Menu
Your Cart

Soldering

Model: 3DXMASTREESOLKIT
This kit contains everything you need to builld your own christmas tree with lights. An extended manual is included in this kit. Note: 9V Battery is not included...
€8.50
Ex Tax:€7.02
Model: ZD-10
With this budget soldering iron standard you can give your loose soldering iron a handy standard. With this stand a sponge is supplied for cleaning the soldering tip. Suitable for: Budget Solderi..
€5.00
Ex Tax:€4.13
Model: ZD-30C
With this budget soldering iron you can solder well for a low price.  With this soldering iron a standard 1mm point is supplied with which you can do almost all the standard soldering work. ..
€8.00
Ex Tax:€6.61
Model: ZD-99KIT
This kit with a budget soldering station and lots of accessories is a good base to start soldering. Specifications ZD-99 soldering iron: Input voltage: 230VAC Soldering iron power: 48W Te..
€20.00
Ex Tax:€16.53
Budget Soldering Station VTSS5 - 50W
On request
Model: VTSS5
With this budget soldering station you can easily solder for a low price.  A standard 1mm tip is supplied with this soldering station with which you can perform both large and small soldering ..
€15.00
Ex Tax:€12.40
Model: ZD-99
With this budget soldering station you can solder perfectly for a low price.  At this soldering station a standard 1mm point is supplied with which you can do almost all the standard soldering..
€15.00
Ex Tax:€12.40
Model: SOLD3xAA
With this budget wireless soldering iron you can easily solder mobile. With this soldering iron a very fine pointed point is delivered with which you can do almost all the standard soldering work. ..
€9.00
Ex Tax:€7.44
Model: XMASTREESOLKITBATHOL
This kit contains everything you need to builld your own christmas tree with lights. An extended manual is included in this kit. Note: 9V Battery is not included...
€8.50
Ex Tax:€7.02
Model: DESOLPUMP
Desoldering pump with teflon nozzle, made of ABS and aluminum. Length: 190mm..
€3.00
Ex Tax:€2.48
Model: DESOLDERWIRE1MM
1mm wide solder ribbon for removing solder. The desoldering ribbon "absorbs" the soldering tin. Comes on a handy bobbin...
€1.50
Ex Tax:€1.24
Model: DESOLDERWIRE2MM
2mm wide solder ribbon for removing solder. The desoldering ribbon "absorbs" the soldering tin. Comes on a handy bobbin...
€1.50
Ex Tax:€1.24
Model: DESOLDERWIRE3MM
3mm wide solder ribbon for removing solder. The desoldering ribbon absorbs the soldering tin. Comes on a handy bobbin...
€1.50
Ex Tax:€1.24
Model: THIRDHAND+MAG
With a so-called third hand you can attach your PCB to this holder so that you can leave your hands for soldering. Together with the magnifying glass, your soldering work will be a lot easier!  ..
€4.00
Ex Tax:€3.31
Model: DIYDSO13805K
Portable oscilloscope with 3.5-6V connection (eg a 5V adapter, USB adapter, USB power bank or 3x/4x AA batteries). Put your own oscilloscope together with this DIY kit: 2.4 inch 240x320 pix..
€27.00
Ex Tax:€22.31
Model: LM317CERPOTDIYKIT
With this do-it-yourself kit you make an adjustable voltage regulator based on the LM317. Specifications: Input voltage: 5.0-25VDC, 6.0-20VAC Maximum output voltage: Input voltage-2.5V Ma..
€4.00
Ex Tax:€3.31
Model: LM317STDPOTDIYKIT
With this do-it-yourself kit you make an adjustable voltage regulator based on the LM317. Specifications: Input voltage: 5.0-25VDC, 6.0-20VAC Output voltage: 1.25VDC-12VDC Maximum output ..
€4.00
Ex Tax:€3.31
Model: LM3915LVLINDDIYKIT
With this do-it-yourself kit you create an audio level indicator yourself! Specifications: Voltage: 9-12VDC Suitable for headphone/aux voltage level* PCB format: 62x26mm * Don't ..
€4.00
Ex Tax:€3.31
Model: M5STACK-K039
The M5STACK ATOMIC Proto Kit is a DIY proto kit designed for the M5ATOM series. The module can be connected directly via the 9 pins on an M5ATOM. The kit consists of a PCB with connection material and..
€11.00
Ex Tax:€9.09
Model: M5STACK-K025
This is an extensive prototype module for the M5Core with a blank circuit board, power input and mounting options for wall mounting or DIN rails. This circuit board is specifically intended for the..
€15.00
Ex Tax:€12.40
Model: M5STACK-K026
This is an extensive prototype module for the M5Core with a blank circuit board, power input and mounting options for wall mounting or DIN rails. This circuit board is specifically intended for the..
€13.00
Ex Tax:€10.74
Model: M5STACK-K011-B
This is an prototype module for the M5Core with a blank circuit board, power input and mounting options for wall mounting or DIN rails. This circuit board is specifically intended for the M5Stack C..
€13.00
Ex Tax:€10.74
Model: M5STACK-M032
This is a prototype module with a height of 13.2mm for the M5Stack ESP32 Core and Core 2 with a blank printed circuit board, header pins and other connectors that connect the M5Stack Core. These heade..
€5.00
Ex Tax:€4.13
Model: NE555BLINKDIYKIT
With this do-it-yourself kit you can apply the NE555 chip in a LED blink module! You can change the blinking frequency with the potentiometer. Specifications: Voltage: 12VDC PCB format: 40x..
€4.00
Ex Tax:€3.31
Model: PSRPISUPSWITCH
With this kit you make a power switch that automatically shuts off the power when you have turned off the Raspberry Pi. Turning on the Raspberry is then a push of a button on the module. In addition, ..
€15.00
Ex Tax:€12.40
Model: PSBRIGHTPI
With this kit you make a light module for the camera for the Raspberry Pi. The LEDs and headers must be soldered. The LED driver and I2C interface are pre-soldered. The module uses an I2C interface..
€15.00
Ex Tax:€12.40
Model: BQ100G0.5MM
A roll with 100g solder wire. Specifications: Materials: 60% Sn 40% Pb Wire diameter: 0.5mm Weight: 100g Melting point: 183-191°C With resin core Best suitable fo..
€6.00
Ex Tax:€4.96
Model: BQ100G0.5MM-LF
A roll with 100g solder wire (lead-free). Specifications: Lead-free Materials: 99.3% Sn 0.7% Cu Wire diameter: 0.5mm Weight: 100g Melting point: 227°C With resin ..
€8.00
Ex Tax:€6.61
Model: BQ100G0.7MM
A roll with 100g solder wire. Specifications: Materials: 60% Sn 40% Pb Wire diameter: 0.7mm Weight: 100g Melting point: 183-191°C With resin core Best suitable fo..
€6.00
Ex Tax:€4.96
Model: BQ100G0.7MM-LF
A roll with 100g solder wire (lead-free). Specifications: Lead-free Materials: 99.3% Sn 0.7% Cu Wire diameter: 0.7mm Weight: 100g Melting point: 227°C With resin ..
€8.00
Ex Tax:€6.61
Model: BQ100G1.0MM
A roll with 100g solder wire. Specifications: Materials: 60% Sn 40% Pb Wire diameter: 1.0mm Weight: 100g Melting point: 183-191°C With resin core Best suitable for: T..
€6.00
Ex Tax:€4.96
Model: BQ100G1.0MM-LF
A roll with 100g solder wire (lead-free). Specifications: Lead-free Materials: 99.3% Sn 0.7% Cu Wire diameter: 1.0mm Weight: 100g Melting point: 227°C With resin ..
€8.00
Ex Tax:€6.61
Model: PROTOSHIELDKITUNOLEO
A protoshield for an Arduino Uno or Leonardo. This is a DIY kit with two LEDs and two tactile switches. Package contents: 1x Protoshield PCB 2x 330 ohm resistor 1x 1k ohm resistor 2x Ta..
€3.50
Ex Tax:€2.89
Model: RTKRPITRAFFICHAT
Traffic light HAT kit for Raspberry Pi. The HAT has 3 extra large LEDs, a buzzer and a tactile switch that must be soldered yourself. The series resistors and a 40 pin female header are pre-soldered. ..
€9.50
Ex Tax:€7.85
Model: TIPCLEANERMETAL
This Iron tip cleaner contains metal wool that allows you to remove solder residues from your soldering tip in a simpler way than the standard. A Iron tip cleaner has the following advantages over a (..
€4.00
Ex Tax:€3.31
Model: SOLDTIP-C1-1
Soldering tip with 1.5mm tip for ZD-30 (C) and ZD-99 soldering irons. Note: You may have a different type of soldering station with the same type number. Therefore, always check the dimensions (see..
€1.50
Ex Tax:€1.24
Model: SOLDTIP-C1-2
Soldering tip with 0.5mm tip for ZD-30 (C) and ZD-99 soldering irons. Note: You may have a different type of soldering station with the same type number. Therefore, always check the dimensions (see..
€1.50
Ex Tax:€1.24
Model: SOLDTIP-C1-3
Soldering tip with 3mm slanted/flattened tip for ZD-30 (C) and ZD-99 soldering irons. Note: You may have a different type of soldering station with the same type number. Therefore, always check the..
€1.50
Ex Tax:€1.24
Model: SOLDERWIRE17G1MM
A tube with 17g soldering tin (leaded). The thickness is 1mm. Flux is incorporated into the soldering tin so that it flows easily. The indication of the soldering tin is 60% Tin and 40% lead. Mel..
€2.50
Ex Tax:€2.07
Model: JF-0530B-6V
This solenoid functions as an electromagnet and can retract a pin. The spring pushes the pin out by default, but the pin is pulled in when the solenoid is activated. Specifications: Voltage: ..
€4.00
Ex Tax:€3.31
Model: TDA2030DIYKIT
With this do-it-yourself kit based on the TDA2030 chip you can make your own amplifier! Specifications: Voltage: 9-15VDC TDA2030 chip  Speaker impedance: 4 to 8 ohms Output power: ..
€6.00
Ex Tax:€4.96
Model: TEENSYETHERNETKIT-4.1
With this DIY kit you provide the Teensy 4.1 with an ethernet connection. This product comes with loose parts and still needs to be soldered. For more information, see this page: PT8211 Etherne..
€6.00
Ex Tax:€4.96
Model: TEENSYPT8211KIT
The Teensy PT8211 Audio Kit is a DIY digital to analog (DAC) converter shield for the Teensy 3.x. The PT8211 chip is a 16 bit DAC and provides a line-level output signal. This means that the sign..
€5.00
Ex Tax:€4.13
Model: NCGFLUX1.4ML
This gel flux is a No-clean gel that can be applied from a syringe. The gel is intended for SMD assembly and repair. As long as it is not washed off, the flux will remain during the soldering process...
€3.00
Ex Tax:€2.48
Showing 1 to 43 of 43 (1 Pages)
1
false
false
true
Remove
Change
tr