Model: OP5PLUS-HEATSINK
Brand: Orange Pi
A large aluminum heatsink for the Orange Pi 5 Plus. The heatsink can be installed without screws and comes with a thermal pad.
Note: No Orange Pi is included...
€6.50
Ex Tax:€5.37
Model: OP-PWMHEATSINKFAN
Brand: Orange Pi
This Orange Pi product consists of a heatsink with a built-in PWM fan and is compatible with the Orange Pi 5 plus.
Note: No Orange Pi is included...
€11.50
Ex Tax:€9.50
Model: AE007
An active cooler for the Radxa ROCK 5A...
€4.00
Ex Tax:€3.31
Model: AE013B
An active cooler for the Radxa ROCK 5B or ROCK 5B+...
€7.50
Ex Tax:€6.20
Model: RPI5-COOLER
This Active Cooler from Raspberry Pi consists of a heatsink and a PWM cooling fan. Thermal pads have been pre-applied to the heatsink for optimal heat transfer.
Note: No Raspberry Pi is included...
€6.00
Ex Tax:€4.96
Model: FIXEDCOUPLER5-5MM
This rigid motor coupler is suitable for a coupling between two 5mm shafts.
The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: FIXEDCOUPLER5-8MM
This rigid motor coupler is suitable for a coupling between a 5mm shaft and 8mm shaft...
€2.00
Ex Tax:€1.65
Model: FIXEDCOUPLER8-8MM
This rigid motor coupler is suitable for a coupling between two 8mm shafts.
The coupling is 25mm high and 14mm in diameter. There are four screws supplied to mount the coupler...
€2.00
Ex Tax:€1.65
Model: RIGIDCOUPLER5-5MM-CS
This rigid motor coupler is suitable for a coupling between two 5mm shafts...
€2.25
Ex Tax:€1.86
Model: FIXEDCOUPLER5-8MM-CS
This rigid motor coupler is suitable for a coupling between a 5mm shaft and 8mm shaft...
€2.25
Ex Tax:€1.86
Model: RIGIDCOUPLER8-8MM-CS
This rigid motor coupler is suitable for a coupling between a 8mm shaft and 8mm shaft...
€2.25
Ex Tax:€1.86
Model: SERVODISC25T
A standard metal servo disc suitable for usage with MG995/MG996 type servo's(25T).
You can mount four M3 bolts on the disc.(four small bolts included)
The exact dimensions can be found in the images...
€0.50
Ex Tax:€0.41
Model: SERVOFREEWH25T
A metal attachment for a dual-axis servo. This freewheel is stronger than the plastic version that is usually included...
€0.50
Ex Tax:€0.41
Model: SHOCKABSNEMA17-BOLTS
A shock absorber for NEMA17 stepper motors. The damper has M3 screw thread on one side and 3.4mm mounting holes on the other.
Specifications:
Suitable for form factor: NEMA17 (42 x 42mm)
Material: Metal and rubber
Dimensions: See images
..
€3.25
Ex Tax:€2.69
Model: WHEELCARKITDIY
An extra wheel for the car kit.
Dimensions: 65mm (diameter), 27mm (width).
The axle of the wheel is approximately 5mm in diameter with two flat sides so that the thickness of the axle at the smallest point is 4mm (see images for more clarity)
..
€2.00
Ex Tax:€1.65
Model: SPRING8X25
Stiff spring for 3D printers. The spring ensures that a heated bed does not have to be adjusted as often.
Dimensions: 8 x 25 mm..
€1.00
Ex Tax:€0.83
Model: TO220HEATSINK
A heatsink kit for components based on the TO-220 package. The heatsink comes with mounting material.
Specifications:
Dimensions cooling block: 20 x 14.5 x 9.5 mm
Package Contents:
1x Aluminum heat sink for TO-220
1x M3x5m..
€0.80
Ex Tax:€0.66
Model: TR8X2NUT
Threaded nut for 3D printers and CNC machines. This nut can be combined with a TR8x2mm trapezoidal spindles.
Specifications:
Lead: 2mm/rev
Dimensions: See images..
€2.00
Ex Tax:€1.65
Model: TR8X8NUT
Threaded nut for 3D printers and CNC machines. This nut can be combined with a TR8x8mm trapezoidal spindles.
Specifications:
Lead: 8mm/rev
Dimensions: See images..
€2.00
Ex Tax:€1.65
Model: WS-23118
With this ICE Tower Cooler you can provide a Raspberry Pi 4 Model B with active cooling. The heatsink is equipped with a fan that blows air over the heatsink, the speed can be set via PWM. This ensures that the temperature of the Raspberry Pi remains..
€21.50
Ex Tax:€17.77
Model: WS-22931
This fan with heatsink is perfect for the Raspberry Pi 4B and, with the included fan adapter, you keep all IO pins for e.g. a shield. The fan features a PWM controller, allowing you to adjust the fan speed to optimally cool your Raspberry Pi.
Note..
€11.00
Ex Tax:€9.09
Model: 608ZZ
Closed ball bearing of the type 608ZZ
Specifications:
Inner diameter: 8mm
Outer diameter: 22mm
Thickness: 7mm..
€1.00
Ex Tax:€0.83