Model: HC-05BACKPLANE
This backplane is intended to solder an HC-05, HC-06, HM-10 or comparable module.
This makes the RX, TX, STATE, EN pin easy to connect to the bluetooth module.
This board only ensures that the voltage on the module is brought to 3.3V (from..
€1.50
Ex Tax:€1.24
Model: BREAKOUT-ESP-01
This is a breakout board for an ESP-01(S) module with which it can easily be used on a breadboard, for example. The ESP-01 module must be mounted on the board in such a way that the 3.3V and RX pin are on the side of the capacitor...
€1.00
Ex Tax:€0.83
Model: DEVBOARDEPS32WROVER
This is a development board for the ESP32-WROVER WiFi module. The ESP32-WROVER can easily be connected to this. With the help of this board, the WiFi module can be controlled and programmed without having to solder.
This board uses a CP210..
€9.50
Ex Tax:€7.85
Model: DEVBOARD-ESP8266
This is a development board for ESP8266 Wi-Fi modules. Using this board, the Wi-Fi module can be controlled and programmed without soldering.
Specifications:
Compatible ESP boards: ESP-01, ESP-01S, ESP-07, ESP-07S, ESP-12E, ESP-12F, ESP-12S ..
€10.50
Ex Tax:€8.68
Model: ESP8266-12-BOARD
A handy breakout board for ESP-07 and ESP-12 with a built-in pull-down resistor on GPIO15 and a pull-up resistor on the EN-pin. The breakout board also has the option of soldering a voltage regulator on it, so that the ESP module can also b..
€1.50
Ex Tax:€1.24
Model: MSOP10SOT23-DIP10
An adapter for SMD chips to DIP. The white dot on the adapter indicates where pin 1 of the chip should be soldered.
Specifications:
Suitable chip formats: MSOP10/SOT23-3/5/6/8
Pin spacing (DIP): 2.54mm
Dimensions PCB: 12.7 x 10.16mm
..
€0.40
Ex Tax:€0.33
Model: MSOP12SOT23-DIP12
An adapter for SMD chips to DIP. The white dot on the adapter indicates where pin 1 of the chip should be soldered.
Specifications:
Suitable chip formats: MSOP12/SOT23-3/5/6/8
Pin spacing (DIP): 2.54mm
Dimensions PCB: 15.24 x 10.16mm
..
€0.40
Ex Tax:€0.33
Model: 1.27-2.0-2.54-ADAPTER
A pin adapter that can be used, for example, to easily convert a 2.54mm pin interface to a 2.0mm or 1.27mm pin interface...
€0.40
Ex Tax:€0.33
Model: QFNQFPTOHEADERS
A double-sided adapter board for chips with a QFN44, QFP44, QFN48 and QFN48 package to convert to standard headers.
The corner closest to pin 1 is the corner where pin 1 of the chip must be soldered...
€0.50
Ex Tax:€0.41
Model: SMT0603-0805-DIP8
An adapter that can be used to convert, for example, 0603/0805 SMT LEDs or resistors to header connectors...
€0.40
Ex Tax:€0.33
Model: SO-8-SOT563TODIP
A set of a total of 6 pieces double-sided adapter board for chips with a SO-8, TSSOP8, MSOP8, SOT23-6, SC70 or SOT563 package to convert to a DIP package.
The dot/ball next to the chip indicates where pin 1 of the chip should be soldered...
€4.00
Ex Tax:€3.31
Model: SOP16TODIP
A double-sided adapter board for chips with a SOP16, SSOP16 and TSSOP16 package to convert to a DIP package.
The arrow indicates where pin 1 of the chip must be soldered...
€0.45
Ex Tax:€0.37
Model: SOP28TODIP
A double-sided adapter board for chips with a SOP28, SSOP28 and TSSOP28 package to convert to a DIP package.
The arrow indicates where pin 1 of the chip must be soldered...
€0.50
Ex Tax:€0.41
Model: SOP8TODIP
A double-sided adapter board for chips with a SOP8, SSOP8 or TSSOP8 package to convert to a DIP package.
The arrow indicates where pin 1 of the chip must be soldered...
€0.40
Ex Tax:€0.33
Model: SOT89SOT223-SIP3
An adapter for SMD chips to DIP (actually SIP). The dot on the adapter indicates where pin 1 of the chip should be soldered.
Specifications:
Suitable chip formats: SOT89/SOT223
Pin spacing (DIP): 2.54mm
Dimensions PCB: 12.06 x 7.62mm
..
€0.40
Ex Tax:€0.33
Model: TQFP32-100TOHEADERS
A double-sided adapter board for chips with a TQFP 32-64 pins(0.8mm pin spacing) and TQFP 32-100 pin(0.5mm pin spacing) package to convert to standard headers.
The arrow indicates where pin 1 of the chip must be soldered...
€0.70
Ex Tax:€0.58
Showing 1 to 17 of 17 (1 Pages)