Menu
Your Cart

Prototyping Supplies

B-STOCK - Experiment PCB 9cm*15cm - Double sided
B-Stock
Model: B-STOCK-PCB9x15DUB
B-Stock products are products that do not (any longer) meet our standard quality, but can still be used. The reason for this and any defects are explained in more detail below. Original product: Experiment PCB 9cm*15cm - Double sided ..
€1.00
Ex Tax:€0.83
Model: HC-05BACKPLANE
This backplane is intended to solder an HC-05, HC-06, HM-10 or comparable module. This makes the RX, TX, STATE, EN pin easy to connect to the bluetooth module.   This board only ensures that the voltage on the module is brought to 3.3V (from..
€1.50
Ex Tax:€1.24
Model: SEEED-114990115
..
€6.25
Ex Tax:€5.17
Model: BB170PBLACK
A breadboard ideal for combining with an Arduino! (especially the Arduino Nano) There are 85 holes on both sides. At the bottom there is an adhesive layer for placement on a flat surface, system etc. Dimensions: 47 x 35 x 9mm  Suitable for..
€1.50
Ex Tax:€1.24
Model: BB170PBLUE
Ideal for combining a breadboard with an Arduino! (especially the Arduino Nano) There are 85 holes on both sides. At the bottom is an adhesive layer for placement on a plate, system etc. Dimensions: 47 x 35 x 9mm  Suitable for wires betwee..
€1.50
Ex Tax:€1.24
Model: BB170PGREEN
Ideal for combining a breadboard with an Arduino! (especially the Arduino Nano) There are 85 holes on both sides. At the bottom there is an adhesive layer for placement on a plate, system etc. Dimensions: 47 x 35 x 9mm  Suitable for wires ..
€1.50
Ex Tax:€1.24
Model: BB170PRED
Ideal for combining a breadboard with an Arduino! (especially the Arduino Nano) There are 85 holes on both sides. At the bottom there is an adhesive layer for placement on a plate, system etc. Dimensions: 47 x 35 x 9mm  Suitable for wires ..
€1.50
Ex Tax:€1.24
Model: BB170PTRANSP
Ideal for combining a breadboard with an Arduino! (especially the Arduino Nano) There are 85 holes on both sides. At the bottom there is an adhesive layer for placement on a plate, system etc. Dimensions: 47 x 35 x 9mm  Suitable for wires ..
€1.50
Ex Tax:€1.24
Model: BB170PWHITE
A breadboard that can idealy be combined with an Arduino! (especially the Arduino Nano) There are 85 holes available on each side. There is adhesive layer on the bottom so you can stick it on a plate or system etc. Dimensions: 47 x 35 x 9mm ..
€1.50
Ex Tax:€1.24
Model: BB170PYELLOW
Ideal for combining a breadboard with an Arduino! (especially the Arduino Nano) There are 85 holes on both sides. At the bottom there is an adhesive layer for placement on a plate, system etc. Dimensions: 47 x 35 x 9mm  Suitable for wires ..
€1.50
Ex Tax:€1.24
Model: BB270P
A breadboard ideal to combine with an Arduino! (Especially an Arduino Nano)  Both sides contain 115 connection holes and a power supply rail with 20 holes. Dimensions: 90 x 53 x 9mm  Suitable for wires between 20 and 29 AWG...
€2.50
Ex Tax:€2.07
Breadboard 400 points
2-4 Weeks
Model: BB400P
A breadboard that is idealy combined with an Arduino! For the power supply there are 100 points available, the mid section contains 300 points. There is an adhesive layer on the bottem so you can stick it to a plate or system etc. You can connect ..
€3.00
Ex Tax:€2.48
Model: BB400PTRANSP
A breadboard ideal for combining with an Arduino! There are 100 points for the power supply, the centerpiece contains 300. At the bottom there is an adhesive layer for placement on a flat surface, system etc. Two (or more) of these breadboards can..
€3.00
Ex Tax:€2.48
Model: VM-SDAD102
A breadboard with 456 points, useful for prototyping. Specifications: Material: Exterior plastic: ABS Connections: Alloy of silver and nickel Points: 456 Dimensions: 81 x 62 x 9 mm..
€7.50
Ex Tax:€6.20
Model: BB830P
A breadboard that is idealy combined with an Arduino! For the power supply there are 200 points available, the mid section contains 630 points. There is an adhesive layer on the bottem so you can stick it to a plate or system etc. You can connect ..
€4.00
Ex Tax:€3.31
Model: BB830PTRANSP
A breadboard ideal for combining with an Arduino! 200 points are present for the power supply, the center piece contains 630. At the bottom is an adhesive layer for placement on a flat surface, system etc. Two (or more) of these breadboards can be..
€4.00
Ex Tax:€3.31
Model: DEVBOARDEPS32WROVER
This is a development board for the ESP32-WROVER WiFi module. The ESP32-WROVER can easily be connected to this. With the help of this board, the WiFi module can be controlled and programmed without having to solder. This board uses a CP210..
€18.00
Ex Tax:€14.88
Model: DEVBOARD-ESP8266
This is a development board for ESP8266 Wi-Fi modules. Using this board, the Wi-Fi module can be controlled and programmed without soldering. Specifications: Compatible ESP boards: ESP-01, ESP-01S, ESP-07, ESP-07S, ESP-12E, ESP-12F, ESP-12S ..
€10.50
Ex Tax:€8.68
Model: ESP8266-12-BOARD
A handy breakout board for ESP-07 and ESP-12 with a built-in pull-down resistor on GPIO15 and a pull-up resistor on the EN-pin. The breakout board also has the option of soldering a voltage regulator on it, so that the ESP module can also b..
€1.50
Ex Tax:€1.24
Experiment PCB 15cm*20cm - Double Islands and Surrounding Lanes
New
Model: PCB15x20DUBHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture). Note: Due to the production process, some copper splinters may occur..
€3.50
Ex Tax:€2.89
Model: PCB2x8DUB
An experimental circuit board for placing and soldering components.   This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects!   Distance between holes: 2.54mm (default) Diameter holes..
€0.60
Ex Tax:€0.50
Model: PCB4x6DUB
An experimental circuit board for placing and soldering components.   This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects!   Distance between holes: 2.54mm (default) Diameter holes..
€0.70
Ex Tax:€0.58
Model: PCB5x7
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 5 x 7cm Note: This circuit board may be a bit crooked/hollow...
€0.60
Ex Tax:€0.50
Model: PCB5x7DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 5 x 7cm Note: Th..
€0.65
Ex Tax:€0.54
Model: PCB5x7DUB
An experimental circuit board to place and solder components on. This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects! Specifications: Color PCB: Green PCB type: Double sided Distance..
€0.80
Ex Tax:€0.66
Model: PCB5x7DIVERSELANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has several lanes and islands. (see image) Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 5 x 7cm ..
€0.65
Ex Tax:€0.54
Model: PCB6.5x14.5
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 6.5 x 14.5cm Note: This circuit board may be a bit crooked/ho..
€0.90
Ex Tax:€0.74
Model: PCB6.5x14.5LANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has lanes over the entire length (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 6.5 x 1..
€2.00
Ex Tax:€1.65
Model: PCB7x9
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 7 x 9cm Note: This circuit board may be a bit crooked/hollow...
€1.00
Ex Tax:€0.83
Model: PCB7x9DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 7 x 9cm Note: Th..
€0.65
Ex Tax:€0.54
Experiment PCB 7cm*9cm - Double Islands and Surrounding Lanes
New
Model: PCB7x9DUBHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture). Note: Due to the production process, some copper splinters may occur..
€2.00
Ex Tax:€1.65
Model: PCB7x9DUB
An experimental circuit board for placing and soldering components. This variant is double-sided and can be soldered from both sides. Ideal for small hobby projects! Distance between holes: 2.54mm (default) Diameter holes: 1mm    ..
€1.50
Ex Tax:€1.24
Model: PCB7x9ENK
An experimental PCB for placing and soldering components.   This variant is single-sided and can therefore be soldered from both sides. Ideal for small hobby projects!   Distance between holes: 2.54mm (default) Diameter holes: 1mm..
€1.50
Ex Tax:€1.24
Model: PCB9.5X9.5DUBACCESS
An experimental circuit board for placing and soldering components. This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects! Specifications: Distance between holes: 2.54mm (default) Diamet..
€4.00
Ex Tax:€3.31
Model: PCB9x15
An experiment PCB to place and solder components on. This is ideal for small hobby projects. Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 9 x 15cm Note: This circuit board may be a bit crooked/hollow..
€2.00
Ex Tax:€1.65
Model: PCB9x15DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 9 x 15cm Note: T..
€2.50
Ex Tax:€2.07
Model: PCB9x15DUB
An experimental circuit board for placing and soldering components. This variant is double-sided and can be soldered from both sides. Ideal for small hobby projects! Distance between holes: 2.54mm (default) Diameter holes: 1mm..
€2.50
Ex Tax:€2.07
Model: PCB9x15LANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has lanes over the entire length (see image). Specifications: Distance between holes: 2.54mm Hole diameter: 1mm Dimensions: 9 x 15c..
€2.00
Ex Tax:€1.65
Experiment PCB 9cm*15cm - Triple Islands and Surrounding Lanes
New
Model: PCB9x15TRIHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture). Note: Due to the production process, some copper splinters may occur..
€2.75
Ex Tax:€2.27
Model: M5STACK-K039
The M5STACK ATOMIC Proto Kit is a DIY proto kit designed for the M5ATOM series. The module can be connected directly via the 9 pins on an M5ATOM. The kit consists of a PCB with connection material and a housing with accessories.  Specificatio..
€11.00
Ex Tax:€9.09
Model: M5STACK-A077
The M5STACK ATOMIC Proto Kit is a DIY proto kit designed for the M5ATOM series. The module can be connected directly via the 9 pins on an M5ATOM. The kit has 2 PCBs included and a housing. Each PCB has 60 holes on which certain components can be sold..
€6.00
Ex Tax:€4.96
Model: M5STACK-K025
This is an extensive prototype module for the M5Core with a blank circuit board, power input and mounting options for wall mounting or DIN rails. This circuit board is specifically intended for the M5Stack Core and can be installed as an extra lay..
€15.00
Ex Tax:€12.40
Model: M5STACK-K026
This is an extensive prototype module for the M5Core with a blank circuit board, power input and mounting options for wall mounting or DIN rails. This circuit board is specifically intended for the M5Stack Core and can be installed as an extra lay..
€19.00
Ex Tax:€15.70
Model: M5STACK-M024
The M5Stack Bus module has extra pins and a prototype circuit board for the M5Core. Specifications: 30 pins (2x15) for input and output Circuit board: 200 holes, 2.54 mm pitch Package Contents: 1x M5 Stack BUS Module..
€6.00
Ex Tax:€4.96
Model: M5STACK-U064
This is a module with a small prototyping board and a Grove connection for M5Stack.  Specifications: Circuit board: 40 holes Pin distance: 2.54mm 2x LEGO® compatible holes 1x Grove connection (1x Grove cable included) Package..
€3.00
Ex Tax:€2.48
Model: M5STACK-K011-B
This is an prototype module for the M5Core with a blank circuit board, power input and mounting options for wall mounting or DIN rails. This circuit board is specifically intended for the M5Stack Core and can be installed as an extra layer on it. ..
€13.00
Ex Tax:€10.74
Model: M5STACK-M032
This is a prototype module with a height of 13.2mm for the M5Stack ESP32 Core and Core 2 with a blank printed circuit board, header pins and other connectors that connect the M5Stack Core. These headers are not connected to pins on the PCB. This c..
€5.00
Ex Tax:€4.13
Model: M5STACK-U060
The Proto Hat is an add-on for the M5StickC*. This module has an experiment PCB with 40 holes on which various components can be soldered**. Specifications: Circuit board: 40 holes Pin spacing: 2.54mm (0.1 inch) Package contents: ..
€3.50
Ex Tax:€2.89
Model: M5STACK-M001
This is a prototype module for the M5Stack ESP32 Core with a blank circuit board and header pins that connect the M5Stack Core. These headers are not connected to pins on the circuit board. This board is specifically intended for the M5Stack Core ..
€5.00
Ex Tax:€4.13
Model: M5STACK-U060-B
The Proto Plus Hat is an add-on for the M5StickC*. This module has an experiment PCB with 168 holes on which various components can be soldered. Specifications: Circuit board: 168 holes Pin spacing: 2.54mm (0.1 inch) Package contents:..
€3.00
Ex Tax:€2.48
Showing 1 to 50 of 76 (2 Pages)
1
false
true
true
Remove
Change
tr