Model: RAK-110085
A base module from RAKwireless for the modular WisBlock platform. The WisBlock Mini Base board connects a WisBlock Core and up to 2 WisBlock Modules. This version has a power slot, making the module flexible in terms of power supply options.
Note:..
€9.25
Ex Tax:€7.64
Model: RAK-110086
A base module from RAKwireless for the modular WisBlock platform. This version has a power slot, making the module flexible in terms of power supply options...
€10.25
Ex Tax:€8.47
Model: RAK-110087
A base module from RAKwireless for the modular WisBlock platform. This module connects a WisBlock Core, 2 IO slots and up to 6 WisBlock sensor modules. This version also has a power slot which makes the module flexible in terms of power supply option..
€11.00
Ex Tax:€9.09
Model: RPIGPIOEXTBOARDKIT
A GPIO extension kit so you can easily use the Raspberry Pi pins on a breadboard.
The GPIO Extension Board has the pins in the same order as the Raspberry Pi and has pin indications on the GPIO extension board.
The kit consists of a 40-cm cable t..
€4.50
Ex Tax:€3.72
Model: RPISENSEHATV2
The Sense HAT is an extensive module with numerous sensors made for a Raspberry Pi single board computer (SBC). This V2 version has an additional light (color) sensor.
Note: Because the PCB becomes warm, the temperature sensors will not accurately..
€39.75
Ex Tax:€32.85
Model: RP2040SMEXP
RP2040 SuperMini Expansion Board is an expansion board specially designed for RP2040 SuperMini Development Board. In addition to the convenient pins, the module also has a battery charger.
Note: No RP2040 SuperMini is included...
€4.50
Ex Tax:€3.72
Model: SCREWSHIELDMEGASOLD
With this Screw Shield you can easily screw the wires to the pins on Mega-layout compatible boards.
All available pins on the screw terminals have a pin description on the PCB.
Dimensions: 120 x 77 x 11mm (height measured from bottom of PCB to to..
€10.25
Ex Tax:€8.47
Model: SCREWSHIELDMEGA
With this Screw Shield you can easily screw the wires to the pins on Mega-layout compatible boards.
All available pins on the screw terminals have a pin description on the PCB.
Dimensions (assembled): 120 x 77 x 11mm (height measured from bottom ..
€9.00
Ex Tax:€7.44
Model: SCREWSHIELDNANOSOLDERED
With this pre-soldered shield you can easily screw wires to the pins on boards with the form factor of an Arduino Nano. The pin descriptions are listed on the PCB.
Package contents:
1x Screw Terminal Shield..
€3.50
Ex Tax:€2.89
Model: SCREWBOARDNANO
With this Screw Board you can easily screw the wires to the pins on Nano-layout compatible boards.
All available pins on the screw terminals have a pin description on the PCB.
Note: This product still has to be soldered!
Note: The color of the..
€2.25
Ex Tax:€1.86
Model: SCREWSHIELDV2
With this Screw Shield you can easily screw the wires to the pins on Uno-layout compatible boards.
All available pins on the screw terminals have a pin description on the PCB.
Note: This board has the SDA and SCL pins as pins, but these are not c..
€5.00
Ex Tax:€4.13
Model: SEEED-103030000
With this shield for the Seeeduino/Arduino Uno you provide the microcontroller with 16 Grove connectors. With the Grove connectors other Seeed Studio modules can be easily connected.
Grove connectors types:
4x I2C Grove connector
1x UART&n..
€5.00
Ex Tax:€4.13
Model: SEEED-103030356
This Expansion Board for the Seeeduino XIAO provides the microcontroller with a variety of accessories. For example, the board has an OLED display, a buzzer and a microSD card adapter. In addition, the module also contains a connection for a Li-ion/..
€17.25
Ex Tax:€14.26
Model: SEEED-103030275
A Grove HAT for the Raspberry Pi 4. With this extension of your Raspberry Pi you have access to 15 different Grove connectors. With the help of a built-in MCU (STM32) you also provide the Raspberry Pi with an 8-channel ADC.
Specifications:
S..
€12.50
Ex Tax:€10.33
Model: SEEED-103100124
With this shield for the Seeeduino Nano/Arduino Nano you provide the microcontroller with 8 Grove connectors. With the Grove connectors other Seeed Studio modules can be easily connected.
Specifications:
1x I2C Grove connector
1x UART ..
€3.50
Ex Tax:€2.89
Model: SEEED-103020312
This Grove shield for the Seeeduino XIAO provides the microcontroller with 8 Grove connectors. Via the Grove connectors, other modules from Seeed Studio can easily be connected. In addition, the shield also contains a connection for a Li-ion/Li-..
€6.00
Ex Tax:€4.96
Model: SEEED-103060001
The reTerminal E10-1 is an expansion board for the reTerminal...
€156.00
Ex Tax:€128.93
Model: X1000
This PCIe to M.2 adapter board from SupTronics can be used to connect an NVMe M.2 SSD to the Raspberry Pi 5. The board has built-in vents for possible cooling fans...
€9.00
Ex Tax:€7.44
Model: X1002
This PCIe to M.2 adapter board from SupTronics can be used to, for example, connect an NVMe M.2 SSD to the Raspberry Pi 5...
€10.50
Ex Tax:€8.68
Model: X1010
This PCIe FFC to PCIe x4 slot adapter board from SupTronics can be used to, for example, connect an SSD or GPU to the Raspberry Pi 5. The board also functions as power supply for the Raspberry Pi and PCIe device.
Note: Do not power the module via ..
€18.75
Ex Tax:€15.50
Model: X1012
This PCIe to M.2 adapter board from SupTronics allows, for example, an NVMe M.2 SSD to be connected to the Raspberry Pi 5. The board can also function as power supply via PoE or the DC-jack...
€23.25
Ex Tax:€19.21
Model: X1015
This PCIe to M.2 adapter board from SupTronics can be used to connect an NVMe M.2 SSD to the Raspberry Pi 5...
€10.25
Ex Tax:€8.47
Model: TEENSYAUDIOBOARD-4.0
With this adapter you can add 16-bit high-quality stereo audio to your project in combination with a Teensy 4.0.
In addition to a stereo audio output, this module also has a mono microphone input for recording sound. (Microphone not included)
For..
€15.75
Ex Tax:€13.02
Model: OCTOWS2811
With this adapter thousands of WS2811/WS2812 (B) LEDs can be controlled with a single Teensy 3.2.
For more information, see this page: Teensy 3.2 OctoWS2811 Adapter
Note: The OctoWS2811 Adapter is shown with the Teensy 3.2. The Teensy 3.2 is ..
€12.50
Ex Tax:€10.33
Model: TEENSYPT8211KIT
The Teensy PT8211 Audio Kit is a DIY digital to analog (DAC) converter shield for the Teensy 3.x or 4.x (two PCBs are included, one for 3.x and one fro 4.x). The PT8211 chip is a 16 bit DAC and provides a line-level output signal. This means that the..
€5.00
Ex Tax:€4.13
Model: TEENSYWIZ820SDCARD
With this adapter you can connect a WIZ820io or WIZ850io ethernet module and/or a micro SD card to your Teensy.
For more information, see this page: WIZ820io & Micro SD Card Adapter
Note: This product does not include pin headers...
€8.00
Ex Tax:€6.61
Model: EC-01
This board can be used to develop with the EdgeS3[D] (and future Edge products) either as a temporary setup, or as a way to use EdgeS3[D] as a development board.
The Edge Carrier board is perfect to combine with the EdgeS3[D].
Note: EdgeS3[D] i..
€17.75
Ex Tax:€14.67
Model: SH-I2C
This I2C breakout module that can be used as a shield for the TinyPICO, TinyS2, TinyS3, TinyC6 and ProS3. The power supply of one of the two I2C channels can be switched on or off using a GPIO pin of the microcontroller...
€7.50
Ex Tax:€6.20
New
Model: OMGUSB
A USB-C breakout module from Unexpected Maker for programming the OMGS3. Pogo pins are included, which can be soldered onto the programming module; these pins can then be pressed against the OMGS3 to program it.
Note: The OMGUSB does not contain a..
€10.75
Ex Tax:€8.88
Model: WALTERFEELS
The Walter Feels is a carrier board for the Walter ESP32-S3 IoT Development Board and is equipped with several sensors and communication interfaces...
€142.75
Ex Tax:€117.98
Model: WS-19343
Note: No Raspberry Pi Pico or other modules are included...
€7.00
Ex Tax:€5.79
Model: WS-15082
Brand: Waveshare
A Waveshare E-Paper shield for Arduino. This allows you to connect different Waveshare e-Paper/E-ink displays to an Arduino (compatible) microcontroller.
Specifications:
Supply voltage: 3.3-5V DC
Signal voltage: 3.3-5V
Interface: SPI
C..
€14.00
Ex Tax:€11.57
Model: WS-24794
..
€122.00
Ex Tax:€100.83
On request
Model: WS-20785
Brand: Waveshare
Note: Raspberry Pi Compute Module and 4G module are not included.
Note: This product may only be used for business research and development or industrial applications...
€94.00
Ex Tax:€77.69
Model: WS-18606
Brand: Waveshare
Note: No Raspberry Pi Compute Module is included...
€40.00
Ex Tax:€33.06
Model: WS-26583
This PCIe to M.2 adapter board from Waveshare can be used to connect an NVMe M.2 SSD to the Raspberry Pi 5. The board has built-in vents for possible cooling fans and contains a power monitoring chip.
Note: Raspberry Pi 5 and SSD are not included...
€8.50
Ex Tax:€7.02
Model: WS-20016
Brand: Waveshare
Note: No Raspberry Pi Compute Module is included...
€60.00
Ex Tax:€49.59
2-4 Weeks
Model: WS-22849
Brand: Waveshare
Note: No Raspberry Pi CM4 module, SSD and 18650 batteries are included. A power adapter is included...
€89.00
Ex Tax:€73.55
Model: WS-19361
Note: No Raspberry Pi Pico or other modules are included...
€9.00
Ex Tax:€7.44
Model: WS-22555
Brand: Waveshare
Note: No Raspberry Pi Compute Module is included...
€63.00
Ex Tax:€52.07
Model: WMD1CONSHIELD
A shield for the (Wemos) D1 mini with a TFT connector, two I2C connectors and an IO connector.
With this shield you can easily connect a TFT display or make I2C connections. The cables are not included, but are sold separately:
TFT cable
I..
€2.00
Ex Tax:€1.65
Model: XBEESHIELDV3
A Xbee V3 adapter shield for an Arduino. With this shield your Arduino can communicate with other Xbee/Zigbee modules. Xbee module is not included.
The switch on the shield can be used to switch between USB and the Xbee module.(switch RX a..
€4.50
Ex Tax:€3.72