Model: CANSHIELD
With this CAN Shield you can make contact with your Arduino with a CAN bus, for example from a car.
The shield uses the MCP2515 CAN Controller chip in combination with the MCP2551 CAN transceiver.
Specifications:
SPI speed up to 10MHz
CAN..
€11.50
Ex Tax:€9.50
Model: DFROBOT-TEL0150
Brand: DFRobot
A CAN to UART and USB adapter module from DFRobot. This module supports CAN 2.0 and SLCAN commands with adjustable baud rate...
€19.50
Ex Tax:€16.12
Model: FISCHL-USBTIN-EB
USBtin is an open source USB to CAN interface for monitoring and transmitting CAN messages. It's easy to use and has a virtual comport on your computer that can be controlled with simple commands...
€37.50
Ex Tax:€30.99
Model: KS0411
A CAN-BUS Shield from Keyestudio for the Arduino Uno (or compatible board)...
€8.00
Ex Tax:€6.61
Model: LILYGO-H559
LilyGO's T-SimHat is an expansion module/HAT for LilyGO's T-SIM series and is suitable for the SIM7000, A7670 and A7608 series. This hat comes with a relay and a connection for CAN and RS485...
€12.50
Ex Tax:€10.33
Model: M5STACK-A103
Brand: M5Stack
This Atom CAN Base module from M5Stack makes it possible for a project to be easily connected to a CAN Bus network...
€8.50
Ex Tax:€7.02
Model: M5STACK-U085
Brand: M5Stack
This is a CANBus module with a HY2.0 4P (Grove) connection for M5Stack. The module works via UART communication.
Specifications:
CAN Bus chip: CA-IS3050G
Maximum number of bus nodes: 110
Maximum transfer speed: 1Mbps
Se..
€14.50
Ex Tax:€11.98
Model: M5STACK-M011
Brand: M5Stack
This is an extension module for the M5Core for more connectivitiy.
It is possible to reassign the pins for the TTL and RS485 connections.
Specifications:
Connectors:
2x I2C
1x CAN
1x RS485
1x TTL;
CAN controller: MC..
€14.50
Ex Tax:€11.98
Model: M5STACK-U179
Brand: M5Stack
A CAN transceiver module from M5Stack. This module does not have a built-in CAN controller, so the development board that is connected to it must have this built-in (e.g. ESP32 modules have this, for example).
The module has a built-in voltage con..
€7.50
Ex Tax:€6.20
Model: MCP2515MOD
An CAN bus controller with MCP2515 chip suitable to connect every standard microcontroller with a CAN bus. Communication goes via an SPI connection.
Specifications:
Input voltage: 5 VDC
Data rate: 1 Mb/s
CAN version 2.0b
The terminatio..
€4.00
Ex Tax:€3.31
Model: DB9TOOBD2CABLE
This cable is suitable for the CAN bus shield and converts the pins of the RS232(DB9) connector to a standard OBD2 connector that is suitable for most cars.
See the images for the pinout...
€6.50
Ex Tax:€5.37
Model: SEEED-103030215
With this CAN bus shield from Seeed Studio you can connect your Arduino Uno (or a compatible variant) to a CAN bus, for example that of a car.
Specifications:
CAN Bus:
Tranceiver chip: MCP2551
Controller chip: MCP2515
Maximum tra..
€31.25
Ex Tax:€25.83
Model: WS-14882
Brand: M5Stack
An RS485 and CAN bus module in one from Waveshare, specially made to use as a HAT in combination with a Raspberry Pi SBC. In addition, this module can also be used separately with another microcontroller via the through hole pins...
€12.00
Ex Tax:€9.92
Model: WS-3945
Brand: M5Stack
With this module you can provide certain microcontrollers with a CAN bus interface. For example, ESP32 based boards have a built-in CAN bus (TWAI) controller...
€4.75
Ex Tax:€3.93
Showing 1 to 15 of 15 (1 Pages)