Model: AUSCONTACTBLOCK-NC
A contact block from Auspicious. Easily clicks on the large switches from Auspicious.
Specifications:
Contact: Normally closed (NC)
Maximum voltage: 240V AC / 30V DC
Maximum current: 3A
Resistance: 50mΩ (max)..
€1.50
Ex Tax:€1.24
Model: AUSCONTACTBLOCK-NO
A contact block from Auspicious. Easily clicks on the large switches from Auspicious.
Specifications:
Contact: Normally open (NO)
Maximum voltage: 240V AC / 30V DC
Maximum current: 3A
Resistance: 50mΩ (max)..
€1.50
Ex Tax:€1.24
Model: AUSESTOPSW-RED-1NC
This emergency stop switch from Auspicious consists of three parts. The lower part is the contact block, which also determines the electrical specifications of the switch. This part can be replaced by others of the same size. It is also possible to insert one or two additional contact blocks. In the..
€4.00
Ex Tax:€3.31
Model: AUSKEYKSW-1NO1NC
This key switch from Auspicious consists of three parts. The lower part is the contact block, which also determines the electrical specifications of the switch. This part can be replaced by others of the same size. With this switch it is possible to use a total of two contact blocks. In the case of ..
€8.50
Ex Tax:€7.02
Model: AUSSELSW-3WAY-BK-2NO
This selector switch from Auspicious consists of three parts. The lower part is the contact block, which also determines the electrical specifications of the switch. This part can be replaced by others of the same size. With this switch it is possible to use a total of two contact blocks. In th..
€4.00
Ex Tax:€3.31
B-Stock
Model: JOYSTICKSHIELD-BSTOCK
NOTE: This product is a B-Stock variant of our following product: Joystick Shield with NRF24 and Bluetooth adapter.
B-Stock products are products that can no longer be sold normally due to a certain defect. In this case, the bluetooth and I2C connectors on the module are missing. It is therefore ..
€3.00
Ex Tax:€2.48
Model: SWITCHS
A switch that can be build in various applications. The "I" and "O" indicate the ON and OFF position. The switch has 2 pins and is thus capable of switching 1 wire.
Suitable for 250VAC - 3A.
Dimensions: 8.5 x 13.5mm..
€0.45
Ex Tax:€0.37
Model: SWITCHN
A switch that can be build in various applications. The "I" and "O" indicate the ON and OFF position. The switch has 2 pins and is thus capable of switching 1 wire.
Suitable for 250VAC - 6A.
Dimensions: 12 x 19mm..
€0.50
Ex Tax:€0.41
Model: PBS-110-BLACK
Specifications:
Max current: 1A
Contact: Normally open (NO)
Color: Black
Dimensions: See image..
€0.50
Ex Tax:€0.41
Model: PBS-33B-BLACK
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 1A (250V), 3A (<125V)
Hole for mounting: 12mm
See the images for information on the dimensions...
€0.65
Ex Tax:€0.54
Model: AB6Y-A-BLACK
A push button that can be used as an on-off button. After pressing the button the button remains in a different position (lower or higher)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Pin descriptions:
NC: Normally Closed (connected to the..
€2.50
Ex Tax:€2.07
Model: AB6Y-M-BLACK
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Pin descriptions:
NC: Normally Closed (connected to the..
€2.50
Ex Tax:€2.07
Model: PBS-110-BLUE
Specifications:
Max current: 1A
Contact: Normally open (NO)
Color: Blue
Dimensions: See image..
€0.50
Ex Tax:€0.41
Model: PBS-33B-BLUE
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 1A (250V), 3A (<125V)
Hole for mounting: 12mm
See the images for information on the dimensions...
€0.65
Ex Tax:€0.54
Model: AB6Y-A-BLUE
A push button that can be used as an on-off button. After pressing the button the button remains in a different position (lower or higher)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Pin descriptions:
NC: Normally Closed (connected to the..
€2.50
Ex Tax:€2.07
Model: AB6Y-A-6.3V-BLUE
A push button that can be used as an on-off button. After pressing the button the button remains in a different position (lower or higher)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Has built-in LED lighting that works on 6.3V. (..
€3.00
Ex Tax:€2.48
Model: AB6Y-M-BLUE
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Pin descriptions:
NC: Normally Closed (connected to the Common if the button is no..
€2.50
Ex Tax:€2.07
Model: AB6Y-M-6.3V-BLUE
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Has built-in LED lighting that works on 6.3V. (3.3V and 5V also possible, but then the..
€3.00
Ex Tax:€2.48
Model: BBTACT
This variant is ideal for use with a breadboard and very handy to use, because the somewhat long and straight pins.
Besides that, this button only has 2 pins, and can prevent confusion compared to the normal 4 pin verison.
Price is per piece...
€0.15
Ex Tax:€0.12
Model: SS22G08
A switch that you can build in.
Specifications:
ON-OFF switch
Suitable for 250VAC - 3A, 50VDC - 3A
Two mounting holes for M2.5 screws
See images for dimensions.
Note: The height of the plastic slider can differ from the photo. The current photo shows a variant with a relatively ..
€0.60
Ex Tax:€0.50
Model: SS23F19
A switch that you can build in.
Specifications:
ON-OFF-ON switch
Suitable for 250VAC - 3A, 50VDC - 0.5A
Two mounting holes for M3 screws
See images for dimensions...
€0.60
Ex Tax:€0.50
Model: STARTCOMPKIT
This component kit contains a number of standard components including:
30x 100Ω resistance
30x 1kΩ resistance
30x 4.7Ω resistance
30x 10kΩ resistance
30x 47kΩ resistance
30x 100kΩ resistance
30x 1MΩ resistance
2x 10kΩ Potentiometer
..
€5.00
Ex Tax:€4.13
Model: DIPSWITCH2
A DIP switch is often used to change settings in hardware. The DIP switch with 8 positions is often used as a 1 byte address (8 bits) in wireless system. lingen hardwarematig aan te geven.
If the switch is up (towards "ON") the pins are connected...
€0.40
Ex Tax:€0.33
Model: DIPSWITCH4
A DIP switch is often used to change settings in hardware. The DIP switch with 8 positions is often used as a 1 byte address (8 bits) in wireless system. lingen hardwarematig aan te geven.
If the switch is up (towards "ON") the pins are connected...
€0.50
Ex Tax:€0.41
Model: DIPSWITCH8
A DIP switch is often used to change settings in hardware. The DIP switch with 8 positions is often used as a 1 byte address (8 bits) in wireless system. lingen hardwarematig aan te geven.
If the switch is up (towards "ON") the pins are connected...
€0.60
Ex Tax:€0.50
Model: PBS-110-GREEN
Specifications:
Max current: 1A
Contact: Normally open (NO)
Color: Green
Dimensions: See image..
€0.50
Ex Tax:€0.41
Model: PBS-33B-GREEN
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 1A (250V), 3A (<125V)
Hole for mounting: 12mm
See the images for information on the dimensions...
€0.65
Ex Tax:€0.54
Model: AB6Y-A-GREEN
A push button that can be used as an on-off button. After pressing the button the button remains in a different position (lower or higher)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Pin descriptions:
NC: Normally Closed (connected to the..
€2.50
Ex Tax:€2.07
Model: AB6Y-A-6.3V-GREEN
A push button that can be used as an on-off button. After pressing the button the button remains in a different position (lower or higher)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Has built-in LED lighting that works on 6.3V. (3.3V and 5V ..
€3.00
Ex Tax:€2.48
Model: AB6Y-M-GREEN
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Pin descriptions:
NC: Normally Closed (connected to the Common if the button is no..
€2.50
Ex Tax:€2.07
Model: AB6Y-M-6.3V-GREEN
A push button that can be used as "reset" button. The button springs back after pressing it. (no on-off switch)
Specifications:
Maximum voltage: 250V
Maximum current: 3A (250V), 5A (30V)
Hole for mounting: 16mm
Has built-in LED lighting that works on 6.3V. (3.3V and 5V also possible, but then the..
€3.00
Ex Tax:€2.48
Model: JOYSTICKSHIELD
This shield has four handy buttons and a joystick. There are also pins available to easily connect your NRF24L01 or Bluetooth (HC-06) module to your Arduino.
Specifications:
Joystick with push button present in combination with four pushbuttons
All pins with which the parts are connected ..
€5.00
Ex Tax:€4.13
Model: KEY1x4
This handy keypad with 1x4 matrix buttons can be used to select a mode for example.
There are many applications possible!
Electronic features:
Circuit works with maximum: 35V (DC), 100mA or 1W
Contact resistance: 10Ω ~ 500Ω (Varies in relation to resistances in used wires and..
€1.50
Ex Tax:€1.24
Model: MEMKEY3x4
This handy keypad with 3x4 matrix buttons can be used to enter a pin code, for example, or to set a clock.
The keypad has membrane switches and all buttons are numbered from 0-9, and the characters * and #.
The module is very suitable for installation. There are four 2mm holes for mounti..
€4.00
Ex Tax:€3.31
Model: KEY4x4
This handy keypad with a 4x4 matrix of buttons can be used to, for example, input a pincode or set up a clock.
There are a lot of possibilities!
Electric characteristics:
Circuit works with a maximum of: 35V (DC), 100mA or 1W
Contact resistance: 10Ω ~ 500Ω (Varies..
€2.00
Ex Tax:€1.65
Model: MEMKEY4x4
This handy keypad with 4x4 matrix buttons can be used to enter a pin code, for example, or to set a clock.
The keypad has membrane switches and all buttons are numbered from 0-9, letters A, B, C and D, and the characters * and #.
The module is very suitable for installation. There a..
€4.50
Ex Tax:€3.72
Model: KEY4x4MICROPCB
A 4x4 matrix keypad consisting of microswitch buttons. The module has four holes 3mm (M3) holes for mounting.
The pin designations on each PCB are shown on each PCB. Four pins are thus used as a 'x' coordinate and the other 4 as a 'y' coordinate.
The module is already equipped with ..
€1.00
Ex Tax:€0.83
Model: KEY4x4TACTPCB
A 4x4 matrix keypad consisting of tactile switch buttons.
Four pins are thus used as 'x' coordinate and the 4 others as 'y' coordinate.
The module is already equipped with a soldered series of pinheaders.
Dimensions: 42 x 40 x 8mm (excluding pin headers)
This ..
€1.50
Ex Tax:€1.24
Model: PBS-32-2-BLUE
A large push button that can be used as a "reset" button. The button springs back after pressing it (no on-off switch). In addition, this button can be mounted in both a 24mm and 40mm hole. This can be chosen with the supplied plastic mounting parts.
Specifications:
Maximum voltag..
€3.50
Ex Tax:€2.89
Model: PBS-32-2-GREEN
A large push button that can be used as a "reset" button. The button springs back after pressing it (no on-off switch). In addition, this button can be mounted in both a 24mm and 40mm hole. This can be chosen with the supplied plastic mounting parts.
Specifications:
Maximum voltag..
€3.50
Ex Tax:€2.89
Model: PBS-32-2-RED
A large push button that can be used as a "reset" button. The button springs back after pressing it (no on-off switch). In addition, this button can be mounted in both a 24mm and 40mm hole. This can be chosen with the supplied plastic mounting parts.
Specifications:
Maximum voltag..
€3.50
Ex Tax:€2.89
2-4 Weeks
Model: PBS-32-2-WHITE
A large push button that can be used as a "reset" button. The button springs back after pressing it (no on-off switch). In addition, this button can be mounted in both a 24mm and 40mm hole. This can be chosen with the supplied plastic mounting parts.
Specifications:
Maximum voltag..
€3.50
Ex Tax:€2.89
Model: PBS-32-2-YELLOW
A large push button that can be used as a "reset" button. The button springs back after pressing it (no on-off switch). In addition, this button can be mounted in both a 24mm and 40mm hole. This can be chosen with the supplied plastic mounting parts.
Specifications:
Maximum voltag..
€3.50
Ex Tax:€2.89
Model: LILYPADONOFFSWITCH
An on/off switch specifically for LilyPad products...
€2.50
Ex Tax:€2.07
Model: LILYPADPUSHBUTTON
A standard push button especially for LilyPad products...
€2.00
Ex Tax:€1.65
Model: M5STACK-U027
The Button Unit is a pushbutton module from M5Stack.
Specifications:
Pushbutton
2x LEGO® compatible holes
1x Grove interface
Package content:
1x M5Stack Button Unit
1x Grove cable
For more information, see: M5STACK Button Unit
..
€3.50
Ex Tax:€2.89
Model: M5STACK-U077
The M5Stack CardKB Hat is a keyboard module for the M5StickC*.
Specifications:
I2C communication
I2C address: 0x5F
Multi-key support
Designed for use with the M5StickC*
Package contents:
1x CardKB Hat
*Note: The M5StickC is not included
For more information, see: M..
€6.50
Ex Tax:€5.37
Model: M5STACK-U035
The M5Stack CardKB Unit is a keyboard module with a Grove connection for M5Stack. The module works via I2C communication.
Specifications:
I2C communication
I2C address: 0x5F
Multi-key support
2x LEGO® compatible holes
1x Grove connection (1x Grove cable included)
Package co..
€6.50
Ex Tax:€5.37
Model: M5STACK-U025
The Dual-Button Unit is a button module from M5Stack. It has a blue and a red pushbutton.
Specifications:
1x Blue pushbutton
1x Red pushbutton
2x LEGO® holes for mounting
1x Grove interface
Package contents:
1x Dual-Button Unit
1x Grove cable
For more infor..
€4.00
Ex Tax:€3.31
Model: M5STACK-A007
This is an M5Stack FACES joystick module with built-in RGB LEDs.
Specifications:
12 RGB LEDs around the joystick
I2C communication
I2C address: 0x5E
Package content:
1x M5Stack Joystick Module
For more information and specifications, check the FACES Joystick page...
€10.00
Ex Tax:€8.26