Menu
Your Cart

BMS and Chargers

Model: 18650BATMODV3
This module contains a 1x 18650 battery holder that can be charged with the existing micro USB port, and can supply power with the existing USB-A port. Handy for powering your Arduino, Raspberry Pi, Wemos, etc. In addition to the available USB port, this module also contains 3x 3.3V and 3x 5V connec..
€4.50
Ex Tax:€3.72
Model: CL14.4VDC-1.2A
This lead-acid battery charger is suitable for smaller 12V lead-acid battery from around 4Ah to 12Ah and has handy clamps for connecting the battery. Specifications: Voltage (input): 230V AC 50 ~ 60hz Charging voltage (nominal): 14.4V Charging voltage (maximum): 14.7V Charging current..
€10.00
Ex Tax:€8.26
Model: SOLARCHARGERV1
This solar charger is based on the CN3065 chipset. With this module it is possible to connect a solar panel and a Li-ion or Li-Po battery to your project. The solar panel can charge the battery and power the system. A micro USB cable can also be connected to charge the battery (micro USB cable not i..
€4.00
Ex Tax:€3.31
Model: MH-CD42
This module has a built-in li-ion charge, 5V boost and protection circuit against over and under voltage, over temperature (chip) and short-circuit protection. Specifications: Input voltage (Vin): DC 4.5V - 5.5V (5V recommended) Input current: max 2100mA Battery charging voltage: 4.2V&n..
€4.00
Ex Tax:€3.31
Model: CHARGER3S12.6V1A
This charger is suitable for charging a Li-ion/Li-Po battery pack safely. The charger first charges the pack with a constant current (CC) and then switches to a constant voltage (CV). This makes the pack last longer and prevents an empty pack from being charged too quickly. This charger can only be ..
€15.00
Ex Tax:€12.40
Model: CHARGER3S12.6V2A
This charger is suitable for charging a Li-ion/Li-Po battery pack safely. The charger first charges the pack with a constant current (CC) and then switches to a constant voltage (CV). This makes the pack last longer and prevents an empty pack from being charged too quickly. This charger can only be ..
€15.00
Ex Tax:€12.40
Model: CHARGER4S16.8V1.5A
This charger is suitable for charging a Li-ion/Li-Po battery pack safely. The charger first charges the pack with a constant current (CC) and then switches to a constant voltage (CV). This makes the pack last longer and prevents an empty pack from being charged too quickly. This charger can only be ..
€13.50
Ex Tax:€11.16
Model: CHARGER4S16.8V1A
This charger is suitable for charging a Li-ion/Li-Po battery pack safely. The charger first charges the pack with a constant current (CC) and then switches to a constant voltage (CV). This makes the pack last longer and prevents an empty pack from being charged too quickly. This charger can only be ..
€13.00
Ex Tax:€10.74
Li-ion Charger with DC Jack - 4S - 16.8V - 2A
Unknown
Model: CHARGER4S16.8V2A
This charger is suitable for charging a Li-ion/Li-Po battery pack safely. The charger first charges the pack with a constant current (CC) and then switches to a constant voltage (CV). This makes the pack last longer and prevents an empty pack from being charged too quickly. This charger can only be ..
€22.00
Ex Tax:€18.18
Model: BMS3S25A
A Battery Management System (BMS) for a 3S battery pack. With this circuit you can safely make a battery pack of 3 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage. In addition, the circuit ensures that the batteri..
€4.50
Ex Tax:€3.72
Model: BMS4S30A
A Battery Management System (BMS) for a 4S battery pack. With this circuit you can safely make a battery pack of 4 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage. In addition, the circuit ensures that the batteri..
€5.00
Ex Tax:€4.13
Model: LIPOPROTECTPCB
A compact li-ion/li-po protection circuit for 1 cell. Specifications: Voltage overcharge protection: 4.25 ± 0.05V Voltage release protection: 4.23 ± 0.05V Discharge protection: 2.45 ± 0.1V Continuous current (max): 2A Overcurrent protection: ~2.5A Planes on PC..
€1.00
Ex Tax:€0.83
Model: ENELOOPUSBCHARGER-AA-AAA
A USB battery charger from Panasonic Eneloop, suitable for charging up to 4 AA rechargeable batteries at the same time. This charger is ideal for charging our rechargeable Eneloop AA and AAA batteries. The batteries are charged in pairs. Specifications: Supply voltage: 5V DC (via micro USB)..
€10.50
Ex Tax:€8.68
Model: BMS3S25A-2.8-4.25
A Battery Management System (BMS) for a 3S battery pack. With this circuit you can safely make a battery pack of 3 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage.  Specifications: Charging voltage: 12.6V..
€3.50
Ex Tax:€2.89
Model: BMS4S25A-2.8-4.25
A Battery Management System (BMS) for a 4S battery pack. With this circuit you can safely make a battery pack of 4 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage.  Specifications: Charging voltage: 16.8V..
€3.50
Ex Tax:€2.89
Model: BMS5S25A-2.8-4.25
A Battery Management System (BMS) for a 5S battery pack. With this circuit you can safely make a battery pack of 5 series Li-ion/Li-Po batteries (cells). The circuit protects the battery pack against short circuits, overvoltage and undervoltage.  Specifications: Charging voltage: 21.0V..
€3.50
Ex Tax:€2.89
Model: RDTP4056
A fairly simple li-ion charger with mini-USB connection. Specifications: Charging current: 1A (maximum) Maximum charging voltage: 4.2V (1.5% accuracy) Input voltage: 4.5V-5.5V Two LED's indicating the status of loading Micro-USB input or a separate input (IN+ and GND) Output (..
€1.75
Ex Tax:€1.45
Model: RDTP4056PROTECT
A li-ion charger with micro-USB connection in combination with a li-ion protection circuit for too high discharge currents or too low a battery voltage. Specifications: Charging current: 1A (maximum) Maximum charging voltage: 4.2V (1.5% accuracy) Input voltage: 4.5V-5.5V Two LED's..
€2.50
Ex Tax:€2.07
Model: SEEED-106990290
The Seeed Studio Lipo Rider Plus is a module that charges a Li-Po/Li-ion battery via USB-C. The module has a 5V 2.4A USB-A output. Furthermore, the module has 4 LEDs as a battery indicator and it is possible to mount pin headers. Via the pin headers it is possible to also have a 3.3V 250mA output. ..
€6.00
Ex Tax:€4.96
Seeed Studio Lipo Rider V1.3
Discontinued
Model: SEEED-106990022
The Seeed Studio Lipo Rider is a module that charges a Li-Po battery via micro-USB or a connectable solar panel. The module has a 5V USB-A output. See the following page for more information: Lipo Rider V1.3 Note: This module has no battery protection circuit, it is recommended to use one..
€12.00
Ex Tax:€9.92
Model: SEEED-106990020
With this shield for the Seeeduino/Arduino Uno you provide the microcontroller with a Li-Po/Li-ion battery connection and a connection for a solar panel . Furthermore, this shield makes it possible to charge the battery via micro-USB or the solar panel. Features: Short Circuit pro..
€13.00
Ex Tax:€10.74
Model: IMAXB6MINI
This iMAX B6mini is a balance charger/discharger with which you can easily charge different types of batteries. It can be connected to your PC via micro USB (micro USB cable not included) to control it and perform firmware upgrades. Multiple cables with the most common battery connectors are include..
€34.00
Ex Tax:€28.10
Model: SOLREGU1224
Solar panel battery regulator with built-in LCD display. This module regulates charging and discharging of the battery powered by solar panels. Specifications: Built-in micro controller Nominal battery voltage: 12/24V Current (charging): 10A Current (discharging): 10A Maximum input ..
€11.00
Ex Tax:€9.09
Model: TP4056PROTECT
A li-ion charger with micro-USB connection in combination with a li-ion protection circuit for too high discharge currents or too low a battery voltage. Specifications: Charging current: 1A (maximum) Maximum charging voltage: 4.2V (1.5% accuracy) Input voltage: 4.5V-5.5V Two LED's..
€2.00
Ex Tax:€1.65
Model: TP4056
A fairly simple li-ion charger with mini-USB connection. Specifications: Charging current: 1A (maximum) Maximum charging voltage: 4.2V (1.5% accuracy) Input voltage: 4.5V-5.5V Two LED's indicating the status of loading Mini-USB input or a separate input (IN+ and IN -) Output (BAT+ and BAT -) ..
€1.50
Ex Tax:€1.24
Model: TP4056PROTECTUSB-C
A li-ion charger with USB-C connection in combination with a li-ion protection circuit for too high discharge currents or a low battery voltage. Specifications: Charging current: 1A (maximum) Maximum charging voltage: 4.2V (1.5% accuracy) Input voltage: 4.5V-5.5V Two LED's indicat..
€2.50
Ex Tax:€2.07
Model: USBDCDC1000LI-ION
A complete DC-DC converter to boost the Li-ion voltage to 5V USB voltage. This module has a built-in li-ion charge and protection circuit against over- and undervoltage, overtemperature (chip) and short-circuit protection. This is therefore very suitable to make your own power bank! Specificat..
€2.50
Ex Tax:€2.07
Model: WMD1MBATSHIELD
A shield to power your (Wemos) D1 Mini via a Li-ion/Li-Po battery and also charge it. The shield has an extra USB connection for charging the Li-ion/Li-Po battery(with JST-PH 2.0mm connector) and can be set to 500mA or 1000mA charging current (see images and PCB for setting this). The TP5400 chargi..
€4.50
Ex Tax:€3.72
Model: XTARMC1
This compact 1x li-ion cell charger has various functions and can easily be connected via USB (computer or USB charger) as power supply. Specifications: Compatible with various Li-ion cells from 10440 cells up to 26650 (including a 18650 cell) Input voltage: 5V (USB) Input current: 500m..
€4.50
Ex Tax:€3.72
Showing 1 to 29 of 29 (1 Pages)
1
false
false
true
Remove
Change
tr