5.00
Ex Tax:€4.13
Model: RAMPSFANEXT
This module offers the possibility to connect two fans to the Ramps 1.4 3D Printer Control Board, and also to control them with a PWM signal. Specifications: Input voltage: 5-20VDC Maximum current per channel: 500mA Number of fan connections: 2 PWM pins: D6 and D11 For more infor..
€4.00
Ex Tax:€3.31
Model: SCREWSHIELDMEGA
With this Screw Shield you can easily screw the wires to the pins on Mega-layout compatible boards. All available pins on the screw terminals have a pin description on the PCB. Note: The screw terminals still need to be soldered to the board...
€15.00
Ex Tax:€12.40
Model: SCREWSHIELDMEGASOLD
With this Screw Shield you can easily screw the wires to the pins on Mega-layout compatible boards. All available pins on the screw terminals have a pin description on the PCB...
€20.00
Ex Tax:€16.53
Screw Shield V2 - Uno compatible
2-4 Weeks
Model: SCREWSHIELDV2
With this Screw Shield you can easily screw the wires to the pins on Uno-layout compatible boards. All available pins on the screw terminals have a pin description on the PCB. Note: This board has the SDA and SCL pins as pins, but these are not connected to one of the screw terminals!..
€5.00
Ex Tax:€4.13
Model: SEEED-103030000
With this shield for the Seeeduino/Arduino Uno you provide the microcontroller with 16 Grove connectors. With the Grove connectors other Seeed Studio modules can be easily connected. Grove connectors types: 4x I2C Grove connector 1x UART Grove connector 4x Analog Grove connector ..
€4.50
Ex Tax:€3.72
Model: SEEED-103030356
This Expansion Board for the Seeeduino XIAO provides the microcontroller with a variety of accessories. For example, the board has an OLED display, a buzzer and a microSD card adapter. In addition, the module also contains a connection for a Li-ion/Li-Po battery, and an on-off switch that makes thi..
€15.00
Ex Tax:€12.40
Model: SEEED-103100124
With this shield for the Seeeduino Nano/Arduino Nano you provide the microcontroller with 8 Grove connectors. With the Grove connectors other Seeed Studio modules can be easily connected. Specifications: 1x I2C Grove connector 1x UART Grove connector 3x Analog Grove connector ..
€3.00
Ex Tax:€2.48
Model: SEEED-103020312
This Grove shield for the Seeeduino XIAO provides the microcontroller with 8 Grove connectors. Via the Grove connectors, other modules from Seeed Studio can easily be connected. In addition, the shield also contains a connection for a Li-ion/Li-Po battery, and an on-off switch that makes this b..
€6.00
Ex Tax:€4.96
Model: TEENSYAUDIOBOARD-4.0
With this adapter you can add 16-bit high-quality stereo audio to your project in combination with a Teensy 4.0. In addition to a stereo audio output, this module also has a mono microphone input for recording sound. (Microphone not included) For more information, see this page: Audio Adapter B..
€16.00
Ex Tax:€13.22
Model: OCTOWS2811
With this adapter thousands of WS2811/WS2812 (B) LEDs can be controlled with a single Teensy 3.2. For more information, see this page: Teensy 3.2 OctoWS2811 Adapter Note: The OctoWS2811 Adapter is shown with the Teensy 3.2. The Teensy 3.2 is not included with this product! In addition, no pi..
€13.00
Ex Tax:€10.74
Model: TEENSYPT8211KIT
The Teensy PT8211 Audio Kit is a DIY digital to analog (DAC) converter shield for the Teensy 3.x. The PT8211 chip is a 16 bit DAC and provides a line-level output signal. This means that the signal is not intended to connect speakers directly, but an amplifier. This product comes with loose ..
€5.00
Ex Tax:€4.13
Model: TEENSYWIZ820SDCARD
With this adapter you can connect a WIZ820io or WIZ850io ethernet module and/or a micro SD card to your Teensy. For more information, see this page: WIZ820io & Micro SD Card Adapter Note: This product does not include pin headers...
€8.00
Ex Tax:€6.61
Model: WS-15082
A Waveshare E-Paper shield for Arduino. This allows you to connect different Waveshare e-Paper/E-ink displays to an Arduino (compatible) microcontroller. Specifications: Supply voltage: 3.3-5V DC Signal voltage: 3.3-5V Interface: SPI Compatible with Arduino Built-in Micro SD card ad..
€7.00
Ex Tax:€5.79
Model: WMD1CONSHIELD
A shield for the (Wemos) D1 mini with a TFT connector, two I2C connectors and an IO connector. With this shield you can easily connect a TFT display or make I2C connections. The cables are not included, but are sold separately: TFT cable I2C/IO cable Pin headers are included with the..
€2.00
Ex Tax:€1.65
Model: XBEESHIELDV3
A Xbee V3 adapter shield for an Arduino. With this shield your Arduino can communicate with other Xbee/Zigbee modules. Xbee module is not included. The switch on the shield can be used to switch between USB and the Xbee module.(switch RX and TX) Compatible with: Series 1 Series..
€4.50
Ex Tax:€3.72
Showing 1 to 24 of 24 (1 Pages)
1
false
false
true
Remove
Change
tr