Model: DFROBOT-DFR0952
Brand: DFRobot
A step-up converter where the output voltage can be changed by adjusting solder joints, the converter is set to 12V by default. To set a lower voltage, 0Ω resistors can be removed...
€8.50
Ex Tax:€7.02
Model: MT3608
A step-up converter, always useful for a hobby project!
Specifications:
Input voltage: 2V-24V DC*
Output voltage: 5V-28V DC
Output current: 2A (max), 1A (recommended), <100mA (input <4.0V), <50mA (input <3.5V)
Module type: ..
€2.00
Ex Tax:€1.65
Model: MT3608-MICROUSB
A step-up converter, always useful for a hobby project! This is a variant of the standard MT3608 DC-DC module with a micro USB connection. In addition to the micro USB connection, the VIN+ and VIN connections can still be used.
Specifications:
..
€2.00
Ex Tax:€1.65
Model: ADJDCDC-SX1308-2A
An adjustable step-up boost converter, always useful for a hobby project!
Specifications:
Input voltage: 2-24V DC*
Output voltage: 2-28V DC
Output current: 2A (max), 1A (recommended), <100mA (input <4.0V), <50mA (input <3.5V)..
€2.00
Ex Tax:€1.65
Model: XL6009
A step-up converter can be used to easily increase the voltage in an efficient way.
Specifications:
Module type: Non-isolated step-up (Boost)
Rectification: Non-synchronous rectification
Input voltage: 5V-32V
Output voltage: 5V-35V..
€3.50
Ex Tax:€2.89
Model: DCDCBOOST5V2A
A small boost converter with an output voltage of 5V. This converter is ideal to use in combination with a Li-ion or Li-Po battery.
Specifications:
Input voltage: 2.7 - 5V DC*
Output voltage: 5V DC
Maximum output current: 2A
Maximum ou..
€3.00
Ex Tax:€2.48
Model: MH-CD42
This module has a built-in li-ion charge, 5V boost and protection circuit against over and under voltage, over temperature (chip) and short-circuit protection.
Specifications:
Input voltage (Vin): DC 4.5V - 5.5V (5V recommended)
Input curr..
€3.00
Ex Tax:€2.48
Model: LILYPADAAASTEPUP
This module contains a AAA battery holder and a step-up converter that makes the battery voltage a 5V voltage.
The module is also equipped with a polyfuse (self-resetting fuse), so you can never draw too much current from the step-up converter.
Wit..
€5.00
Ex Tax:€4.13
Model: LILYPADLIPOWER
A li-ion or li-po to 5V module especially for LilyPad products.
This module has a connection for a li-ion or li-po battery and has a step-up converter built in which converts the voltage of the battery to 5V.
Pinout:
- pads: common..
€6.00
Ex Tax:€4.96
New
Model: M5STACK-S005
Brand: M5Stack
A power management module from M5Stack including a battery charger and an RTC. The module also has a boost and a buck converter that convert the battery voltage to 5V and 3.3V, respectively. The specifications in the table below refer to the boost co..
€9.50
Ex Tax:€7.85
Model: MINIDCDCBOOST3.3V
A small boost converter with output voltage of 3.3V.
Specifications:
Input voltage range: 0.8 - 3.3V
Output voltage: 3.3V (fixed)
Output current: 400 mA (max)
Efficiency: 85% (max, based on input voltage and output current)
Dim..
€2.00
Ex Tax:€1.65
Model: MINIDCDCBOOST5V
A small boost converter with output voltage of 5V.
Specifications:
Input voltage range: 0.9 - 5V
Output voltage: 5V (fixed)
Output current: 480 mA (max)
Efficiency: ~85%
Dimensions: 11 x 10.5 x 7.5 mm
The maxim..
€2.00
Ex Tax:€1.65
Model: QS-0305-15W
A step-up boost converter with undervoltage protection. This DC-DC converter has a fixed output voltage of 5V.
Specifications:
Module type: Non-isolated step-up (boost)
Input voltage: 3-5V DC
Input undervoltage protection: 2.7V DC (LED i..
€6.00
Ex Tax:€4.96
Model: DC-DC150W
A powerful step-up converter, eg to boost your 12V battery to 24V . For example,to get the most out of your TPA3116 amplifier when using 12V.
Module type: Non-insulated step-up (Boost)
Rectification: Non-synchronous rectification
Input vol..
€6.00
Ex Tax:€4.96
Model: DC-DC150W-CC
A powerful step-up converter with current limiter (adjustable constant current) and undervoltage protection, for example to boost your 12V battery to 24V.
Specifications:
Module type: Non-insulated step-up (Boost)
Rectification: Non-synchr..
€7.00
Ex Tax:€5.79
Unknown
Model: DC-DC1800W-CC
A very powerful adjustable step-up converter with current limitation (adjustable constant current) and undervoltage protection.
Specifications:
Module type: Uninsulated step-up (Boost)
Input voltage: 10V-60VDC
Output voltage: 13V-97VDC (..
€24.00
Ex Tax:€19.83
Model: QS-2448CCBD-600W
A powerful step-up converter with current limiter (adjustable constant current) and undervoltage protection, for example to boost your 12V battery to 24V.
Specifications:
Module type: Non-isolated step-up (Boost)
Rectification: Non-synchro..
€9.50
Ex Tax:€7.85
Model: QS-0524CBDE-15W
An adjustable step-up (boost) converter from QSKJ.
Specifications:
Module type: Non-isolated step-up (boost)
Input voltage: 5-32V DC*
Maximum input current: 4A
Output voltage: 5-50V DC* (adjustable with the potentiometer**)
Maximum o..
€3.50
Ex Tax:€2.89
Model: USBDCDC1000LI-ION
A complete DC-DC converter to boost the Li-ion voltage to 5V USB voltage. This module has a built-in li-ion charge and protection circuit against over- and undervoltage, overtemperature (chip) and short-circuit protection.
This is therefore very s..
€2.50
Ex Tax:€2.07
Model: USBDCDC1200
A DC-DC converter to boost a low voltage to 5V USB voltage.
Specifications:
Range of the input voltage(Vin): 2.0V - 5.0V
Output voltage: 5.1V ± 0.1V
Efficiency: up to 90%, average 85%
Output current: Vin >= 2.0V: 600mA,&..
€2.50
Ex Tax:€2.07
Model: USBDCDC600
A DC-DC converter to boost low voltage to 5V USB voltage.
Specifications:
Range of input voltage (Vin): 0.9V - 5.0V
Output voltage: 5.0V
Efficiency: up to 96%
Output current: Fin> = 0.9V: 100mA, Fin> = 1.5V: 200mA, Fin&..
€1.50
Ex Tax:€1.24
Model: WMD1MBATSHIELD
A shield to power your (Wemos) D1 Mini via a Li-ion/Li-Po battery and also charge it.
The shield has an extra USB connection for charging the Li-ion/Li-Po battery(with JST-PH 2.0mm connector) and can be set to 500mA or 1000mA charging current (see i..
€5.50
Ex Tax:€4.55
Showing 1 to 22 of 22 (1 Pages)