Model: EM4100TAG
EM4100 key tag for the RDM630 RFID reader.
Frequency: 125kHz
Color: Blue..
€0.80
Ex Tax:€0.66
Model: M5STACK-A073
Brand: M5Stack
This M5Stack RFID card is compatible with S50 Mifare readers.
Specifications:
Operating frequency: 13.56MHz
Storage: 1KB
Detection distance: <10mm (depending on the reader)
Operating temperature: -20 - 50°C
Dimensions: 85.5 x 54 x..
€3.00
Ex Tax:€2.48
Model: M5STACK-U031-B
Brand: M5Stack
This is a module with an RFID chip reader and a Grove connector from M5Stack.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3V
Communication: I2C
Default I2C address: 0x28 (not changeable)
RFID:
Chip: WS1850..
€8.00
Ex Tax:€6.61
Model: M5STACK-U107
Brand: M5Stack
This is a module with a UHF-RFID reader and a Grove connection for M5Stack. UHF-RFID makes it possible to read multiple UHF-RFID tags at a longer distance, this can be used, for example, to locate goods.
Specifications:
RFID chip: JRD-4035
..
€92.50
Ex Tax:€76.45
Model: PYCPYSCAN
With the Pyscan from Pycom you can easily equip your WiPy, LoPy, SiPy, FiPy or Gpy with a RFID-NFC sensor, accelerometer and light sensor.
Specifications and features:
Accelerometer: ST LIS2HH12
Light sensor: Lite-on LTR-329ALS-01
RFID/N..
€35.00
Ex Tax:€28.93
Model: RDM6300
This RFID reader reads 125kHz RFID tags with the EM4100 protocol (such as the EM4100 Key Tag).
Specifications:
Input voltage: 5V
Input current: 50mA
Frequency: 125 kHz
Baud rate: 9600
EM4100 protocol compatible
Output: Serial..
€5.00
Ex Tax:€4.13
Model: RC522
With this RFID kit you can read Mifare tags and cards for your project.
Specifications:
Supply voltage: 3.3V DC
Continuous Current: 13-26mA / DC 3.3V
Idle Current: 10-13mA / DC 3.3V
Sleep current draw: <80uA
Peak current: <30mA..
€8.50
Ex Tax:€7.02
2-4 Weeks
Model: PN532MODKIT
This PN532 RFID module can also send data via NFC, in addition to sending and receiving Mifare tags.
The module can be controlled via SPI, I2C or UART.
Specifications:
Chip: NXP PN532
Voltage: 3.3 - 5V DC
Supports various RFID products ..
€6.00
Ex Tax:€4.96
2-4 Weeks
Model: WRISTBAND-TK4100-BELT
A blue wristband with a belt buckle clasp that has a 125kHz TK4100 chip. The TK4100 is compatible with EM4100/EM4102/EM4200 chips and can be read with the RDM6300 RFID reader. The chip cannot be reprogrammed, it can only be read.
Specificatio..
€3.00
Ex Tax:€2.48
Model: WRISTBAND-TK4100-ELASTIC
A blue wristband with an elastic band that has a 125kHz TK4100 chip. The TK4100 is compatible with EM4100/EM4102/EM4200 chips and can be read with the RDM6300 RFID reader. The chip cannot be reprogrammed, it can only be read.
Specifications:
..
€3.00
Ex Tax:€2.48
Model: WRISTBAND-TK4100-SNAP
A blue wristband with a snap fastener that has a 125kHz TK4100 chip. The TK4100 is compatible with EM4100/EM4102/EM4200 chips and can be read with the RDM6300 RFID reader. The chip cannot be reprogrammed, it can only be read.
Specifications:
..
€3.00
Ex Tax:€2.48
Model: S50STICKER
An S50 Mifare tag sticker.
Specifications:
Diameter: 25 mm
Thickness: 0.1 mm
Frequency: 13.56 MHz
Distance: 1-10 cm..
€1.00
Ex Tax:€0.83
Model: SEEED-113020002
An RFID reader module from Seeed Studio suitable for reading EM4100 compatible RFID cards/tags.
Specifications:
Supply voltage: 4.75 - 5.25V DC
Signal voltage: 4.75 - 5.25V (same as supply voltage)
Communication:
Interface: UART
..
€16.00
Ex Tax:€13.22
Showing 1 to 15 of 15 (1 Pages)