Model: SGP30MOD
A sensor module that can measure TVOC and eCO2. The module communicates via I2C.
Specifications:
Supply voltage: 1.8-5V DC
Current: ~40mA
Signal voltage: 1.8-5V
Measuring range:
TVOC: 0-60000ppb
eCO2: 400-60000ppm
Samp..
€9.75
Ex Tax:€8.06
Model: GP2Y1010AU0F
This optical sensor from Sharp can measure the air quality by measuring air particles/dust.
More information about the sensor can be found in the datasheet under the tab "Downloads".
With this dust sensor, the required cable, LED series resistor ..
€8.00
Ex Tax:€6.61
Model: PPD42NJ
This optical dust sensor can measure the air quality by measuring on air particles/dust.
This sensor is supplied with the corresponding cable.
Pinout of the connector:
Pin
Description
1
GND
2
Out..
€9.75
Ex Tax:€8.06
Model: SI7021MOD2
A compact temperature and humidity sensor combined. Several applications are possible, such as for a weather station or climate control. In addition, the sensor has a built-in heater element to test the sensor or to evaporate condensation.
Specifi..
€9.75
Ex Tax:€8.06
Model: SONOFF-SNZB-02DR2
The Sonoff SNZB-02DR2 is a very handy temperature and humidity sensor that works with the wireless Zigbee protocol. With this sensor module, you can easily transmit the temperature and humidity to other devices to turn on an air conditioner/fan, for ..
€21.50
Ex Tax:€17.77
Model: SONOFF-SNZB-02D
The Sonoff SNZB-02D is a very handy temperature and humidity sensor that works with the wireless Zigbee protocol. With this sensor module, you can easily transmit the temperature and humidity to other devices to turn on an air conditioner/fan, for ex..
€13.25
Ex Tax:€10.95
Model: SONOFF-SNZB-02WD
The Sonoff SNZB-02WD is a very handy temperature and humidity sensor and works with the Zigbee wireless protocol. With this sensor module, the temperature and humidity can easily be transmitted to other devices to, for example, turn on an air conditi..
€17.75
Ex Tax:€14.67
Model: SONOFF-THS01
This temperature and humidity sensor from Sonoff is made to be used together with the Sonoff TH Elite or TH Origin...
€8.50
Ex Tax:€7.02
Model: SPA06
A very compact barometer that works via I2C or SPI.
Note: It says BME/BMP280 on the PCB, but the supplied module has a SPA06-003...
€3.75
Ex Tax:€3.10
Model: WS-20232
Brand: DFRobot
This environment sensor module from Waveshare is made for the Raspberry Pi Pico or other microcontrollers that use the same pin layout. This allows you to measure movement, temperature, humidity, light and air quality.
Note: No Raspberry Pi Pico i..
€35.00
Ex Tax:€28.93
Model: WS-16864
Brand: Waveshare
With this HAT you provide your Raspberry Pi with various sensors that communicate via I2C. The HAT is designed for the Raspberry Pi Zero, but also works with other models. In addition, the module can also be used with other microcontrollers such as a..
€36.50
Ex Tax:€30.17
Model: WMD1MHP303B
A barometric module/shield for the Wemos D1 Mini.
Works with I2C interface. Module can measure temperature and pressure.
Specifications:
Measuring range pressure: 300-1200 hPa
Measurement range temperature: -40-85 °C
Precision pres..
€3.50
Ex Tax:€2.89
Model: WMD1MSGP30SHIELD
A TVOC and eCO2 sensor module/shield for the Wemos D1 Mini. The module communicates via I2C.
Specifications:
TVOC range: 0-60000ppb
eCO2 range: 400-60000ppm
Communication: I2C
I2C address: 0x3C
One 2mm mounting hole
For mor..
€11.00
Ex Tax:€9.09
Model: WMD1MSHT30SHIELD
A shield with an SHT30 temperature and humidity sensor for the (Wemos) D1 Mini.
The shield works with I2C where the I2C address is adjustable (see PCB)
Pin headers are included with this shield (as shown)
For more information, see this page: S..
€5.00
Ex Tax:€4.13
Model: MH-Z14A
This CO2 sensor can very accurately measure the amount of carbon dioxide with the non-dispersive infrared principle (NDIR).
This sensor is supplied with a compatible cable and can also be soldered with pin headers (not included). We also sell a cabl..
€27.75
Ex Tax:€22.93
Model: MH-Z19C
The MH-Z19C is the successor to the popular MH-Z19B and is largely compatible. This version is more stable, and in practice more accurate than the MH-Z19B. This CO2 sensor can measure the amount of carbon dioxide very accurately with the non-dispersi..
€17.50
Ex Tax:€14.46
Model: MH-Z19C-P3.5
The MH-Z19C can measure the amount of carbon dioxide in the air very accurately with the non-dispersive infrared principle (NDIR). The module works with PWM or UART protocol.
Note: The pins are not long enough to connect DuPont cables to female pi..
€21.00
Ex Tax:€17.36