Model: 52PI-F-0029
A 18 pieces cooling block set. This set is compatible with the Raspberry Pi 5 and the Raspberry Pi 4 Model B...
€10.50
Ex Tax:€8.68
Model: 52PI-EP-0107
With this ICE Tower Cooler from 52Pi you can provide a Raspberry Pi with active cooling. The heatsink is equipped with a fan that constantly blows air over the heatsink. This ensures that the Raspberry Pi remains lower in temperature than with a..
€22.75
Ex Tax:€18.80
Model: 52PI-ZP-0180
With this ICE Tower Cooler from 52Pi you can provide a Raspberry Pi 5 with active cooling. The heatsink is equipped with a fan that constantly blows air over the heatsink. This ensures that the Raspberry Pi remains lower in temperature than with a st..
€19.00
Ex Tax:€15.70
Model: 52PI-EP-0167
With this ICE Tower Cooler from 52Pi you can provide an Orange Pi 5(B) with active cooling. The heatsink is equipped with a fan that constantly blows air over the heatsink. This ensures that the temperature of the Raspberry Pi remains lower than with..
€20.00
Ex Tax:€16.53
Model: 52PI-EP-0112
With this ICE Tower Cooler from 52Pi you can provide a Raspberry Pi with active cooling. The heatsink is equipped with a fan that constantly blows air over the heatsink. This ensures that the Raspberry Pi remains lower in temperature than with a..
€22.75
Ex Tax:€18.80
2-4 Weeks
Model: HOSE3.5
A flexible transparent hose suitable for water and air pumps.
Note: Only suitable for our pumps with a relatively low pressure.
Note: If several meters are ordered, it is possible that this product is delivered in several pieces. These pieces a..
€2.00
Ex Tax:€1.65
Model: JT-DC3W-TUBE
Transparent hose suitable for submersible pumps with a connection of approx. 6mm.
Note: Only suitable for our pumps with a relatively low pressure.
Note: If several meters are ordered, it is possible that this product is delivered in several pi..
€1.50
Ex Tax:€1.24
Model: JT-DC3W-TUBE-20CM
Transparent hose suitable for submersible pumps with a connection of approx. 6mm. This can also be used with the SDS011 dust sensor.
Note: Only suitable for our pumps with a relatively low pressure.
Note: This product is supplied in separate pi..
€0.50
Ex Tax:€0.41
Model: COOL11x11-ALUMINUM
Suitable for providing small chips with some cooling.
Let op: Deze koelblokjes hebben geen plaklaag, je kunt bijvoorbeeld thermische lijm of deze tape gebruiken om ze te monteren: Thermisch Geleidende Tape..
€0.35
Ex Tax:€0.29
Model: COOL11x11-ADH
Suitable for providing small chips with some cooling...
€0.40
Ex Tax:€0.33
Model: COOL13x12-ALUMINUM
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.35
Ex Tax:€0.29
Model: COOL13x12-ADH
Suitable for providing small chips with some cooling...
€0.40
Ex Tax:€0.33
Model: COOL14x12-GREEN
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.40
Ex Tax:€0.33
Model: COOL14x12-GREEN-ADH
Suitable for providing small chips with some cooling...
€0.45
Ex Tax:€0.37
Model: COOL15x14-BLACK
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.40
Ex Tax:€0.33
Model: COOL15x14-BLACK-ADH
Suitable for providing small chips with some cooling...
€0.45
Ex Tax:€0.37
Model: COOL15x9-ALUMINUM
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.35
Ex Tax:€0.29
Model: COOL15x9-ADH
Suitable for providing small chips with some cooling...
€0.40
Ex Tax:€0.33
Model: COOL16x10-BLUE
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.40
Ex Tax:€0.33
Model: COOL16x10-BLUE-ADH
Suitable for providing small chips with some cooling...
€0.45
Ex Tax:€0.37
Model: COOL16x15-RED
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.45
Ex Tax:€0.37
Model: COOL16x16-RED-ADH
Suitable for providing small chips with some cooling...
€0.50
Ex Tax:€0.41
Model: COOL22x22-GREY
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.50
Ex Tax:€0.41
Model: COOL22x22-GREY-ADH
Suitable for providing small chips with some cooling...
€0.55
Ex Tax:€0.45
-600x600.jpg "Aluminum Heatsink - 40x40x11mm - Anodised Black")
Model: COOL40x40-BLACK
A heatsink to cool e.g. NEMA17 stepper motors. In addition, these heatsinks are also well suited for use with peltier elements.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Condu..
€0.95
Ex Tax:€0.79
Model: COOL40x40-BLACK-ADH
A heatsink to cool e.g. NEMA17 stepper motors. In addition, these heatsinks are also well suited for use with peltier elements...
€1.00
Ex Tax:€0.83
Model: COOL7x7-ALUMINUM
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.30
Ex Tax:€0.25
Model: COOL7x7-ADH
Suitable for providing small chips with some cooling...
€0.35
Ex Tax:€0.29
Model: COOL9x9-ALUMINUM
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.30
Ex Tax:€0.25
Model: COOL9x9-ADH
Suitable for providing small chips with some cooling...
€0.35
Ex Tax:€0.29
Model: DAIWA-604ZZ
Closed ball bearing type 604ZZ from Daiwa Bearing...
€1.00
Ex Tax:€0.83
Model: DAIWA-608ZZ
Closed ball bearing type 608ZZ from Daiwa Bearing...
€1.00
Ex Tax:€0.83
Model: DAIWA-623ZZP0
Closed ball bearing type 623ZZ from Daiwa Bearing...
€1.00
Ex Tax:€0.83
Model: DAIWA-625ZZ
Closed ball bearing type 625ZZ from Daiwa Bearing...
€1.00
Ex Tax:€0.83
Model: DAIWA-626ZZ
Closed ball bearing type 626ZZ from Daiwa Bearing...
€1.00
Ex Tax:€0.83
Model: DAIWA-6804ZZ
Closed ball bearing type 6804ZZ from Daiwa Bearing...
€2.25
Ex Tax:€1.86
Model: DAIWA-686ZZ
Closed ball bearing type 686ZZ from Daiwa Bearing...
€1.00
Ex Tax:€0.83
Model: FIXEDCOUPLER5-5MM
This fixed motor coupler is suitable for a coupling between two 5mm shafts.
The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: FIXEDCOUPLER5-8MM
This fixed motor coupler is suitable for a coupling between a 5mm shaft and 8mm shaft...
€2.00
Ex Tax:€1.65
Model: FIXEDCOUPLER8-8MM
This fixed motor coupler is suitable for a coupling between two 8mm shafts.
The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: FLEXCOUPLER5-8MM
This flexible motor coupler is suitable for a coupling between a 5mm shaft and 8mm shaft.
The coupling is 25mm high and 19mm in diameter. There are four screws supplied to mount the coupler...
€2.50
Ex Tax:€2.07
Model: FLEXCOUPLER8-8MM
This flexible motor coupler is suitable for a coupling between two 8mm shafts.
The coupling is 25mm high and 19mm in diameter. There are four screws supplied to mount the coupler...
€2.50
Ex Tax:€2.07
Model: GT2PULLEY16T5MM
This pulley is suitable for GT2 timing belts and motors with an axle of 5mm.
Specifications:
Timing belt type: GT2
Timing belt width (max): 7mm
Number of teeth: 16
Diameter axle: 5mm
Comes with two screws to attach axle..
€2.50
Ex Tax:€2.07
Model: GT2PULLEY20T5MM
This pulley is suitable for GT2 timing belts and motors with an axle of 5mm.
Specifications:
Timing belt type: GT2
Timing belt width (max): 7mm
Number of teeth: 20
Diameter axle: 5mm
Comes with two screws to attach axle..
€2.50
Ex Tax:€2.07
Model: GT2PULLEY20T8MM
This pulley is suitable for GT2 timing belts and motors with an axle of 8mm.
Specifications:
Timing belt type: GT2
Timing belt width (max): 7mm
Number of teeth: 20
Diameter axle: 8mm
Comes with two screws to attach axle..
€2.50
Ex Tax:€2.07
Model: GT2-BELT-110MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 110mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT2
..
€2.50
Ex Tax:€2.07
Model: GT2-BELT-158MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 158mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT2
..
€2.50
Ex Tax:€2.07
Model: GT2TIMINGBELT6MM
This timing belt is suitable for GT2 pulleys with a minimum width of 6mm.
Specifications:
Timing belt type: GT2
Timing belt width: 6mm
Sold per meter with two loose ends
Note: If several meters are ordered, it is possible that this ..
€2.00
Ex Tax:€1.65
Model: GT2-BELT-200MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and has a length of 200mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT..
€2.75
Ex Tax:€2.27
Model: GT2-BELT-280MM-CLOSED
This closed timing belt is suitable for GT2 pulleys with a minimum width of 6mm and a length of 280mm. The brown layer over the teeth of this timing belt (anti-slip tooth surface) provides extra grip.
Specifications:
Timing belt type: GT2
..
€2.75
Ex Tax:€2.27