Model: MK8EXTRUDER
Aluminum MK8 Bowden Extruder for 3D printers. This is an upgrade to the original plastic extruder included with most 3D printers.
Compatible with most Creality and Ender printers. For other printers check compatibility.
Is suitable for filament..
€8.00
Ex Tax:€6.61
Model: HOTENDVOLCANOV612V-1.75MM
Complete hotend with fans for a 3D printer. The hotend is well suited for high speed printing due to the longer melting zone. Keep in mind that this also creates more stringing than with a standard V6 hotend.
Specifications:
Suitable filamen..
€31.00
Ex Tax:€25.62
Model: HOTENDVOLCANOV624V-1.75MM
Complete hotend with fans for a 3D printer. The hotend is well suited for high speed printing due to the longer melting zone. Keep in mind that this also creates more stringing than with a standard V6 hotend.
Specifications:
Suitable filamen..
€31.00
Ex Tax:€25.62
Model: DDGEXTRUDER-E3D-BTCOMP
Dual Drive Gear Extruder for 3D printers. This is an upgrade to the original plastic extruder included with most 3D printers. This extruder has a double drive for trouble-free material feeding, so that the filament will no longer slip. In addition, i..
€16.00
Ex Tax:€13.22
Model: HC12V40W1M
Heating element for 3D printers. This concerns a 12V/40W heater cartridge.
Specifications:
Voltage: 12V
Wattage: 40W
Cable length: 1 meter
Cartridge length: 20mm
Cartridge diameter: 6mm..
€2.50
Ex Tax:€2.07
Model: HC24V40W1M
Heating element for 3D printers. Concerns a 24V/40W heater cartridge.
Specifications:
Voltage: 24V
Wattage: 40W
Cable length: 1 meter
Cartridge length: 20mm
Cartridge diameter: 6mm..
€2.50
Ex Tax:€2.07
Model: EXTRBOWV6-1.75MM
Complete hotend with bowden tube for a 3D-printer. This hotend is suitable for 1.75mm filament.
Specifications:
Heater cartridge:
Supply voltage: 12V DC
Maximal current: 2.5A
Thermistor: NTC 3950 100kΩ
Nozzle:
Materi..
€10.00
Ex Tax:€8.26
2-4 Weeks
Model: EXTRDIRV6-1.75MM
Complete direct drive hotend for a 3D-printer. This hotend is suitable for 1.75mm filament.
Specifications:
Heater cartridge:
Supply voltage: 12V DC
Maximal current: 2.5A
Thermistor: NTC 3950 100kΩ
Nozzle:
Material: ..
€10.00
Ex Tax:€8.26
Model: NTC100KCABLE
A default NTC of 100K(1% accuracy) sealed in glas and connected with a 100cm cable. This NTC is suited to operate for 3D printers.
The end of the cables are loose cables to connect the NTC to the desired controller.
Specifications:
Resistor..
€1.50
Ex Tax:€1.24
Model: NTC100KCARTRIDGE
This is a temperature thermistor cartridge for 3D printer hotends. This sensor is compatible with some E3D/clone E3D hotend blocks.
Check whether your hotend block is compatible with this cartridge. You cannot use this cartridge with a hot end block..
€3.00
Ex Tax:€2.48
Model: LDO-ORBITER-V1.5
This lightweight extruder is ideal for a direct drive setup. Due to the planetery gearbox, it is a powerful extruder despite the small Nema 14 pancake stepper motor.
Specifications:
Stepper motor:
Maximum RMS current per phase: 0.85A
..
€46.00
Ex Tax:€38.02
Model: PC4-01
A standard PC4 coupling, for a 4mm PTFE tube. This coupling has no through-feed, so the PTFE tube cannot pass through it.
Specifications:
Model: PC4-01
Thread: 1/8NPT x 6.5mm
Suitable PTFE tube outer diameter: 4mm
Package contents:
..
€1.00
Ex Tax:€0.83
Unknown
Model: PC4-01T
A standard PC4 coupling, for a 4mm PTFE tube. This coupling has a feedthrough, so the PTFE tube can go through it.
Specifications:
Model: PC4-01
Thread: 1/8NPT x 6.5mm
Suitable PTFE tube outer diameter: 4mm
Package contents:
1..
€1.00
Ex Tax:€0.83
Model: PC4-M6
A standard PC4 coupling, for a 4mm PTFE tube. This coupling has no throughput, so the PTFE tube cannot pass through it.
Specifications:
Model: PC4-M6
Thread: M6 x 5mm
Suitable PTFE tube outer diameter: 4mm
Suitable filament diameter: 1..
€1.00
Ex Tax:€0.83
Model: SILCOVERMK8
Silicone sock for an MK8 hotend.
The sock ensures better heat insulation of the heating element and ensures that excessive filament does not stick to the heater block as quickly...
€1.75
Ex Tax:€1.45
Showing 1 to 15 of 15 (1 Pages)