Menu
Your Cart

USB

Model: 6TO10AVRISP
An adapter that makes it easier to program your arduino with an AVR ISP programmer. The pinout is written on both sides of the circuit board...
€1.50
Ex Tax:€1.24
Model: ESP01CH340USB
A simple USB to serial converter to communicate with an ESP-01 module. Specifications: 3.3VTTL voltages Chip: CH340 (drivers) See the images for the connection orientation. Note: The ESP-01 module is not included. It is also possib..
€2.50
Ex Tax:€2.07
Model: CH340USB
A simple USB to serial converter with selectable voltage through a jumper. Specifications: 3.3V-5V TTL voltages Converts TTL logic levels to computer RS232 levels Power supplies: 5V, 3.3V, GND (min) RX (3.3V-5V) TX (3.3V-5V) Chip: CH3..
€2.50
Ex Tax:€2.07
CH340E TTL USB to Serial Converter - 3.3-5V
New 2-4 Weeks
Model: CH340EUSB
A USB to serial converter that can be configured for 3.3V and 5V using a jumper...
€2.50
Ex Tax:€2.07
Model: ESPLINKV1.0
This ESP LINK can be used for firmware upgrades, serial port debugging and programming the ESP8266 ESP-01(S). This ESP LINK is supported by the "Arduino IDE", "ESP8266Flasher" and "Espressif Flash Download Tools". The ESP8266 ESP-01(S) can go directl..
€4.00
Ex Tax:€3.31
ESP LINK V2.0 - ESP8266 ESP-01(S) Programmer
New Discontinued
Model: ESPLINKV2.0
This ESP LINK can be used for firmware upgrades, serial port debugging and programming an ESP8266 ESP-01(S). This ESP LINK is supported by the "Arduino IDE", "ESP8266Flasher" and "Espressif Flash Download Tools". The ESP8266 ESP-01(S) plugs directly ..
€3.75
Ex Tax:€3.10
ESP-PROG - Programmer for ESP32 and ESP8266
2-4 Weeks
Model: ESP-PROG
This ESP Programmer is a handy module for programming and debugging an ESP32 or ESP8266. In addition, the JTAG debugging function is available for ESP32. The programmer is easy to connect to a computer using the Micro USB port. This ESP programmer ha..
€18.50
Ex Tax:€15.29
Model: ESP32-CAM-MB
This is a shield that has been specially developed for the ESP32- CAM - WiFi and Bluetooth Board with OV2640 Camera. The ESP32-CAM is a very handy module, but it lacks a USB connection that makes it easy to upload new code. Due to the USB connection ..
€2.75
Ex Tax:€2.27
Model: FT232USBCABLE
You can call it the most reliable USB to serial converter that you can find! Many operating systems support this standard chip. If it does not install automatically, then look for the driver for your operating system here . Specifications: ..
€11.00
Ex Tax:€9.09
Model: FT232USB
The most reliable usb to serial converter that you can find! This is almost indispensable if you want to be able to program Pro Mini (automatically) . Many operating systems support this chip by default. If it is not automatically installed, pleas..
€8.50
Ex Tax:€7.02
Model: LILYGO-H494
The TTGO T-U2T from LilyGO is a USB to serial converter with USB-C connector which can be used (or even required) to program certain boards from LilyGO TTGO...
€6.50
Ex Tax:€5.37
Model: LILYGO-H439
This USB to serial converter is suitable for programming the LilyGO TTGO T-Internet PoE. Specifications: Connector: USB-C and micro USB USB to serial converter: CH340C Dimensions: See images CH340 drivers: Windows Mac OSX ..
€3.50
Ex Tax:€2.89
Model: LILYGO-F308
This "USB stick" from LilyGO can be used to simulate USB devices, such as a keyboard. The USB can be programmed in Arduino IDE...
€10.50
Ex Tax:€8.68
Model: M5STACK-A105 Brand: M5Stack
The ESP32 downloader kit from M5Stack is a USB to serial adapter module that is ideal for programming or debugging an ESP32 and ESP8266. In addition to the standard RX and TX pins, the module also has connections for GPIO 0 and the enable pin of the ..
€8.00
Ex Tax:€6.61
Model: M5STACK-M020 Brand: M5Stack
The M5Stack USB Module is an expansion for the M5Core. This module adds a USB-port (type A), 10 GPIO pins and 2 power outputs each for 3.3V and 5V to the M5Core.  Specifications: For use with the M5Core MAX3421E Peripheral/Host Contro..
€15.50
Ex Tax:€12.81
Model: PL2303HX
Specifications: 3.3V-5V TTL voltages Converts TTL logic levels to computer RS232 levels Power supply: 5V, 3.3V, GND (min) RX (3.3V-5V) TX (3.3V *) GND (min) * 3.3V is in most cases enough voltage to drive 5V modules/chips. Not..
€2.50
Ex Tax:€2.07
Model: PL2303TACABLE
A USB to serial TTL adapter with the PL2303TA chip. Specifications: 3.3V-5V TTL voltages Converts TTL logic levels to computer RS232 levels Red: +5V White: RX (3.3V-5V) Green: TX (3.3V *) Black: GND (min) Cable length: about 100c..
€6.00
Ex Tax:€4.96
Model: STLINKV2-COMP
The ST-LINK V2 Compatible is an in-circuit debugger and programmer for the STM8 and STM32 microcontrollers. Package content: 1x ST-LINK V2 Compatible 1x 4p female -> 4p female dupont cable Tools for the ST-LINK V2: Driver + Fi..
€7.50
Ex Tax:€6.20
Model: USBHOSTSHIELD
This shield can easily be placed on an Arduino Uno, Arduino Mega or Arduino Due. The shield makes a USB host of the microcontroller such that, for example, a mouse or keyboard can be connected to the Arduino. The following types of devices are sup..
€17.50
Ex Tax:€14.46
Model: USBASP
A programmer to provide your AVR with new software. For example, if you want to burn a new Arduino bootloader into an AVR chip. A 10 pin flatcable with connectors is included. This works well in combination with the adapter to 6-pins for your Ardu..
€4.50
Ex Tax:€3.72
Waveshare CH343G TTL USB to Serial Converter - 3.3-5V
New
Model: WS-21442 Brand: Waveshare
A USB to serial converter that can be configured for 3.3V and 5V using a jumper. If the jumper is completely removed, it is also possible to connect an external power supply to the VCCIO pin, making the module compatible with other voltages from 1.8V..
€4.00
Ex Tax:€3.31
Waveshare FT232RL TTL USB to Serial Converter - USB-A - 3.3-5V
New
Model: WS-6170
A USB to serial converter that can be configured for 3.3V and 5V using a jumper...
€7.50
Ex Tax:€6.20
Waveshare FT232RL TTL USB to Serial Converter - USB-C - 3.3-5V
New
Model: WS-20646
A USB to serial converter that can be configured for 3.3V and 5V using a jumper. ..
€7.50
Ex Tax:€6.20
Waveshare Industrial TTL USB to Serial Converter - CH343G
New
Model: WS-21550
A USB to serial (UART) converter...
€5.50
Ex Tax:€4.55
Waveshare PL2303GS TTL USB to Serial Converter - USB-A - 3.3-5V
New
Model: WS-20265
A USB to serial converter that can be configured for 3.3V and 5V using a jumper. If the jumper is completely removed, it is also possible to connect an external power supply to the VCCIO pin, making the module compatible with other voltages from 1.8V..
€4.00
Ex Tax:€3.31
Waveshare PL2303GS TTL USB to Serial Converter - USB-C - 3.3-5V
New
Model: WS-20645
A USB to serial converter that can be configured for 3.3V and 5V using a jumper. If the jumper is completely removed, it is also possible to connect an external power supply to the VCCIO pin, making the module compatible with other voltages from 1.8V..
€4.00
Ex Tax:€3.31
Showing 1 to 26 of 26 (1 Pages)
1
false
true
true
Remove
Change
tr