Model: RAK-100037
A DC motor driver module from RAKwireless for the modular WisBlock system. Theoretically, the driver can also be used for a single stepper motor, but we do not recommend this because the driver has no current limiter...
€7.25
Ex Tax:€5.99
Model: RTKRPIMOTORCONTR
With this HAT for the Raspberry Pi you can control two DC motors.
Specifications:
Input voltage: 4-36V (max 12V recommended due to heat development)
Maximum current: 1A
SN754410 Driver
PWM control possible to control the speed
See..
€12.50
Ex Tax:€10.33
Model: RZ7886
With this DC motor driver you can easily control a motor in two directions. The built-in flyback diodes protect the chip from inductive loads, such as the coils of a motor...
€1.25
Ex Tax:€1.03
Model: SERVOTESTER
With this servo driver you can easily test the correct operation of servo's. The servo tester can test in 3 different methods (choose by 'select' button') :
Manual mode: By adjusting the rotary knob the speed can be adjusted
Neutral mode: The..
€3.00
Ex Tax:€2.48
Model: STPMTREXPBOARD
An individual stepper motor extension board where a stepper motor driver can be installed.
Specifications:
Input voltage (power supply): max. 30V DC
MS1, MS2 en MS3 control jumpers
Control: Direction, speed, enable
Motor connector: JST..
€3.50
Ex Tax:€2.89
Model: TB6600
Easy to set stepper motor control for a bipolar stepper motor .
Specifications:
Voltage range (signals): 3.3-24V
Voltage range (power supply): 9-42V (12-24V recommended)
Maximum current per bridge (adjustable via dipswitch): 0.5A, ..
€9.75
Ex Tax:€8.06
Model: TB6612FNG
A breakout board of a 1A Dual motor driver that is very easy to use.
The pin headers are included. This can be soldered yourself if necessary.
Read more about it here.
Note: This is not an original product of sparkfun, but it functions in such a w..
€4.75
Ex Tax:€3.93
Model: TB67S109DRIVERMOD
This stepper motor driver module can be used separately or in combination with a CNC shield. The motor driver is suitable for motors that require higher currents, such as a Nema 23 stepper motor.
Specifications:
Voltage range: 10-47V
..
€8.00
Ex Tax:€6.61
Discontinued
Model: TMC2130DRIVERMODV1.1
This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer.
This V1.1 has the SPI pins soldered upwards so that they are accessible from above.
Specifications:
Voltage range(VM): 5.5-45V
Volt..
€10.50
Ex Tax:€8.68
Model: TMC2208DRIVERMOD
This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer.
Specifications:
Voltage range(VM): 5.5-36V
Voltage range(VIO): 3.3-5V
Maximum current: 1.2A per phase (continuous, with cooling), ..
€8.00
Ex Tax:€6.61
Model: TMC2209DRIVERMODV4.0
This driver module is almost identical to the TMC2209 Motor Driver Module V3.1, this V4.0 version replaces the original CLK pin with a module type identification pin.
This stepper motor driver module can be used separately or in combination with a..
€8.00
Ex Tax:€6.61
Model: TMC2226DRIVERMODV1.1
This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer. Compared to many other stepper motor drivers, this one has a number of special features, including:
StealthChop2™ technology for qui..
€9.50
Ex Tax:€7.85
Model: ULN2003
The ULN2003 is an array of seven Darlington transistor pairs. With this, a signal can be amplified to 50V and 500mA per channel. The signal pins work with both 3.3V and 5V logic. The built-in flyback diodes protect the chip against inductive loads, s..
€0.50
Ex Tax:€0.41
Model: ULN2003-MODULE
This ULN2003 stepper motor driver module can be used, for example, to control a BYJ48 stepper motor. On the underside of the PCB, there is a solder bridge which connected via a thin trace by default. To add an external on/off button, for instance, th..
€3.00
Ex Tax:€2.48
Model: WS-19764
Brand: Waveshare
A DC motor driver module with 4 channels specially made for the Raspberry Pi Pico. The module has a built-in voltage converter that can power the Raspberry Pi Pico, so there is no need for a separate power supply for the Pico and the motors. Due to t..
€19.50
Ex Tax:€16.12
2-4 Weeks
Model: WS-25514
A bus servo adapter board from Waveshare. This module has a digital servo bus that is suitable for controlling serial bus servos from Waveshare. The STS and SCS series from FeeTech can also be controlled.
Note: According to the markings on the PCB..
€5.75
Ex Tax:€4.75
Model: WS-21593
Brand: Waveshare
A multifunctional control board from Waveshare based on an ESP32. This module has a digital servo bus that is suitable for controlling serial bus servos from Waveshare. The STS and SCS series from FeeTech can also be controlled.
The module comes p..
€15.00
Ex Tax:€12.40
2-4 Weeks
Model: WS-17035
Brand: Waveshare
With this HAT you provide a Raspberry Pi with a 16-channel PWM/servo control via I2C. The HAT is designed for the Raspberry Pi Zero, but also works with other models. In addition, the module can also be used with other microcontrollers such as an Ard..
€15.00
Ex Tax:€12.40
Model: WS-15275
Brand: Waveshare
With this HAT you provide a Raspberry Pi with a 16-channel PWM/servo control via I2C. The HAT is designed for the Raspberry Pi Zero, but also works with other models. In addition, the module can also be used with other microcontrollers such as an Ard..
€12.50
Ex Tax:€10.33
2-4 Weeks
Model: WS-19767
Brand: Waveshare
With this HAT you provide a Raspberry Pi with a 16-channel PWM/servo control.
Note: Raspberry Pi not included!..
€9.50
Ex Tax:€7.85
Model: WS-15669
Brand: Waveshare
With this HAT for Raspberry two stepper motors can be controlled. The module also has a built-in voltage converter that can be used to power the Raspberry Pi.
Specifications:
Supply voltage: 8.2-28V DC (via 5.5mm DC jack)
Signal voltage: 3..
€24.00
Ex Tax:€19.83
Model: ZK-PP2K
A handy PWM controller for driving and testing DC motors. This controller has 2 different operation modes with which the behavior of the DC motor can be set. In addition to the buttons on the front of the screen of this controller, there is another c..
€9.00
Ex Tax:€7.44