Menu
Your Cart

Platforms and Systems

Model: M5STACK-K024-B
This is an extensive M5Stack experiment kit with many different modules. This kit includes the M5Core. Furthermore, there are motors, sensors and many more modules all bundled on a large printed circuit board. With the included DuPont cables you..
€148.00
Ex Tax:€122.31
Bitcraze 7mm Coreless DC Motor for Crazyflie 2.X - 4 pieces
2-4 Weeks
Model: SEEED-114990121
This is the standard battery holder deck used in the Crazyflie 2.1 DIY drone. Package contents: 1x Battery Holder Deck..
€6.00
Ex Tax:€4.96
Model: SEEED-114991551
The Crazyflie 2.1 is a versatile open source drone development platform that weighs only 27 grams and fits in the palm of your hand. Not only is it a good flier, the Crazyflie 2.1 is also equipped with a low latency/long range radio and Bluetooth ..
€215.00
Ex Tax:€177.69
Model: SEEED-114990112
..
€34.00
Ex Tax:€28.10
Model: SEEED-114991549
..
€54.00
Ex Tax:€44.63
Model: SEEED-114990114
..
€25.00
Ex Tax:€20.66
Model: SEEED-114992766
This is the standard Li-Po battery for the Crazyflie 2.1 DIY drone is used. Of course, this battery can also be used for other purposes. Specifications: Capacity: 250mAh Rated voltage: 3.7V Charging voltage: 4.2V Maximum discharge curr..
€8.00
Ex Tax:€6.61
Model: SEEED-114992164
These headers are intended to be used with the Crazyflie 2.1 DIY drone expansion deck system. These long headers ensure that you can put up to 3 decks on your Crazyflie. Specifications: Pin distance: 2mm Pin thickness: 0.5mm Pin shape: S..
€3.50
Ex Tax:€2.89
Model: SEEED-110990444
These are the motor mounts for the standard 7mm coreless DC motors used for the Crazyflie 2.1 DIY drone. See the datasheet under the tab "Downloads" for more information. Package contents: 4x Motor mount..
€6.50
Ex Tax:€5.37
Model: SEEED-110990162
These are the propellers for the standard 7mm coreless DC motors used for the Crazyflie 2.1 DIY drone. Package contents: 4x Propeller CW (clockwise) 4x Propeller CCW (counterclockwise)..
€6.50
Ex Tax:€5.37
Model: SEEED-114990115
..
€6.25
Ex Tax:€5.17
Model: SEEED-114991425
This is a spare parts bundle for the Crazyflie 2.1 DIY drone. This bundle is ideal for making sure you always have spare parts in case something needs to be replaced. Package contents: 2x 7mm Coreless DC Motor 8x Motor Mount for 7mm Corele..
€19.50
Ex Tax:€16.12
Model: SEEED-114991550
..
€25.00
Ex Tax:€20.66
Model: M5STACK-U006
This is an expansion hub unit for multiple Grove connections for M5Stack. Note: Data transfer when connecting multiple I2C slave units/modules with the same address can cause problems...
€5.50
Ex Tax:€4.55
M5STACK 1-6 PbHub V1.1 Unit
New
Model: M5STSACK-U041-B
..
€12.00
Ex Tax:€9.92
M5STACK 1.3 Inch Oled Display Unit - I2C
New
Model: M5STACK-U119
..
€15.50
Ex Tax:€12.81
M5STACK 13.56MHz RFID Card-F08 - S50 Compatible - 5 Pieces
New
Model: M5STACK-A073
This M5Stack RFID card is compatible with S50 Mifare readers. Specifications: Operating frequency: 13.56MHz Storage: 1KB Detection distance: <10mm (depending on the reader) Operating temperature: -20 - 50°C Dimensions: 85.5 x 54 x..
€3.00
Ex Tax:€2.48
Model: M5STACK-U080
The 18650C Hat is a base with a built-in 2000mAh Li-ion battery for the M5StickC*. This provides the M5StickC with a much larger battery capacity. The module is built in such a way that another Hat can be placed on it. The battery can be charged via ..
€10.00
Ex Tax:€8.26
Model: M5STACK-U131
..
€9.00
Ex Tax:€7.44
M5STACK 24AWG 4-Core Shielded Cable - 0.2m
New
Model: M5STACK-A088
..
€3.50
Ex Tax:€2.89
M5STACK 24AWG 4-Core Shielded Cable - 0.5m
New
Model: M5STACK-A088-A
A cable and connector set from M5Stack which is well suited for serial communication such as RS-232 or RS-485 due to the shielding...
€4.00
Ex Tax:€3.31
M5STACK 24AWG 4-Core Shielded Cable - 1m
New
Model: M5STACK-A088-B
..
€5.00
Ex Tax:€4.13
M5STACK 24AWG 4-Core Shielded Cable - 5m
New
Model: M5STACK-A088-C
..
€8.50
Ex Tax:€7.02
Model: M5STACK-U003
This is a LED module with 3 RGB LEDs  and a Grove connection for the M5Stack.  Specifications: 3 Individually programmable RGB LEDs 2x LEGO® compatible holes 2x Grove connection (1x Grove cable included) Package conten..
€4.00
Ex Tax:€3.31
M5STACK 4-Relay Module 13.2 - for M5Core
New
Model: M5STACK-M121
..
€19.00
Ex Tax:€15.70
Model: M5STACK-U097
A relay module for M5Stack products. Specifications: Relay: Maximum switching voltage: 250V AC or 28V DC Maximum switching current: Resistive load: 10A Number of channels: 4 Communication: I2C I2C ad..
€12.00
Ex Tax:€9.92
Model: M5STACK-A071
The M5STACK 485T is a T-shape connector for RS485 communication with two detachable 4-pins terminal blocks and a 4-pins terminal plug. This module connects multiple devices to the same RS485 bus. Many M5STACK products are compatible with this connect..
€3.75
Ex Tax:€3.10
Model: M5STACK-U125
This is a buck converter module with a DC jack and a Grove connection from M5Stack. Specifications: Input voltage: 6 - 24V DC Output voltage: 5V DC Maximum output current: 1A Chip: ME3116AM6G Type: Non-isolated buck (step-down) Con..
€5.50
Ex Tax:€4.55
M5STACK AAA Battery Holder Base
New
Model: M5STACK-A122
..
€12.00
Ex Tax:€9.92
Model: M5STACK-U095
This is a 6-axis module with 3-axis accelerometer, 3-axis gyroscope and a Grove connection for M5Stack. The module works via I2C communication. Specifications: Sensor: MPU6886 Gyroscope: 3-axis (x, y, z) Accelerometer: 3-axis (x, y,..
€11.00
Ex Tax:€9.09
Model: M5STACK-U056
This is a 3-axis accelerometer module with a Grove connection for M5Stack. The module works via I2C communication. Specifications: Sensor: ADXL345 3-axis (x, y, z) Resolution: 13-bit Measurements up to ±16g I2C address: 0..
€6.00
Ex Tax:€4.96
Model: M5STACK-U069
This is a module with a 16-bit analog to digital converter for M5StickC. The module works via I2C communication. Specifications: Measuring voltage range: 0~12VDC Chip: ADS1100 Resolution: 16-bit I2C address: 0x48 2x LEGO® compati..
€6.00
Ex Tax:€4.96
Model: M5STACK-U013
This is a module with a 16-bit analog to digital converter for M5Stack. The module works via I2C communication. Specifications: Measuring voltage range: 0~12VDC Chip: ADS1100 Resolution: 16-bit I2C address: 0x48 2x LEGO® compatib..
€6.00
Ex Tax:€4.96
Model: M5STACK-U078
The AI Camera Unit-V is a camera module that runs on a Kendryte K210 chipset. The board has a 64-bit dual-core RISC-V CPU along with an OV2640 on board, which makes for good photos in low light and the ability to combine this with Machine Vision (AI ..
€20.00
Ex Tax:€16.53
M5STACK AI Camera Unit-V - K210 - OV7740
New
Model: M5STACK-U078-C
..
€44.00
Ex Tax:€36.36
Model: M5STACK-U078-D
The AI Camera Unit-V is a Linux-based camera module that runs on a Sigmstar SSD202D chipset. The board has a 32-bit dual-core Cortex-A7 CPU along with a GC2145 camera sensor on board. Together, this makes for great low-light photos and the ability to..
€80.00
Ex Tax:€66.12
M5STACK Ambient Light Sensor Hat - for M5StickC
New
Model: M5STACK-U134
..
€7.50
Ex Tax:€6.20
M5STACK Ambient Light Sensor Unit
New
Model: M5STACK-U136
..
€7.00
Ex Tax:€5.79
Model: M5STACK-U086
This is an isolated current sensor module with a Grove connection for M5Stack. The module contains a 16-bit ADC (analog to digital) converter, namely the ADS1115. The sensor is factory calibrated with the calibration data stored in the built-in EEPRO..
€12.00
Ex Tax:€9.92
Model: M5STACK-U005
This is a potentiometer unit with a Grove connection for the M5Stack.  Specifications: Output voltage range: 0~2.5V 2x LEGO® compatible holes 1x Grove connection (1x Grove cable included) Package content: 1x Potentiom..
€4.00
Ex Tax:€3.31
Model: M5STACK-K057
The Atom CAN Bus Kit is a CAN Bus module from M5Stack. The kit consists of two parts: An M5Stack Atom Lite and the CAN Bus module. With this module, a project can easily be connected to a CAN Bus network. Specifications CAN Bus Module: CAN B..
€21.00
Ex Tax:€17.36
Model: M5STACK-K063
..
€32.00
Ex Tax:€26.45
Showing 1 to 50 of 322 (7 Pages)
1
false
true
true
Remove
Change
tr