Menu
Your Cart

Serial and USB - page 2

Model: M5STACK-U034 Brand: M5Stack
This is a module with a TTL to RS485 converter with a Grove connection for M5Stack.  Specifications: TTL to RS485 converter 2x LEGO® compatible holes 1x 4 Pin HT3.96 connection 1x Grove connection (1x Grove cable included) Pa..
€8.00
Ex Tax:€6.61
Model: M5STACK-M020 Brand: M5Stack
The M5Stack USB Module is an expansion for the M5Core. This module adds a USB-port (type A), 10 GPIO pins and 2 power outputs each for 3.3V and 5V to the M5Core.  Specifications: For use with the M5Core MAX3421E Peripheral/Host Contro..
€15.25
Ex Tax:€12.60
Model: M5STACK-M020-V12 Brand: M5Stack
The M5Stack USB Module is an extension for the M5Core based on the MAX3421E. This module expands the M5Core with a USB port (type A) and extra GPIO pins...
€14.50
Ex Tax:€11.98
Model: MCP2515MOD
An CAN bus controller with MCP2515 chip suitable to connect every standard microcontroller with a CAN bus. Communication goes via an SPI connection. Specifications: Input voltage: 5 VDC Data rate: 1 Mb/s CAN version 2.0b The terminatio..
€4.00
Ex Tax:€3.31
Model: OL-ESP-PROG
This ESP32 and ESP8266 programmer with cables from Olimex is suitable for programming the following ESP chips: ESP8266, ESP32, ESP32-S2, ESP32-C3, ESP32-C6. This programmer ensures that the ESP chip automatically enters and exits bootloader mode so t..
€5.50
Ex Tax:€4.55
Olimex ESP32-PROG-C - Programmer for ESP32 and ESP8266
2-4 Weeks
Model: OL-ESP-PROG-C
This ESP32 and ESP8266 programmer with cables from Olimex is suitable for programming the following ESP chips: ESP8266, ESP32, ESP32-S2, ESP32-C3, ESP32-C6. This programmer ensures that the ESP chip automatically enters and exits bootloader mode so t..
€6.50
Ex Tax:€5.37
Model: PL2303RS232
A USB to RS232 adapter with PL2303 chip and 100cm USB cable. If Windows does not install the driver automatically, you can download the Windows driver here and install it manually: PL2303 Windows Driver Download...
€9.00
Ex Tax:€7.44
Model: PL2303RS232-50CM
A USB to RS232 adapter with PL2303 chip and 50cm USB cable. If Windows does not install the driver automatically, you can download the Windows driver here and install it manually: PL2303 Windows Driver Download...
€7.00
Ex Tax:€5.79
Model: PL2303GC-CABLE
A cable with a built-in USB to serial converter...
€6.00
Ex Tax:€4.96
RAKwireless RAK13006 WisBlock CAN Module
New
Model: RAK-100099
A CAN bus interface module from RAKwireless for the modular WisBlock system...
€10.50
Ex Tax:€8.68
RAKwireless RAK5802 WisBlock RS485 Interface Module
New
Model: RAK-100003
An RS485 module from RAKwireless for the modular WisBlock system...
€7.25
Ex Tax:€5.99
Model: RPI-DEBUGPROBE
..
€14.50
Ex Tax:€11.98
Model: DB9TOOBD2CABLE
This cable is suitable for the CAN bus shield and converts the pins of the RS232(DB9) connector to a standard OBD2 connector that is suitable for most cars. See the images for the pinout...
€6.50
Ex Tax:€5.37
Model: SEEED-103030215
With this CAN bus shield from Seeed Studio you can connect your Arduino Uno (or a compatible variant) to a CAN bus, for example that of a car. Specifications: CAN Bus: Tranceiver chip: MCP2551 Controller chip: MCP2515 Maximum tra..
€31.25
Ex Tax:€25.83
Model: SIT65HVD08P
SIT65HVD08 is a half-duplex driver and receiver for RS485 and RS422 communicatio up to 10Mbps. Multiple transceivers can form a RS485 bus, and the SIT65HVD08P features built-in overvoltage, overcurrent and thermal protection...
€1.50
Ex Tax:€1.24
Model: ZXACC-EXTRG-V10
An RS485 adapter module that can be placed as a shield on the Smart Panlee 7 inch Serial Screen. Note: No cables are included, they can be ordered separately here: Molex Picoblade (compatible) cable 4p (for RS485) Molex Picoblade (compatib..
€3.50
Ex Tax:€2.89
Model: ZXACC-ESPDB
The ZXACC-ESPDB is a USB to serial converter specifically designed for programming Panlee products...
€6.00
Ex Tax:€4.96
Model: SP3232MOUNT
A module to connect an RS232 cable to your embedded system that has a UART connection. The module only needs to be equipped with 3.0 to 5.5V and the TX, RX, CTS and RTS signals from the UART can be set up for communication. 6 Dupont Female-Fema..
€5.00
Ex Tax:€4.13
Model: STLINKV2-COMP
The ST-LINK V2 Compatible is an in-circuit debugger and programmer for the STM8 and STM32 microcontrollers. Package content: 1x ST-LINK V2 Compatible 1x 4p female -> 4p female dupont cable Tools for the ST-LINK V2: Driver + Fi..
€5.50
Ex Tax:€4.55
USB Host Shield - for Arduino
Discontinued
Model: USBHOSTSHIELD
This shield can easily be placed on an Arduino Uno, Arduino Mega or Arduino Due. The shield makes a USB host of the microcontroller such that, for example, a mouse or keyboard can be connected to the Arduino. The following types of devices are sup..
€12.00
Ex Tax:€9.92
Model: RS485USBCH340
A USB to RS485 adapter using the CH340 chip.  The A and B signals of the RS485 interface are stated below the green screw terminal connector...
€3.00
Ex Tax:€2.48
Model: USBPDTRIG
This USB PD trigger module allows you to request specific voltages (5V, 9V, 12V, 15V and 20V) from a USB-PD power supply. In addition to USB PD, other protocols are also supported. Use the button to switch between voltages. If the LED next to a volta..
€4.00
Ex Tax:€3.31
Model: USBASP
A programmer to provide your AVR with new software. For example, if you want to burn a new Arduino bootloader into an AVR chip. A 10 pin flatcable with connectors is included. This works well in combination with the adapter to 6-pins for your Ardu..
€4.50
Ex Tax:€3.72
Model: WS-19717 Brand: DFRobot
A bi-directional UART to RS485 converter module that can be placed as a HAT on a Raspberry Pi Pico (or other microcontroller with the same form factor). Note: No Raspberry Pi Pico is included...
€6.50
Ex Tax:€5.37
Model: WS-21442 Brand: Waveshare
A USB to serial converter that can be configured for 3.3V and 5V using a jumper. If the jumper is completely removed, it is also possible to connect an external power supply to the VCCIO pin, making the module compatible with other voltages from 1.8V..
€4.00
Ex Tax:€3.31
Model: WS-21443
A USB to serial converter that can be configured for 3.3V and 5V using a jumper. If the jumper is completely removed, it is also possible to connect an external power supply to the VCCIO pin, making the module compatible with other voltages from 1.8V..
€4.00
Ex Tax:€3.31
Waveshare CP2102 TTL USB to Serial Converter - USB-A - 3.3V
2-4 Weeks
Model: WS-7605 Brand: Waveshare
A USB to serial converter. The VCCIO pin on this module is depending on the jumper connected to the USB voltage or to the internal 3.3V output of the CP2101...
€5.50
Ex Tax:€4.55
Model: WS-6170
A USB to serial converter that can be configured for 3.3V and 5V using a jumper...
€8.00
Ex Tax:€6.61
Waveshare FT232RL TTL USB to Serial Converter - USB-C - 3.3-5V
2-4 Weeks
Model: WS-20646
A USB to serial converter that can be configured for 3.3V and 5V using a jumper. ..
€8.00
Ex Tax:€6.61
Model: WS-22456
A USB to RS485 adapter. Note: This product may only be used for business research and development or industrial applications...
€9.00
Ex Tax:€7.44
Model: WS-17286
A USB to RS485 adapter. Note: This product may only be used for business research and development or industrial applications...
€12.00
Ex Tax:€9.92
Model: WS-26545 Brand: Waveshare
A module from Waveshare that converts a USB signal to RS485...
€20.50
Ex Tax:€16.94
Model: WS-23951 Brand: Waveshare
A Waveshare module that can be used as a bridge between Ethernet and RS232 communication. Note: This product may only be used for business research and development or industrial applications...
€22.50
Ex Tax:€18.60
Waveshare Industrial Serial Server - RS485 to PoE Ethernet Module
2-4 Weeks
Model: WS-23273 Brand: Waveshare
A Waveshare module that can be used as a bridge between Ethernet and RS485 communication. Note: This product may only be used for business research and development or industrial applications...
€22.50
Ex Tax:€18.60
Model: WS-21550
A USB to serial (UART) converter. Note: This product may only be used for business research and development or industrial applications...
€5.50
Ex Tax:€4.55
Model: WS-17939
A USB to serial (UART) converter. Note: This product may only be used for business research and development or industrial applications...
€8.50
Ex Tax:€7.02
Model: WS-15817
A module made by Waveshare that converts a USB signal to RS232, RS485, or TTL UART. Note: Only one of RS232, RS485 and TTL can be converted to USB at a time. Also, RS232, RS485 and TTL cannot be converted between each other. Note: This product ..
€24.00
Ex Tax:€19.83
Model: WS-17221 Brand: Waveshare
An isolated RS485 module from Waveshare specially made to use as a HAT in combination with a Raspberry Pi SBC. In addition, this module can also be used separately with another microcontroller via the male header pins. Note: No Raspberry Pi is inc..
€16.50
Ex Tax:€13.64
Model: WS-20265
A USB to serial converter that can be configured for 3.3V and 5V using a jumper. If the jumper is completely removed, it is also possible to connect an external power supply to the VCCIO pin, making the module compatible with other voltages from 1.8V..
€4.00
Ex Tax:€3.31
Model: WS-20645
A USB to serial converter that can be configured for 3.3V and 5V using a jumper. If the jumper is completely removed, it is also possible to connect an external power supply to the VCCIO pin, making the module compatible with other voltages from 1.8V..
€4.00
Ex Tax:€3.31
Model: WS-3965
A module from Waveshare to connect an RS232 cable to your embedded system that has a UART connection...
€5.00
Ex Tax:€4.13
Model: WS-14882 Brand: M5Stack
An RS485 and CAN bus module in one from Waveshare, specially made to use as a HAT in combination with a Raspberry Pi SBC. In addition, this module can also be used separately with another microcontroller via the through hole pins...
€12.00
Ex Tax:€9.92
Model: WS-3945 Brand: M5Stack
With this module you can provide certain microcontrollers with a CAN bus interface. For example, ESP32 based boards have a built-in CAN bus (TWAI) controller...
€4.75
Ex Tax:€3.93
Showing 51 to 93 of 93 (2 Pages)
1
false
true
true
Remove
Change
tr