Model: BTT-ADXL345-V1.0
The ADXL345 is a small, low power, 3-axis accelerometer with high resolution. This module is made to mount on the back of a round NEMA14 stepper motor, these motors are often used as extruder motors...
€8.50
Ex Tax:€7.02
Model: BTT-ESP07S
This ESP module can be directly connected to most BigTreeTech boards, such as the SKR 2 and the OCTOPUS V1.1 boards. You can use the Wi-Fi module with ESP3D if you are using Marlin, or via Duet Web Control (DWC) if you are using RepRap Firmware.
S..
€8.00
Ex Tax:€6.61
Model: BTT-MINI-UPS-V2.0
This UPS module prevents failed prints due to power failure. When the power fails, the UPS module detects it and causes the Z-axis to go up (so that the nozzle does not damage the print) and save the current location. This means you can continue prin..
€11.00
Ex Tax:€9.09
Model: BTT-MINI12864
..
€14.50
Ex Tax:€11.98
Model: BTT-SFSV1.0
This smart filament sensor can be directly connected to most BigTreeTech boards, such as the SKR 2.0 and the OCTOPUS V1.1 boards. You can use the smart filament sensor to detect your filament jams and of course the end of a filament roll. This sensor..
€19.00
Ex Tax:€15.70
Model: BTT-TFT28-V3.0
See the following video for an installation instruction on an Ender 3 Pro: How to install BTT TFT28 V3 on Creality Ender 3 Pro..
€40.00
Ex Tax:€33.06
Model: BTT-TFT35-E3-V3.0
..
€42.00
Ex Tax:€34.71
Model: BTT-TMC2130-V3.0-SPI
A stepper motor driver from BIGTREETECH with SPI interface. This stepper motor driver module can be used separately or in combination with a CNC shield or 3D printer...
€8.75
Ex Tax:€7.23
Model: BTT-UPS-V1.0
This UPS module prevents failed prints due to power failure. When the power fails, the UPS module detects it and causes the Z-axis to go up (so that the nozzle does not damage the print) and save the current location. This means you can continue prin..
€12.00
Ex Tax:€9.92
Model: LJ12A3-2-Z/AX
An inductive proximity/distance sensor that can detect metallic objects at close range. When no metal object is detected, the signal wire and ground are connected with a transistor. In case a metal object is detected, the signal wire takes the voltag..
€4.50
Ex Tax:€3.72
Model: LJ12A3-2-Z/AY
An inductive proximity/distance sensor that can detect metal objects at a close distance. If no metal object is detected, the signal wire and voltage of the power supply are connected together with a transistor. If an object is detected, the signal w..
€4.50
Ex Tax:€3.72
Model: LJ12A3-2-Z/BX
An inductive proximity/distance sensor that can detect metallic objects at close range. As soon as a metal object is detected, the signal wire and ground are connected with a transistor. If no object is detected, the signal wire takes the voltage of ..
€4.50
Ex Tax:€3.72
Model: LJ12A3-2-Z/BY
An inductive proximity/distance sensor that can detect metal objects at a close distance. As soon as a metal object is detected, the signal wire and the voltage of the power supply are connected with a transistor. If no object is detected, the signal..
€4.50
Ex Tax:€3.72
Model: LJ12A3-4-Z/BX-5V
An inductive proximity/distance sensor that can detect metallic objects at close range. As soon as a metal object is detected, the signal wire and ground are connected with a transistor. If no object is detected, the signal wire takes the voltage of ..
€4.50
Ex Tax:€3.72
Model: LJ12A3-4-Z/BX
An inductive proximity sensor that can be used for 3D printers and CNC machines, among others.
It detects metal objects within a distance of 4mm from the sensor.
Specifications:
Voltage: DC 6-36V
Current: max 300mA
Detecti..
€4.50
Ex Tax:€3.72
Model: LJ8A3-2-Z/BX
An inductive proximity/distance sensor that can detect metallic objects at close range. As soon as a metal object is detected, the signal wire and ground are connected with a transistor. If no object is detected, the signal wire takes the voltage of ..
€4.50
Ex Tax:€3.72
Model: SUNLU-S1-PLUS
The FilaDryer S1 Plus from SUNLU dries filament using a heating element. By drying your filament well, you get better print results, especially for materials such as TPU, Nylon and PETG. This updated Plus version of the S1 has a built-in fan, which c..
€48.00
Ex Tax:€39.67
Model: SUNLU-S2
SUNLU's FilaDryer S2 dries filament using a heating element. Drying your filament properly gives you better printing results, especially for materials like TPU, Nylon and PETG. This new version can dry filament at higher temperatures than the S1(+), ..
€55.00
Ex Tax:€45.45
Showing 1 to 18 of 18 (1 Pages)